love the vids hope you can get a one man side loader truck soon! keep pumping out the videos
@VileMisanthropyКүн бұрын
Holy fuck, why is this video 20 mins long. Am i going to get anything out of this? Just keepnrepeating your self.
@jimdandy73233 күн бұрын
Hey...check out Roland Finger's Iron Duke rebuild...the cross hatch was still visible in the cylinders...the Duke is a Pontiac engine...thanks for the video...
@chrisrichardson89086 күн бұрын
Pig farm .I would think they would take the meat
@CopperCreekCuts6 күн бұрын
Congrats on 500!
@ALEXISANTONIOAGUILARBASTIDAS6 күн бұрын
Como va los compensadores de colorado 2008 5cilindros
@antoinemathis97567 күн бұрын
You need god
@townsendliving97507 күн бұрын
@@antoinemathis9756send me his number
@TaylorEllis-d1d12 күн бұрын
I considering starting a trash service would love to ask you some questions if you don’t mind
@jonathancashiola607426 күн бұрын
Fuel pressure on mine is 75.1 but I believe it’s. Supposed to be around 90 If yours has. Fuel control module chunk it. And ground. The 2 wires on left side of plug together and the two on the right side
@PraiseMore28 күн бұрын
Do you need to talk with the city to allow u to pick cans? Hows thay work?
@townsendliving975028 күн бұрын
@@PraiseMore we are not allowed to touch city limits at all. We are only allowed to do out in the county
@willy8d89829 күн бұрын
One bolt per corner on a lumber rack is enough for the rack but what about a load & emergency stop 😬
@townsendliving975029 күн бұрын
@@willy8d898 pretty sure majority of trucks are mounted this way. Look up the shear stress on 4 3/8s bolts. It's well over 100k pounds
@grantburgstahler944Ай бұрын
Do you have a phone number?
@samkratzer94Ай бұрын
Love how you show absolutely nothing.😫 like seeing the parts are nice but can you show me how you got the mount actually out of there?
@townsendliving9750Ай бұрын
@@samkratzer94 yea I don't like filming while I'm working, that just adds another level of complexity to my life I don't wanna deal with, usually just film on my down time while I'm waiting on parts. Plenty of people who have a bunch of time to film them selves mechanicing and edit videos all day long
@samkratzer94Ай бұрын
@townsendliving9750 I apologize for my comment as I was in my shop and frustrated, which is no excuse, I appreciate the time you took to make this as even this is very helpful, every other video I run into is the 2.4l haha.
@casseysickles2186Ай бұрын
A 20 yard truck your probably getting more like 300 maybe 400 per load
@anthonyfisher4874Ай бұрын
Sound like my truck have similar issues, I put a lot on money and it still falls on its face. I haven’t change coils! Did you find the issue?
@townsendliving9750Ай бұрын
@@anthonyfisher4874 it was a combination of things, coils and fuel pump.
@anthonyfisher4874Ай бұрын
@@townsendliving9750 Got ya, what brand fuel pump you went with and did you have to change your converter?
@anthonyfisher4874Ай бұрын
@@townsendliving9750 I put on two delphi fuel pumps in one year and wondering if that could still be part of the problem.
@townsendliving9750Ай бұрын
@@anthonyfisher4874 id install a permanent fuel pressure gauge. If it ever drops PSI then you'll know, if not you'll know to look somewhere else
@shanerogers488Ай бұрын
Just bought the same sized tractor, but passed on the backhoe. Was cheaper to just buy one of those Chinese mini-excavators. Good luck!
@kwplumberАй бұрын
Have anything service bodies for a 2010 f150?
@patrickcurran2314Ай бұрын
Where did you order your cans from?
@townsendliving9750Ай бұрын
Wastequip
@hquiroz113064Ай бұрын
it has no pressure like a car does. but ive seen these repairs last a couple years.
