St Nix Farms

Пікірлер

@SRCardow1 7 күн бұрын

Also, Note: Apply dielectric grease to battery posts to prevent corrosion.

@SRCardow1 7 күн бұрын

Did you remove the 7.5 amp fuse? Noticed it looked like you touched terminals to generator frame when cleaning. Believe it is recommended when servicing.

@KimMcConnell-dd1uu 7 күн бұрын

Can’t wait to see the completed project!

@showtime813 13 күн бұрын

Awesome video!!

@danielmeyer403 16 күн бұрын

Good job connecting to the draw bar and not the 3ph. Can't flip over that way with the pull point lower than the axle.

@GizmoTucker 19 күн бұрын

Thank you

@DanielRoseberry-ye9ff 22 күн бұрын

nice work thanks for sharing your work

@StNixFarms 20 күн бұрын

Thank you and I hope you enjoyed and got something from our video.

@That_one_gurl13972 Ай бұрын

I saw your account name on the back of a truck I typed it in new I'm here :)

@StNixFarms 27 күн бұрын

Well thank you so much for subscribing. I hope you find something interesting from time to time.

@pentex3 Ай бұрын

Hallelujah. I am so happy for your excellent video. I am confident I have all I need to service my battery!!

@StNixFarms 27 күн бұрын

Yes, I do too. Have a great one and enjoy your generator.

@lefty1024 Ай бұрын

Hell no. Had a recall on the bolt for propeller and shop has had mine now for 35 days, still not back.

@StNixFarms Ай бұрын

What shop did you have to take it to? Authorized dealer? Just wondering.

@wildcardfever1089 Ай бұрын

& I like your truck

@StNixFarms Ай бұрын

Thank you, I really appreciate it and thanks for watching our channel.

@wildcardfever1089 Ай бұрын

I’m right behind you right now

@StNixFarms Ай бұрын

Never know who is following you. Thanks so much.

@Leo363615 Ай бұрын

Great information 🎉🎉

@StNixFarms Ай бұрын

Thank you, and thanks for watching our channel.

@scottfreemanfamily Ай бұрын

Going to work on my Gererac in a few days. Great Video. Question: After the battery is disconnected, Do you have to re-enter any configuration in the menu?

@StNixFarms Ай бұрын

That is a great question. I didn't and I don"t know where the backup is.

@symbionesesla 2 ай бұрын

When checking battery I always use my multi meter to check battery voltage when the terminals are disconnected. It should read 12 volts when its not being charged with the systems trickle charger. Great video thanks for sharing,

@StNixFarms Ай бұрын

Thanks for watching and I appreciate your comment. Larry

@isisobrien7870 2 ай бұрын

Thank you so much for this video. Our battery just died and we couldn't figure out where the battery was located. Saved us before the storms start this week.

@StNixFarms Ай бұрын

Thanks so much for watching. I am glad the video was of some help to you. Larry

@mississippioutpost2895 2 ай бұрын

Good Job 👍

@StNixFarms Ай бұрын

Thanks so much for watching. The fuel tank issue has been a challenge. I appreciate your comment. Larry

@outsidewithrodney8240 2 ай бұрын

The boards underneath your sawmill going left to right and you cut out around the feet. Does the boards have anything to do with structure?

@StNixFarms 2 ай бұрын

Only from the standpoint of a platform to hold my toe jack which is an ATV jack and a place to lay things. Also a place to walk on when putting my lubrication container and putting gas in the mill. Again just a good platform for things.

@NaughtyGoatFarm 2 ай бұрын

Were these from a company called vevor?

@StNixFarms 2 ай бұрын

No, they were from Amazon with a brand name of Anisun.

@PoisonShot20 3 ай бұрын

Ate they LED?

@StNixFarms 3 ай бұрын

No they are not LED. John Deere does not offer an LED kit. Only available aftermarket. They seem to be bright enough for my work.

@wirenut9062 3 ай бұрын

Youre not supposed to hard pipe the electric directly to the generator like that

@StNixFarms 3 ай бұрын

These were authorized Generac installers so I am going to assume they knew what they were doing. Thanks for watching. This group has installed several units just in my immediate area and come highly recommended.

@wirenut9062 2 ай бұрын

@StNixFarms the generator vibrates. You use liquid tite and a flex outdoor gas line. Good luck

@aaronmatsumoto1142 3 ай бұрын

Awesome video. Just completed my battery maintenance. Thanks

@StNixFarms 3 ай бұрын

Thanks so much for watching. I hope the video was helpfuld.

@nickshaffer6233 3 ай бұрын

Thank you for the video! Do you know what to do if the transmission lever will not move at all ? At the transmission, I cannot move the shifter out of 4HI. I just topped off to the correct level. Any advice ?

