Пікірлер
@MikeRoss-zv9nm 7 минут бұрын
After this fix, your regular Milwaukee charger still charges these batteries correctly after using your battery? Are they still working for you?
@fixer2u 2 минут бұрын
Yes the Milwaukee fast charger still works. I have had to repeat this process like every 3 months though.
@michaelstjohn2617 3 күн бұрын
Did u try a sea foam type product first to see if that helped and how did u prime the injectors after cutting off the fuel supply, thanks for ur advice and always enjoy ur videos, very helpful for my own R tractor.
@fixer2u 3 күн бұрын
I did not try seafoam, but that is not a bad idea! I just changed the oil though so not really looking forward to doing it again! To prime, you go to the fuel filters and there are priming plugs above each plus on in between. You take out the left plug until you get a steady stream of fuel. Then do the right plug, then do the center. At that point you should be primed. Have a full tank of fuel in there also as the extra head pressure helps.
@cahcah3194 6 күн бұрын
should have done something about rusty frame wth...
@fixer2u 4 күн бұрын
It was only surface rust and I was trading the truck in so wasn't really worth it.
@mrstl3000 8 күн бұрын
Did u have to drive car to wake up sensors before training
@fixer2u 8 күн бұрын
I did not.
@MarkEichin 8 күн бұрын
Just fixed an XC8.0 with a $30 "MiBOXER 18650" charger I had lying around from flashlight games. Definitely important that it's a current-limiting charger, but at 200mA nothing even got warm. Thanks for the video!
@fixer2u 8 күн бұрын
Awesome! Glad it worked!
@michaelpouchert4486 11 күн бұрын
I had 4 of 5 cells low. Charged all of them individually and the battery is like new. Thank you
@fixer2u 11 күн бұрын
Excellent! Glad it helped! Thanks for the comment!
@michaelpouchert4486 10 күн бұрын
@@fixer2u I have other batteries blinking 1 bar and I was experimenting and fried my charger. Have you tried to charge cells with another fully charged battery?
@fixer2u 10 күн бұрын
@@michaelpouchert4486 I know you can do it. To me it seemed more efficient to use the charger, but it can be done.
@timwade8629 11 күн бұрын
Thanks for this vid! I bought the same charger to revive two 8.0s. It brought one of them back, but on the other one, all banks read 4.19v but only 3 of the leds light up.
@SteveSherman-jp1dz 11 күн бұрын
It could also be a burned out LED. Another common problem.
@fixer2u 11 күн бұрын
Hrmmm that is odd.... Maybe the 4th LED is burnt out? Does the battery seem to have the proper life?
@kevinbriggs2611 12 күн бұрын
Great video! Thanks so much! I am regretting throwing away two of my 5 aH Milwaukee batteries that I couldn't get to hold a charge. Now I know!!!!
@fixer2u 12 күн бұрын
Thank you! Sorry for your loss!
@Scottchmorsco 12 күн бұрын
worked like a charm on my unbalanced 8 amp hour m18. working on a 9 now... wonderful
@fixer2u 12 күн бұрын
Awesome! Glad it worked!
@Mike-zm8jm 13 күн бұрын
Why wouldn't you show the removal & replacement of the actual part???
@fixer2u 12 күн бұрын
I tried to film it butnitbwas tight quarters. Needed both hands so you couldn't see anything anyways.
@calcolson2813 14 күн бұрын
I charge all 5 banks to the same voltage
@fixer2u 14 күн бұрын
Nice! That is probably the best idea. Had the first one dropped at all by the time you finished the last?
@tonywyant8957 14 күн бұрын
U have any ideas or pics of ur entry door on how to do a diy door latch. I need something to operate from the inside or outside.
@fixer2u 14 күн бұрын
I just have a padlock latch on the outside and a hook and loop latch on the inside.
@Kershaws2014 16 күн бұрын
Did you have to put something behind the hinge side that attaches to the blind to make the top of the window sit flat along the top edge?
@fixer2u 16 күн бұрын
I did not.
@robdittes5228 17 күн бұрын
Oh.. you watched bleepin jeep last week, too. Nice!!😂
@fixer2u 17 күн бұрын
I am not sure what you mean?
@robdittes5228 17 күн бұрын
Matt from The KZfaq channel Bleepin' Jeep did basically the same video a week ago. Look it up.
