If budget is priority, the the T350 saves you $200 which could be put somewhere else. IMO....I'd put the Powerglide in it. Look forward to more. Be safe and stay well.
No sense doubling up your updates as you won't know which update did what. Have seen a lot of guys do that trying to save time. Very, very frustrating when the results aren't what's expected and you just start changing stuff whilly-nilly. Trying to get the desired results is almost impossible. The mounting panel looks really good. Certainly does the job. Look forward to what's next. Be safe and stay well.
@andyt55598 күн бұрын
Forget the annoying repetitive music!
@matthewshort79048 күн бұрын
I’m thinking of getting a Stratocaster body sprayed with this stuff. What do you think? I’ll be having a professional do it for me.
@SketchysGarage8 күн бұрын
That would be really cool!
@yattaran148410 күн бұрын
Thanks for the update. Hoping all the upgrade will work great !. Any video of JJ's race you've been to ?.
@SketchysGarage10 күн бұрын
I haven't gone to one yet this year, there is some coming up I plan on going to.😎
@IronheadGarage11 күн бұрын
Look forward to seeing her on the track again. Have a good one Scotty 👍🏻🇺🇲
@RedEyedPatriot11 күн бұрын
😎
@DG3859411 күн бұрын
Could do without the loud music in the background. Wanna hear the motor not screaming guitars
@SketchysGarage10 күн бұрын
Sure! 😎
@kathydunlap534513 күн бұрын
Don't know enough to advise, but good luck. ❤❤❤
@TheseBygones13 күн бұрын
Do you have a link to that epoxy primer? I need it, and all the websites I find are scam websites
@briankinnear746116 күн бұрын
If you're gonna do it. You want reliable and consistent. Look forward to see what happens. Be safe and stay well.
@SketchysGarage16 күн бұрын
That's the key to getting one faster is having some consistency to build off of.
@briankinnear746113 күн бұрын
@@SketchysGarage Agree 1000%. Eliminate known variables to make development and improvements easier
@yattaran148424 күн бұрын
I believe fixing the A-arm is already in the list so I say ignition comes first. Can't wait you to rebuild the motor !.
@HorsepowerHeadquarters45425 күн бұрын
Why you like terds???? Be honest now...
@SketchysGarage25 күн бұрын
What the chevelle or the motors? 😂😂😂😎
@HorsepowerHeadquarters45425 күн бұрын
@@SketchysGarage whatever your considering the terd I'm curious?
@SketchysGarage25 күн бұрын
@@HorsepowerHeadquarters454 My wife came up with the name for the car. It was full of rat and raccoon turds plus it's brown.😂😂
@briankinnear746125 күн бұрын
If you're doing a-arms. finish the suspension. Power and performance ar\e good, but you gotta be safe driving the car. Look forward to more. Be safe and stay well.
@SketchysGarage25 күн бұрын
That's for sure! Safety number one priority.
@HorsepowerHeadquarters45425 күн бұрын
@@SketchysGarage you wouldn't want to ride in my truck then. Lol
@kathydunlap534527 күн бұрын
😎.
@G2K28 күн бұрын
Sweet Ride‼️Love it Bro🤘 next time slap some go pros on her 👊
@SketchysGarage27 күн бұрын
For sure! You been doing ok?
@yattaran1484Ай бұрын
The dog seems to love hearing sound of the motor like we do !. Happy to see her back in life again !. 😊
@yattaran1484Ай бұрын
Great to see her back in life again !. Keep on going !. 😊👍
@nopro5433Ай бұрын
Makes it all worth it Brother! Rock On 👨🏻🏭 Father / Son Working Together and Kicking Asz is PRICELESS !
@SketchysGarageАй бұрын
Yes sir, team work makes the dream work.
@briankinnear7461Ай бұрын
A very respectable first few runs. A few more tweaks and you should be able to stay in it all the way. Look forward to seeing more of Turd Mugger. Be safe and stay well.
@SketchysGarageАй бұрын
Thanks, we appreciate you coming along with our journey!
@Hogenson77Ай бұрын
This is exactly what colors im going with on my chevelle. Did you find the gold paint code? How lighter would a champagne look vs this gold i wonder?
@SketchysGarageАй бұрын
Sorry, I forgot to look. I'll check in the morning and see if I can find it. The champagne would look nice too.
@briankinnear7461Ай бұрын
Tranny leak. Engine sounds good. Hope it's just a simple seal. Look forward to more. Be safe and stay well.
@IronheadGarageАй бұрын
Great Old video. Is the old Chevelle still around? I remember it pulling the front tire off the ground 😁 Have a good one Scotty 👍🏻
@SketchysGarageАй бұрын
Yes sir, we are fixing to start the next phase on car. How have you been?