@StNixFarms 3 ай бұрын

This particular Gator has issues that I think are the result of some poor engineering. I am not an expert by no means on the machine and have a mechanic from my John Deere dealership that advises me on mine and the issues I have with it and what to do. Sorry I cannot be of any help.

@jeffreymcconnell4622 3 ай бұрын

Love the music

@StNixFarms 3 ай бұрын

Thanks you so much for watching and I try to put a lot of thought in the music and how it helps convey the message of the video. It means a lot to know that occasionally it fits.

@KimMcConnell-dd1uu 3 ай бұрын

Love it!!

@StNixFarms 3 ай бұрын

Thank you Berly Dawn. I really do like it and yet Nana has trouble getting in and out of it. She says she climbs in and falls out. Hope to see you soon.

@unyanhead6074 3 ай бұрын

Great Job! I really could have used these on mine tonight. I guess it's time to get to get them ordered.

@StNixFarms 3 ай бұрын

Thanks so much for watching our channel. The lights have worked great so far. A necessary addition for late evening work.

@richewing9228 3 ай бұрын

Great info. Just starting to put my mill together and getting some ideas. I just wished I would have watched your video a week ago as now I am ripping apart what I did so far and incorporate some of your ideas in mine.

@StNixFarms 3 ай бұрын

Thank you so much for watching the video. I am glad that I was able to give you some ideas. Other KZfaq sawmillers have given me some ideas the same way. (Some before and some after)

@user-ix4dl1dy7q 4 ай бұрын

Gave you a sub from Upstate New York. I should be number 1000 !

@StNixFarms 4 ай бұрын

Thank you so much. Could you send me your email @ [email protected].

@rifleman7313 4 ай бұрын

I have noticed that some people mount the aggressive tractor style tread in reverse in some low speed mud trucks. I figure that there must be a reason for doing this. However, I cannot exactly figure it out. Does anyone know why they do this?

@StNixFarms 4 ай бұрын

I don't know the answer for your qustion.

@johntillotson4254 4 ай бұрын

Thx for sharing

@StNixFarms 4 ай бұрын

Thanks for watching!

@carsonfancher5889 4 ай бұрын

Unless u knock the set out and u know by the streak made in the wood of a set is out u shouldn’t have to set every timw

@StNixFarms 4 ай бұрын

Thanks so much, that is helpful.

@PeeksPeakHobbyHomestead 4 ай бұрын

I am getting ready to start building my mill shed and this is almost the exact design I have planned. I have watched a lot of mill shed videos and this is the first one I have found to match when I am planning. I appreciate you sharing yours. This helps me visualize what I am going for. Nice work!

@StNixFarms 4 ай бұрын

And the finished shed has worked really well for me. Thanks for watching.

@TheKevlar 4 ай бұрын

I am building a sawmill shed this summer and will include a power winch in the design...

@StNixFarms 4 ай бұрын

It is truly a back saver. Money well spent.

@bbbnz50 4 ай бұрын

Nice job , when turning the log dont have winch directly above log, have it more over the back of mill, turns much more easily,,, Just saying

@StNixFarms 4 ай бұрын

Thanks so much. I'll try that.

@TractorTimewithTim 5 ай бұрын

Looks great! We enjoyed the Colosseum too. The pantheon was cool too.

@StNixFarms 5 ай бұрын

Yes, I did not want to bore with all the video so I left some things out. Really enjoying the reverse auction idea and following intently.

@1958johndeere620 5 ай бұрын

These things are a crap box. We have one and the head gaskets blew before 100 hrs. By 200 hours 2 e brake cables have broken, 2 shift cables have replaced due to they freeze all winter. Clutch is junk, won't disengage unless you shut it off. It never gets worked hard. Mostly carry tool box to projects, get the mail ect. A real disappointment. John Deere should be embarrassed.

@StNixFarms 5 ай бұрын

Yes, Deere has already put two clutches in mine. Would not buy this model if I knew what I know now.

@JS-th2ev 5 ай бұрын

Thanks for posting the video, how did they anchor the generator to the slab?

@StNixFarms 5 ай бұрын

Setting loose. The weight of the generator holds it firmly in place. Have seen absolutely no movement. That thing is heavy.

@JS-th2ev 5 ай бұрын

@@StNixFarms thanks for responding I went ahead and just used lag shields to anchor it down, I was thinking the same thing about the weight being enough to hold it down. My electrician told me people will steal these things, so maybe anchoring it down will cause them one more step lol thanks again!

@StNixFarms 4 ай бұрын

Yes I am planning to build a small privacy fence around mine just for that reason.

@JS-th2ev 4 ай бұрын

@@StNixFarms man some people suck! Well thanks again for the video.