@fixer2u 17 күн бұрын
@@robdittes5228 ahh ic. I actually filmed this back in the middle of April so just a coincidence!
@robdittes5228 17 күн бұрын
@fixer2u I really like the concept. I am a cabinet builder and finisher. I've been with the same builder for over 30 years. When I was first starting out in the business, I was friends with an old finish carpenter who had built his own cabin out in the woods. He cut trees off of the property and used them for the wood. He told me that he used diesel fuel mixed with gear lube to preserve everything... I can't imagine the smell it made. I never forgot that story.
@fixer2u 17 күн бұрын
@@robdittes5228 Oh wow that is really cool! Yeah there was definitely a smell to this trailer for a couple of weeks, but now I do not smell it at all. That is brave using that on a cabin especially if you have a wood stove!
@TXMustangGT 18 күн бұрын
Any chance you may have the specs or drawing for the crankshaft? I contacted the company you sent yours to and they requested a drawing for specs…….I’m rebuilding the pony on my Model R as well…. Keep up the great work with your videos!
@fixer2u 18 күн бұрын
I actually do not..... If you call H&J machining. He may have the info you need. handjmachining.com/index.htm
@rob10424 19 күн бұрын
Awesome video...I just ordered the next available version of the charger (Opus C3400). What guage / type wire did you use for the leads?
@fixer2u 18 күн бұрын
14 gauge braded. I wouldnt go much thinner!
@Xplorer228 19 күн бұрын
What about the rust on the inside? How do you go about that? Or did you?
@fixer2u 19 күн бұрын
You can use the same method. I didnt really bother since you can't see it.
@Xplorer228 19 күн бұрын
@@fixer2u probably still a good idea though considering the rust can eat through from the inside.
@fixer2u 19 күн бұрын
@@Xplorer228 yeah true. I mean you can still get in there with a wirewheel or wire brush and the exhaust manifold paint will work in there too. Its rated for 2000F.
@josephpadula2283 20 күн бұрын
I have a 1964 430 but it looks very much like your. 311. I do not see the source of the parts in the description as you mentioned .
@fixer2u 20 күн бұрын
Hrm..... Apparently youtube took it down for some reason... Ill have to find them again
@philantemalone9675 20 күн бұрын
I have two battery s that did this and they killed a tapid charger and two regular ones
@fixer2u 20 күн бұрын
Did you charge one cell at a time?
@philantemalone9675 20 күн бұрын
@@fixer2u well I wanted to say I opened a new charger and two of the batteries charged a few months ago to three bars and worked fine but my girl plugged that charger in and left it, And yesterday it drained one of the batteries and now I used it to try to charge the other and it's not working I tried charging other things on the charger but it shines green on the 12 volt side with nothing on it and it just shines green on the 18 v side whenever something is plugged in so I think my charger is trash now and for some reason my rapid charger isn't even lighting up when I plug it in but once I get it to three bars again I'mma use your method to see if I can save the batteries but is there a local store I can buy the battery charger at if not is yours the 3100 or the 3400? Also do you think I need to buy new chargers or is it fixable thing for the chargers as well, and does this method work 100 percent of the time?
@fixer2u 20 күн бұрын
@@philantemalone9675 I cant help you with your chargers. I have not had anything go wrong with mine. I also cannot help you with your local store question. I personally have not seen a charger like this in a local store. For me this has worked 100% of the time with my batteries.
@philantemalone9675 20 күн бұрын
@@fixer2u nice well even the one awnser was a huge help and greatly appreciated but I was wondering tho which model battery charger it is because and if it doesn't matter between the models I'd but the cheaper there was two different from that brand on Amazon but thank you very much this definitely is a huge help I'm such a non wasteful person and I can't see myself wasting hundreds of dollars on batteries but why does this happen just from non use I did have those batteries sitting for a few years?
@fixer2u 19 күн бұрын
@@philantemalone9675 there is a link to the charger I used. This happens because the Milwaukee fast chargers dont balance the cells.
@triggeredleftyvegan6004 22 күн бұрын
Great video mate it was very clear and easy to follow. Can't wait to fix a couple of faulty batteries I have here.
@fixer2u 22 күн бұрын
Thank you for the comment! How it helps!
@Scottchmorsco 23 күн бұрын
Best video on this...
@fixer2u 23 күн бұрын
Thank you!
@Mega_Bytes 23 күн бұрын
Did you put the jack on the axle??