@saucyscrewdriver4008Ай бұрын
I just did it on an 09 v6 by only pulling the bottle, the idler pulley, and the 2 nuts on the thermostat housing. Just leaving the belt tensioner held back leaving the belt, loose, in place.
@samkratzer94Ай бұрын
Could you explain this to me? Sorry I have an 08 v6 and if I don't need to pull the alternator I'd like to not to haha
@samkratzer94Ай бұрын
I've tried everything to reach that upper bolt tucked in there and can't get it to turn because anything that reaches like my flex extension don't have enough torque
@drewmurray25832 ай бұрын
I have those 2 grounds hooked together and Im having random misfires at mid to high rpm!!!!!
@townsendliving97502 ай бұрын
Highly possible that's it, they need to be separated.
@davidlindfield2 ай бұрын
That block is toast. It wont last.
@townsendliving97502 ай бұрын
Second season on the lake, my customer has used it a few times since then. Good enough for for what it is. Either throw the boat away a year ago, or get another year or two out of it. I have replaced engines in boats and the customers let the brand new engines crack the first year.
@Aceman5972 ай бұрын
I have bottom popped out also. Havnt used yet. Better work or else.
@mr2doubles2 ай бұрын
It would not be wise to fill the truck up and dump it out once a week. It’s best to dump it out at the end of the route every day because there’s a big risk for fires. You don’t wanna burn down your trash truck or your whole facility. Don’t crush big batteries. And keep trash off your trucks battery box.
@mr2doubles2 ай бұрын
Trash trucks aren’t geared for climbing hills at all. I think they put weak motors in there so the drivers don’t go nuts ripping and romping while overweight. Even brand new trash trucks go 25 mph up interstate hills where I live in North Carolina.
@townsendliving97502 ай бұрын
Yea I noticed even waste management struggles at the end of the day
@mr2doubles2 ай бұрын
There’s something called backpacking that’s where you can get more cans on your truck. What you do is as you’re working, you push the head towards the rear of the truck and it smashes the trash tighter. You’ll get more trash in the truck then if you let the head naturally move itself towards the cab Without smashing the head back towards the trash. It’s completely full and you have your max weight whenever you push that head and backpack it all day long and your packer will no longer compact more trash you’ll dump. Can the packer sweep it and start sliding up whenever you open it it’ll all vomit back out into the hopper, and you’ll have no more room to put any more trash in the hopper.
@mr2doubles2 ай бұрын
You can increase or decrease the amount of hydraulic pressure. Then you’ll be able to smash more trash bidding more cans. If you go over the weight and you can get a overweight ticket and have to pay for however much you’re over. The state troopers are the ones that you have to watch out for they’re the ones that are going to pull out the scales and weigh you. Regular cops don’t have scales in their car. If you get into a wreck and somebody gets hurt or killed while you’re overweight then that’s not gonna be good for anybody. My truck at my job is a front loader. It’s rated for 54,000 pounds and I’ve gone over to scales at the dump Weighing 71,000 pounds. Also, you have a certain amount of weight on your bet your truck is registered for you can find it on your registration. I’ve had a state trooper check the plate on the truck which says my truck can weigh 66,000 pounds they didn’t check the registration that says that it’s only registered for 54,000 pounds.
@RYDENROAM722 ай бұрын
Wow I feel sorry for you. All that mess is just a mechanics nightmare.
@townsendliving97502 ай бұрын
It's gone now, but yea that project was a joke. I got suckered into it.
@RYDENROAM722 ай бұрын
I got mine at Orielys auto parts.
@RYDENROAM722 ай бұрын
I have the exact model, 85 Isuzu pup. I have a stock motor 1.9.
@RyaMarshall2 ай бұрын
what happened?
@townsendliving97502 ай бұрын
Went broke, too many projects at once. They will be back in the channel in about a month or two though. Actually just started back up on the mustang this weekend. I'll have an update here soon
@RyaMarshall2 ай бұрын
Oh fast response! 😂 Oh yes money... I understand. Looking forward to the updates. In the beginnings of mine I have a 64.5 w/170ci try to come up with a plan.