@rickrhodes4788 5 ай бұрын

Nice review

@StNixFarms 5 ай бұрын

It was a great tractor. Just needed one larger. Now have the 4052R. Thanks for watching.

@jddriver9565 6 ай бұрын

Do you still have the 3025D?How many hours are on it?thanks!

@StNixFarms 5 ай бұрын

I had a 3035D, and no I no longer have it as I traded it in on my 4052R. Thanks for watching.

@wilburfinnigan2142 6 ай бұрын

Damn I wonder if the old man ever got any lumber cut ??? He does not seem to understand if you put the small end to start the cut it makes it easier and faster to determine what size cant you get !!!

@StNixFarms 5 ай бұрын

Old man? ...and not always the case. Many millers will say which end doesn't really matter and I don't pay any attention to that as I just go with how I have picked up the log.

@twobrotherskayaking4736 6 ай бұрын

I noticed the 'pivot' while I was putting the front snow chains on my 2018 JD2025r so, no stability help there!! Thursday, I ordered 2" rear wheel spacers from Bro-Tek (New Brunswick Canada I believe) after calling them and discussing their products quality and durability, etc. Looks like they will be here (upstate NY) on Wednesday. So just a week for shipping as they are in stock. Want a little more clearance for my diamond/cleated rear chains. Should help some with stability but I have a 3-point rock box which does a lot for stability when moving with weight on loader or on forks. Will be looking into 'beet juice' soon too! Bert advice for hills......straight up or down, forward or reverse but......NEVER SIDEWAYS!! BE SAFE!

@StNixFarms 5 ай бұрын

Thanks so much for your comment and watching. I wish we had a dealer for Rimguard near my location. The nearest one is about 120 miles away. My dealer did put in my rear tires what they use for all the farmers in my area.

@bobbieolsen7264 6 ай бұрын

Thanks, nice mill set up, as a much younger version of myself, I ran a mill and then used the product for mortise and tenon, post and beam work, the objective was to provide a blemish less product the customer. Cant-hooks and log rollers bite in and scar, if you need to produce a “finished” product, you’ll need to protect your corners from strap bite but your on to something.

@StNixFarms 5 ай бұрын

I do no sawing for the public. All my lumber is for personal use. Thanks for watching.

@JTBags420 7 ай бұрын

How many hours did this take you? Dealer wants $700 to replace mine and 1 other broken part. Seems like a lot of work

@StNixFarms 5 ай бұрын

It took me a couple of days, all day long with all the taking off and putting back on. Doable but not a real easy task. Thanks for watching.

@user-eo2iy8fo7p 7 ай бұрын

Adding width to the front won’t do anything at all to affect stability. The front is on a pivot. I may flip the rims on mine so I can get more clearance for chains. Add width and rim guard ballast to the rear if you’re looking for lateral stability.

@twobrotherskayaking4736 6 ай бұрын

Very true. I noticed the 'pivot' while I was putting the front snow chains on my 2018 JD2025r. Thursday, I ordered 2" rear wheel spacers from Bro-Tek (New Brunswick Canada I believe) after calling them and discussing their products quality and durability, etc. Looks like they will be here (upstate NY) on Wednesday. So just a week for shipping as they are in stock. Want a little more clearance for my diamond/cleated rear chains. Should help some with stability but I have a 3-point rock box which does a lot for stability when with weight on loader or on forks. Will be looking into 'beet juice' soon too!

@StNixFarms 5 ай бұрын

I no longer have this tractor as I now have my 4052R. I have ballast in rear tires and 5.5 inch John Deere spacers. I will add that a 40 year tractor mechanic who has the same tractor as that one recommended that I reverse them.

@StNixFarms 7 ай бұрын

Thanks for watching and may you have a healthy and prosperous 2024.

@cecilchristopher5092 7 ай бұрын

Larry where are you located?

@StNixFarms 5 ай бұрын

North Alabama. Thanks for watching.

@casilyn04 7 ай бұрын

Fantastic video! I was able to replace my own cable thanks to this video. Greatly appreciate it!!!

@StNixFarms 5 ай бұрын

Fantastic! Thanks for watching.

@majorpixchannel7146 7 ай бұрын

Merry Christmas ⛄ happy New Year

@majorpixchannel7146 7 ай бұрын

I love the content sir! We do lots of milling on our channel both bandsaw and chainsaw! I will be watching in the future! Il also give my subscribers your channel information! Be well and be safe 🙏

@StNixFarms 5 ай бұрын

Thank you so much and thanks for watching.

@jordanlinda53 7 ай бұрын

Happy New Year!

@StNixFarms 7 ай бұрын

Same to you!

Ең жақсы KZfaq

Пікірлер