@fixer2u 23 күн бұрын
On the lower control arm, then put a jack stand under the frame.
@FrenchmansFlats51 24 күн бұрын
the problem is the fast charger, switch to an old slow one and the problem goes away
@fixer2u 24 күн бұрын
I agree, I don't happen to have one. I would guess, the old one balances the cells.
@lincolnswaby3102 26 күн бұрын
thank u it works but what i use to charge it is a usb charge port
@fixer2u 26 күн бұрын
How do you do that?
@macdoctor562 Ай бұрын
Love the video but a little long winded.
@fixer2u Ай бұрын
Thanks for the comment!
@jeffreyhagelin3672 Ай бұрын
You might want to loosen the track before you tackle the front drive
@fixer2u Ай бұрын
I am not sure what you mean? Why is that?
@oldhess Ай бұрын
My hd 12's are the only batteries from milwaukee ive wver had this problem with
@fixer2u Ай бұрын
Some of my 9ah have this and some don't.
@kaufmankdk Ай бұрын
Battery Issue. The Fix is Place a Jumper from bad battery to a good charged battery. Pos + to Pos + and Neg - to Neg- terminals wait for about 15 minuets for battery to equalize. problem solved. both batteries are ready for work or charge to full
@fixer2u Ай бұрын
I have tried that method and even left the batteries hooked up for an hour. It was not successful.
@Kozent15 Ай бұрын
I did a brake job this winter and my tire was so seized on I had to actually loosen the lugs, then go for a drive and do a couple hard stops to loose the wheel, it worked, but damn that thing almost killed me before I thought of that, it would not budge and I even had friends come try. Harbor Freight has a cheap tire changer that has a bead breaker built in, very good tool especially with duckbill mod.
@fixer2u Ай бұрын
Yeah that truck has been stuck worse for sure I have had a much harder time in the past. I have seen that tite changer but I might only use it once every couple of years....
@naughtysmurf64 Ай бұрын
Tire lugnut torque is 150 lbs.
@fixer2u Ай бұрын
Thanks! I use a couple three uga dugas! ;)
@georgedavall9449 Ай бұрын
This Man deserves a new Fluke, or at the very least, a new Klein MM. 😊 I am going to try this on a couple of my M18 XC batteries that give the ‘Christmas lights’ when placed on the charger, as well as a couple of my M18 8.0 HO ( expensive ) batteries with the full charge showing only 3 bars. I have a NiteCore charger that will charge LiIon batteries up to 21700 in size, so will try this. I have scrap dowels lying about, so will give it a go. I’m thinking the NiteCore charger will suffice?? What say You? Much appreciated! 👍
@fixer2u Ай бұрын
Thank you! I would think your charger will work!
@georgedavall9449 Ай бұрын
E. X. C. E. L. L. E. N. T.
@fixer2u Ай бұрын
Thank you!
@vegeta420z6 Ай бұрын
Well I'll be. Always nice when its a cheap easy fix. New spark plug boot and wire and should be good to go.
@fixer2u Ай бұрын
Yup! I happened to have one laying around . Too bad I bought a carb kit for $70 last year to try and solve this problem!
@donroja Ай бұрын
I had a bank (M18 12AH) @ 3.67 and it took almost 12 hours to get just below 4.2... Is that normal, in the video you mentioned an hour? Great video by the way, thank you.
@fixer2u Ай бұрын
Thanks for the comments, what did you have the amps set at on the charger? Mine has taken that long. Since I have published this video, I have had to do this on other batteries.
@MrTimmmers Ай бұрын
Great video. Thanks.
@fixer2u Ай бұрын
You are welcome! Hope it helps!
@dennytriangle5160 Ай бұрын
google must be listening lol, just offered to help fix a family friends kitchenaid that was leaking oil yesterday and now your brand spanking new video gets recommended to me today. Thanks for the upload!
@fixer2u Ай бұрын
Oh wow! That is too funny! I hope it helps!
@JW-nf2jr Ай бұрын
Thank's for the video. I will be doing this fix as well since we have the same problem with it leaking. I will be using this as a reference. Once again thanks for the video.
@fixer2u Ай бұрын
No problem! Hope it helps!
@RottBit77 Ай бұрын
Ui vey! I can't keep watching this "procedure"...
@fixer2u Ай бұрын
I am not quite sure what you mean?
