Where did you get the AN banjo bolt fitting for the injection pump overflow? I've been looking and haven't been able to source one yet!
@ianmcculloch876313 күн бұрын
Aren’t there screws that would need to go through the area you upholstered to re-attach the panel to the door? Mine does but it may have been a repair job prior.
@Countrykid0727 күн бұрын
I love this rig
@jacklacy649229 күн бұрын
That’s sick, I’ve seen that guy rolling around town
@Cberry0036Ай бұрын
You find out what the throttle cable bracket is made by thanks
@erinthomas8746Ай бұрын
I LOVE THIS SOUND
@ChaseRubbins2 ай бұрын
Mk
@derrickthompson28942 ай бұрын
I see lots of money here 🔥
@Scott_Buchanan2 ай бұрын
Good info!
@rocklanddale86462 ай бұрын
INSTEAD OF JB WELD A TRUE SILVER SOLDER LIKE FOR HVAC SYSTEMS
@krypttoenight99712 ай бұрын
I like that fabric, cool ideal. Do you have a link to the material? Thanks
@tacosturbosandtoothpicks45123 ай бұрын
Welds over everything 🙌 love the build
@motofish3123 ай бұрын
YOU AND HOW MANY MILLION OTHERS???? NOT ANOTHER USELESS 12 VALVE VIDEO!!!!!???!!?!?!?... KILL ME NOW!!!!...
@littleredridinghood56223 ай бұрын
That's not even close to 700hp until you give sizes of turbos , most of that stuff is just fancy ad-ons ..
@Pb_24v3 ай бұрын
I shouldn’t even be taking time out of day to respond to you but it had 475/464 compound set up on it. Thanks for your input
@AustinHill-bx1uw3 ай бұрын
Where did you get the throttle cable bracket?
@lucaspita9583 ай бұрын
Still got that roller? Bought a 3rd 09 and found that the frame was cracked behind the thank. Looking for a roller
@Pb_24v3 ай бұрын
Sold it. Sorry
@deanklopp32423 ай бұрын
what axles are you running if you dont mind me asking
@Pb_24v3 ай бұрын
It’s on a 3rd gen chassis so factory AAM axles
@deanklopp32423 ай бұрын
i thought so, kind of doing the same thing with my 79. Thanks! @@Pb_24v
@josephjporcellijr45083 ай бұрын
I’m working on mine too I’m going to lower mine down too
@SSSpmarg3 ай бұрын
The Humvee will start tomorrow I will send you a video
@Pb_24v3 ай бұрын
Did you get it going?
@bobbyolson46163 ай бұрын
Could you take a picture of the injection pump build sheet? Thanks!
@ngelemental22743 ай бұрын
is that a 12 valve that you swapped to common rail? or is it a common rail engine u put in the truck
@burnemtoearnem3 ай бұрын
if i remember right its a full first gen body on a 3rd gen chassis
@CaleBane3 ай бұрын
You should make a video about the coolant leak 👍 I have a friend with the same problem, we’re out of ideas
@Pb_24v3 ай бұрын
It ended up just being slightly loose. I got the slightest tweak out of it and it’s been fine
@hankclingingsmith87073 ай бұрын
Why would you put the fuel tank in bed. Seems really dumb
@Pb_24v3 ай бұрын
You’re right. I should fix that for you.
@brandonpropterhoc3 ай бұрын
what year is your truck> and is it a 3/4 ton 1/2 ton? I am wanting to swap a diesel into my 89 Dodge 150 Ramcharger and would like to know what all mods/cuts/welds etc i would need to do.
@Pb_24v3 ай бұрын
It’s a 1990 1/2 ton body on a 2003 dodge 2500 chassis.
Welds are definitely the move! The truck looks so good.
@Pb_24v4 ай бұрын
Thank you!
@fabianflax74824 ай бұрын
That looks really good!
@sammyvanede24474 ай бұрын
love the truck man looks good
@jacklacy64924 ай бұрын
Dude this looks great! I’m ready to see it run!
@IT-FITZ-134 ай бұрын
I love these trucks and I love this song
@todaguilar20044 ай бұрын
*Promosm* 💕
@redfuel6bt5 ай бұрын
Do you have any videos on swapping the 1st gen body on your 2nt gen frame?
@joelmitchell84485 ай бұрын
Epic
@dawson_c19525 ай бұрын
Badass
@richardsix32955 ай бұрын
where did you get the air intake or do you have a part number thanks. the build looks awesome.
@Pb_24v5 ай бұрын
If you’re talking about the intake horn, it was just an Amazon special
@Pb_24v3 ай бұрын
The intake is from wherli
@kr4dh4x0r5 ай бұрын
But have you got quite a bit of requests to not film vertical videos?
@Pb_24v5 ай бұрын
Watch all my videos after this one bud
@kr4dh4x0r5 ай бұрын
@@Pb_24v I'm guessing this means that you did get some comments about it and started filming horizontally.
@decentgarage5 ай бұрын
Super helpful video dude! This is on my list for sure
@Pb_24v5 ай бұрын
Thank you! Glad it was useful.
@davidzigrang79245 ай бұрын
The door panel look nice I did my panels and headliner in dark tan Cordura my seat covers are being made by Marathon in Bozeman Montana they are dark tan and coffee thanks David
@decentgarage5 ай бұрын
That's looks awesome! I wish someone made a similar monitor for the 12 valve.
@Pb_24v5 ай бұрын
Thanks! And that would be really nice. You could always wire up a Holley system but obviously that’s a lot more involved
@infernoking75045 ай бұрын
210 hp is enough for me
@ALAKRANCONYAKI5 ай бұрын
Can you do a walk around of the truck? PLEASE!! 🔥🔥🔥🔥🔥🔥
@korn1116855 ай бұрын
Interested in doing this on a 2nd gen.
@jacklacy64925 ай бұрын
That’s super clean
@JRasS146 ай бұрын
Catch can is cool, and the drain I thought about but is don’t you want something vented?
@Pb_24v6 ай бұрын
The catch can itself is vented by leaving one of the caps open. On my new engine, I have a 180 degree fitting to vent it straight to the ground.
@KDrapsag6 ай бұрын
Heck yeah man awesome job! Excellent detail!
@user-qc9zm3rp2g6 ай бұрын
Where did you get your belt to run without ac compressor?
@Pb_24v5 ай бұрын
Parts store
@user-qc9zm3rp2g6 ай бұрын
Where did you get your belt to run without ac compressor?
@user-qc9zm3rp2g6 ай бұрын
Where did you get your belt to run without ac compressor?
@casualactivities12295 ай бұрын
You just re route the belt if your not running a compressor it Tells you as soon as you open your hood there’s a diagram