@redneckdrennan7452 ай бұрын
do you fuck comments. you drive it and stay legal and SAFE!!!! mechanic 43 years
@Cameronherdman692 ай бұрын
We pack till it’s full then dump 🤣 Thursday I had 18.76 tons 83.200 was loaded weight!! Resi frontload tho our rearloads only pack like 16 tons …
@townsendliving97502 ай бұрын
How many yards are these trucks?
@frankiepeppers32852 ай бұрын
its all about tonnage my friend ,
@jamesmoore20072 ай бұрын
You were told that... 4 to 500 per day.
@townsendliving97502 ай бұрын
Not per load? I was wondering if I misunderstood it. But I thought it was 4 to 500 per load. But I may have for confused cause I looked into a lot of trash trucks that do over 500 per load
@cataplexy2472 ай бұрын
I think the lake champlain guy was getting 125 on his i think 9 yrd. truck.
@townsendliving97502 ай бұрын
The f550 he had? I can't believe he sold it. If you can fill it up everyday it has to be making money. I think he went back to throwing them in a truck
@cataplexy2472 ай бұрын
your killing it! and your dump is half the price of mine! I am competing with 7 companies but slow and steady she goes! always looking forward to updates
@zacharylane56662 ай бұрын
I have 5 20 yd trucks and the body will pack out around 8 to 9 tons and 400 to 450 96 gallon cans.
@townsendliving97502 ай бұрын
So I can technically pack 400 cans, but the suspension won't be happy and it's technically illegal?
@matthewseverance11052 ай бұрын
Pretty Much. For a 500 toter route, you’re choosing between staying legal but making multiple trips to the dump which means more labor hours and more fuel consumed OR to pack it as you go and take the risk of an overweight ticket. The tag axle will add the rated capacity to the GVWR tho so that tag will be your best friend!
@dcwshoreline54162 ай бұрын
absolutely love the mindset!
@townsendliving97502 ай бұрын
We are a year in, check out the new updates on the channel if you have r seen them yet
@dcwshoreline54162 ай бұрын
this is gold! inspiring to see you do so many businesses at once!
@townsendliving97502 ай бұрын
I'm not sure my generation gets "the jerk" references
@dcwshoreline54162 ай бұрын
subscribed from Canada!
@dcwshoreline54162 ай бұрын
Love the story of starting the trash business. Reminds me of the BFI Tom Fatjo Story. How big are your ambitions for this business?
@mechanicalworld34252 ай бұрын
do you have a link to the cad files you used for the adapters? I've got a ryobi lawn mower and as you said, the 40v batteries are terrible! I have tons of M18 batteries and was thinking of doing this, but if you already have the CAD files it would save me some time. Thanks!
@townsendliving97502 ай бұрын
I do not. Check eBay for the adapters. They are fairly common
@Spiff1783 ай бұрын
💪🏿
@ZR1Terror3 ай бұрын
I bought a truck over the weekend in Corpus Christi, Tx and they did the same thing as you did to the service bed. Maybe you did it!!
@user-tb4yx1pf4s3 ай бұрын
Gas over hydro skip the electric, get standard rail spacing. 36”
@townsendliving97503 ай бұрын
After a year of owning skip the trailer, buy a rolloff truck. But everything is easier said then done. This trailer was 30k. A rolloff truck is 100k
@_-Knight3 ай бұрын
Just finished watching all your residential trash videos. Amazing progress. Hope the business is going well
@townsendliving97503 ай бұрын
It is going okay. It's a hard business for sure, keep watching. If you see me in a good mood it's probably going okay
@robertgraham16263 ай бұрын
Good job, I've done the same thing with grounds, on my 02 and in my 98 6.5 turbo in dually one ton
@robertgraham16263 ай бұрын
Holy crap!! BS shotgun diagnostic"
@cataplexy2473 ай бұрын
your bringing back nightmares from when i was trucking. grease, brakes, tires, oh my!