@tonybundy9393 Ай бұрын
Yeah u don't need to do the inside of the stove man. U'll never see it
@fixer2u Ай бұрын
ITs not a matter of seeing it, I wanted to stop the rust as best I could. I have seen wood stoves rust through believe it or not.
@patterdalezipsuzilil Ай бұрын
Coloured tester leads are best 😂
@fixer2u Ай бұрын
You've got to work with what you've got!
@Priority57 Ай бұрын
So do I have to do this everytime when I charge my battery? Seem like it's not worth having a battery power tool.
@fixer2u Ай бұрын
No you do not need to do this every time. I have had to do this twice in a 12 month period.
@michaelpouchert4486 28 күн бұрын
You can do this with a car battery or battery charger. Make a jumper and charge both banks at the same time
@fixer2u 28 күн бұрын
@@michaelpouchert4486 if that charger is rated for lithium batteries. it is very dangerous if it is not.
@bethmotgomery2662 Ай бұрын
GET A 12 VOLT STARTER!!!!!!!! Pesky ponies, DEERE'S MOST STUPIDEST IDEA YET!!!!!!! WASTE OF GAS AND TIME TO START I'D SAY!!!!!! That's why I hate pony motors in general.
@fixer2u Ай бұрын
LMAO A little late! I have never heard of a 12V starter for an R. I have seen 24v
@bethmotgomery2662 Ай бұрын
Ok 24 volt starters then BUT YOU KNOW WHAT I MEAN!!!!!! If I had some 2 cylinder diesels, I'd have electric starters installed on them. They are more efficient than them Pest motors you call ponies. At least I will give them pest motors to the Amish and see how they like em. See how thoughtfully I am?
@fixer2u Ай бұрын
@@bethmotgomery2662 LOL I see what you mean!
@RTMcFly 2 ай бұрын
What is the name of the heat shrink wire splicing kit you showed toward the end of the video called?
@fixer2u 2 ай бұрын
Look on amazon for "solder seal wire connectors" there are a ton of them. Kd just read reviews to see which ones seem to be better than others.
@RTMcFly 2 ай бұрын
Have you tried ice/heat when dealing with difficult seized bolts? Ice on the bolt, torch around the bolt - something I've seen my dad do a couple times but not certain I've seen others do. Clever on welding a nut to the bolt!
@fixer2u 2 ай бұрын
Yes I have used a torch before. 2 problems in this situation. First a couples of the bolts are located right by the plastic gas tank. Dont want to use fire there! Second, the nuts were in hard to reach areas so would be a pain to get to with the torch anyways!
@WoodchuckNorris.8o 2 ай бұрын
Thank you! I got two batteries with this issue, very frustrating considering how much you pay for them
@fixer2u 2 ай бұрын
Agreed! Hopefully it helps you!
@joussecamille7589 2 ай бұрын
Nice trick Fixer2u 👍 Help me undestand how it worked. I havent got charger but I just save my 5Ah with 2 wire 1,5mm2 connected from one batterie fully charge to an oder one over discharged for 1min without opening anything. After that the Milwaukee charger works. The batterie has just 3 months .. ( I lost the garanty) Don you think using this methode with different battery capacity could be risky ...? Thanks for your works from France !
@fixer2u 2 ай бұрын
Sorry I am not sure I quite understand your question?
@megadethguym7977 2 ай бұрын
I just found a better way to fix it. I buy a new one then return the one that doesn't work and get my money back. Did it twice already at home depot
@fixer2u 2 ай бұрын
Haha nice!
@1408amac 2 ай бұрын
Does that charger automatically set itself to 4.2 or do you have to manually set the voltage? I just bought a 12amp battery and it’s doing this exact same thing
@fixer2u 2 ай бұрын
I automatically says "FULL" at 4.2V.
@1408amac 2 ай бұрын
Awesome just ordered that same charger thanks so much
@fixer2u 2 ай бұрын
@@1408amac You're welcome! Hope it works!
@katstoudt 2 ай бұрын
thank you for making my life so much simpler and saving me $260!!!! for the tire place to sell me 4 sensors and program them.
@fixer2u 2 ай бұрын
Glad it helped!
@user-wz7ec7nz2k 2 ай бұрын
Okay what if my batteries stone cold dead? How could I fix it then?
@fixer2u 2 ай бұрын
Does it say all the cells are dead?