@IronheadGarageАй бұрын
@@SketchysGarage been doing good hope the same for you. looking forward to seeing the next phase. Have a great weekend 👍🏻
@briankinnear7461Ай бұрын
Definitely on a budget so far. Some of those prices are crazy cheap. Look forward to more. Be safe and stay well.
@EEZYEEEEАй бұрын
Do you recommend a degreaser after sanding rust to bare metal before epoxy primer? If so, any particular degreaser you recommend? Thanks!
@SketchysGarageАй бұрын
I usually just use alcohol for pre and post wipe.
@EEZYEEEEАй бұрын
@@SketchysGarage Thank you! Lastly, if I have spot surface rusting all over the vehicle, should I sand the entire vehicle (even the non-rusted sections) down to bare metal or just do the rusted areas only? The car is a 1971 and has one layer of original paint on it.
@SketchysGarageАй бұрын
I would go ahead and sand the whole vehicle down to bare metal then just to be safe.
@kathydunlap5345Ай бұрын
Good luck. You got some work on your hands, but I'm sure the end product will be worth it. ❤❤❤❤❤
@SketchysGarageАй бұрын
Thanks! I hope it comes together soon. 😎
@MrJayArtАй бұрын
Red flag after red flag with this car.
@MrJayArtАй бұрын
Foreshadowing.
@briankinnear7461Ай бұрын
Lovin' the big block. Can't beat big cubes for cheap power. A screamin' SBC would have been cool but a lot more money for sure. Look forward to more. Be safe and stay well.
@SketchysGarageАй бұрын
Thanks! It ends up with a few different power plants before it's all said and done.😭😂
@yattaran1484Ай бұрын
"Rust is lighter than carbon fiber !" Looking forward to see her completion !. 😄👍
@bobdown9414Ай бұрын
Great video. But lose the music. Not enough detail youall doing at the front.
@56raamanАй бұрын
hope it runs better than it looks
@SketchysGarageАй бұрын
For sure, she's definitely not a prom queen. 😂😂😂
@jasongaskins6421Ай бұрын
When hay becomes a soft barrier at a track, you shouldn't go for it
@briankinnear7461Ай бұрын
You are so right. A diamond in the rough is usually something you need to really look for, and/or take a chance on. The tear-down is going well. Look forward to more. Be safe and stay well.
@SketchysGarageАй бұрын
Thanks, we appreciate it!
@r.guardia9107Ай бұрын
Great video. 👍 What kind of base coat is this? I couldn’t make out the brand when you mentioned it. Thanks
@SketchysGarageАй бұрын
It is Diamont Basecoat and Glasurit 460 clear. The color is very gorgeous it has a blue cast to it in off light. Thanks for watching!
@yattaran1484Ай бұрын
Hello Sketchy !, it seems another cool project going on there. Just wondering what happened to your Gremlin project ?.
@SketchysGarageАй бұрын
We have been racing it some. We should have some videos of it coming soon. Thanks for watching!
@rodcleve2 ай бұрын
This is what it looks like if you don't catch the aftermarket quarter panel error and just lay them on. kzfaq.info/get/bejne/npyIgLOix9-ripc.html
@SketchysGarage2 ай бұрын
It would be enough to make you sick for sure.
@timothycastillejo80382 ай бұрын
Bird brothers lost the handicapped race but won the fight…
@cbnx827032 ай бұрын
This isn’t the wreck that killed Nate…!
@bracketracer20002 ай бұрын
hmmm glad it was clickbait this time lol
@kathydunlap53452 ай бұрын
Good luck.❤❤❤👍👍👍
@briankinnear74612 ай бұрын
For $6900 budget build I'd say a screamin' small block with a built Powerglide behind it. Look forward to more. Be safe and stay well.
@user-hl6nz3xw8d2 ай бұрын
Small with 4
@ronneoutland57762 ай бұрын
Big boy
@RedEyedPatriot2 ай бұрын
Sketchy whats good Bro good to see you posting again.. If you're gonna race it. Might as well go big or go home. Id go Big Block with a Glide or th400. One of the Battleaxe Trans, perfect converter, 9 inch rear. Look forward to watching the progress. 😎
@SketchysGarage2 ай бұрын
That sounds like a solid setup!
@petehenderson2 ай бұрын
And a year later you have small tires on it. Well then
@SketchysGarage2 ай бұрын
Bad thing is he waited so long he's way behind the curve. At least he would be in my area.
@briankinnear74612 ай бұрын
Interesting build. Look forward to hearing the options. Should be able to make some decent $$s off those old-school parts. Be safe and stay well.
@IronheadGarage2 ай бұрын
Great throw back Thursday. Haven't seen much what's been going on in your shop lately. Have a great weekend brother 👍🏻
@SketchysGarage2 ай бұрын
I've had alot going on. It's good hearing from you.