Great video🎉

Wow - this actually worked for me! Thanks.

It worked great for me. Thanks for the video.

Alright Tim Wong thank you!

Just did this fix on my 2019 3.6 and the rattle is gone. Thank you for the tutorial!

Wow! Really great video Tim! Super efficient. Thank you!

If you go to buy dielectric grease, look at the label. Mine said 100% petroleum jelly, cost $20. Went next door to CVS, jar of Vaseline 10 times the size…. $2, ingredients…. 100% petroleum jelly.

Magnífico

I used your video to change my front pads 4 years ago. Great work! Now time to do the rear pads. Of course the price has gone up! There is a product number with an A at the end. Will that work? ACT1086A

Do these cars have transfer case?

So at 2:24, "So, we're under the cowl now...". Man I wish you'd have shown that access panel better in relation to the rest of the under car. For those of you who may wonder exactly where it's at... it's right under the front of the car practically in line with the front of the hood. You don't really have to slide under the car to see it, it's visible just by looking under the front of the car. Of course to actually get the panel off and loosen the bolt you have to be under the car. My bolt wouldn't budge with all my weight pulling it like doing a chin-up instead dragged me up, over 200 pounds. I smacked it with a small sledge hammer, it worked to loosen it.

If I torqued one of the spark plugs to 16 ft lbs by mistake instead of 13, does anyone think I should remove it and re-torque to 13 ft lbs? Or is the washer already crushed and useless? Or just leave it? Thanks.

Worked like a charm

Nice job man. Real clean.

I put my car on ramps and stands

Why use the tubing instead of the telescopic magnet to put the plugs back in?

Thanks Tim, neat perspective! I can't believe how high you can keep your HR!

Nice one!

can't wait for our next race. that was too much fun out there

Great footage from another racer in the same race here: kzfaq.info/get/bejne/nL1mqJRqs63Rnnk.htmlsi=MQ6bCNJs7ciKNSJX

This fixed my 2013 Civic EXL annoying sound, Thank you very much!

Thanks soo much

Take my like

I wish mine were laid out this on my Infiniti QX4.

Thanks for the video. Forget using a power tool for this - it's just one screw and you don't want to cross-thread the hole. Also, $26.90 (as of 5/2024) for a screw and small spring is criminal. You don't even need a new screw. You may be able to get away with stretching the existing spring or finding a suitable spring elsewhere for cents. A longer screw should work too.

This is a perfect video. Wish all content creators would cut the jibber jabber.

Hi guys, i have problem wit my Otb 2019. Some clunking/rattling from front left wheel, but only few minutes/km after start. When I turn to right - noise, turn left - noise. But if I doing same things after few km, it is silent. Some ideas? Thanks

I replaced it but the problem is still existing!

Desde hacia rato que empezó a tirar aceite cuando estaba llenando el diferencial !

Thanks u

Would you advice for a brake fluid change vs a fluid flush when copper leaves are beyond 300? I got a 2011 CRV

nice production. I raced the sea otter road race and did a practice loop on the track Thursday, so I enjoyed getting to see what the circuit race looked like during the race in case I do it next year!

Hah, surely some apex'es missed there 😅 But my favourite combo - been loving both cycling and automotive racing since 1978 and practiced both. Even at a 24-hour bike endurance event at my local track of which 10 years ago was very popular. First time I watch a bike race at Laguna Seca, seems like real fun! Greets from Denmark

This was your first race? Excellent. It looked like a group of riders got away on that first hill. I think you have the fitness and the drafting know how to be in the top 15 finishers next time if you stay at the front of the group for that first hill. I think the additional effort to be there at the start will really pay off. Hope you do it again some time. Nice job!!!

Thank you Tim!!!, this worked like a charm.. the issue is resolved now and able to call people without irritating them 😊

Thanks for posting Tim!! got some great shots this weekend. Can't wait for some more racing coming up!!!

Thank you! My daughter was volunteering at your event today! She's going yo Monterey Bay, Dean's List, for an Environmental degree. Me, always lived racing on one of.the best courses in 🇺🇸 enjoy the.corkscrew!

Excellent video, thanks for posting

When torquing down the spark plugs did you use a 1/4 to 3/8 adapter?

YOU SAVED ME $2,000!! The dealership said I couldn't just replace the microphone. They said I had to replace the whole system. I just replaced the mic myself. THANK YOU!

I just tried this and it worked great. I had to pause video while you were taking last cover off as it was done very quickly. Thank you for posting this.

2wd doesn't have rear differential

Excelente 😂

So helpful thank you

Good job budd

How much does the transmission hold and how much can be drained?

So, no anti-seize on NGK, What about Denso?

The last time I did a 2015 CRV brake bleed, I used the 2 person method. NEVER AGAIN. Too slow and cumbersome. I just did the 1-person method and it was a peice of cake. Pushed 2 QUARTS of Dot 3 thru my just-purchased 2013 CRV brake system until it was clear because I don't think it was ever done. 3 tips: 1)Put some used fluid you removed from the master cylinder into the bottle and submerge the end of the tube into it. 2)Open the valves NOT MORE than a 1/4 turn and pump the brake pedal gently and stop before the pedal bottoms out. (The less you open the valve, the longer it will take to pump the brake pedal.) 3)When done, the brake should feel overly firm before starting the car, but after starting, the pedal will sink to the floor. Gently pump up the pedal a few times before putting into gear.

Thank youuuuuu❤❤❤ Finally I fix the problem. It was driving everyone crazy.

Como se llama esa parte o resorte