I downloaded the beta version and installed it with the drive needed. It still does not show up. The USB is plugged in. When I do plug it in all I see SEA-LASER under other devices. I followed the instructions to install manually too. I don't get any of the USBMLCV* drives at all.
@luc10513 күн бұрын
hello, what about settings ?
@luc10513 күн бұрын
material ? settings ? please...
@luc10513 күн бұрын
what about settings ??
@luc10514 күн бұрын
... same problem for me, can't find BSL laser option
@printinaddiction895614 күн бұрын
Could you post the settings?
@scanchrisyeg15 күн бұрын
Settings?
@scanchrisyeg18 күн бұрын
No matter what do, i can't connect my phone to the G2 20w
@bekir1561Ай бұрын
What is the G-Laser password?
@MrAtoulminАй бұрын
Great device, but please stop using AI voices. It sounds terrible
@mslee889Ай бұрын
I can’t connect the LB 1.7 to my Mac. I can’t find BSL laser option. Also can’t detect the machine
@tajriojas87422 ай бұрын
How do you get the G2 working with Lightburn? The laser isn't detected when I try.
@gweikecloud41782 ай бұрын
hey taj, pls reach out to our tech support, will ehlp out, (get the right driver and the latest version of LB
@alexgehringer22802 ай бұрын
What is that material called?
@gweikecloud41782 ай бұрын
Scratch paper/ art Scratch paper
@NickCent2 ай бұрын
Give us the settings for colors -Give us the settings for colors -Give us the settings for colors -Give us the settings for colors -Give us the settings for colors -
@gweikecloud41782 ай бұрын
pls join the FB group to grab the settings - pls join the FB group to grab the settings- pls join the FB group to grab the settings- pls join the FB group to grab the settings
@tajriojas87423 ай бұрын
What lightburn license will the G2 need?
@gweikecloud41783 ай бұрын
pls find it in G2 facebook group
@tajriojas87422 ай бұрын
@gweikecloud4178 thanks for the reply. Don't have Facebook.
@gweikecloud41782 ай бұрын
@@tajriojas8742 pls leave us a message on whatsapp, let me share you +86 15850677817
@NickCent3 ай бұрын
not being recognized by Lightburn on my laptop. So, how do we manually add the device?
@NickCent18 күн бұрын
Got to install the driver you're propmted to during first steps of installation if you get me. Install the driver first.
@NickCent3 ай бұрын
No protection glasses needed?
@gweikecloud41783 ай бұрын
better keep it on, but we are fine actually
@mrsylk693 ай бұрын
Hello. Can this be a achieved with a 50w CO laser? If so, what engrave setting do you use?
@gweikecloud41783 ай бұрын
not really i suppose, better proceed with a fiber laser
@jurazzblady30083 ай бұрын
I import a picture and I can see normal picture not a bit map so laser can't engrave it. How to change it into bit map?
@gweikecloud41783 ай бұрын
pls leave us a message on whatsapp +86 15850677817
@stuboxx4 ай бұрын
My rotator dosnt work properly, is it meant to only engrave on one stroke of the pass not both ways?
@Shimizilla4 ай бұрын
Lightburn 1.7 with Galvo license activated under macOS can not find the laser. G laser works fine. Is there some kind of serial driver needed?
@bertrandmichaud19994 ай бұрын
same for me, same problem Lightburn cannot find the laser
@Shimizilla4 ай бұрын
@@bertrandmichaud1999 Because the software is in very early Beta status, i think of that not every hardware is supported right now. I hope that this problem will be solved soon. I really hope it 🙏.
@jgoudey44774 ай бұрын
Lightburn is still working on the G2 interface its supposed to be ready sometime this summer. Gweike uses a proprietary software and controller for the G2 thats why its taking so long
@mslee889Ай бұрын
Yes same as mine. I use Mac and can’t find the laser LB 1.7
@chuckmcbrayer4 ай бұрын
Hello my friend, great to see the live
@gweikecloud41784 ай бұрын
see u next time cm!
@chuckmcbrayer4 ай бұрын
Hello
@renaissanceman84244 ай бұрын
Ive used your exact settings on a brass coin and after a full hour of engraving, over 200 passes, it barely marked the coin. There was 0 depth. My Xtool F1 did a better job marking.
@gweikecloud41784 ай бұрын
pls reach out to our customer servive to get personal tech support group, will help figure it out, btw 2w infrared would never get a chance to compete with a 20w fiber man
@manuelroth62444 ай бұрын
Thanks for the Live. Unfortunately I do not see any value if no settings and other adjustments/settings are shared. We just get presented what the machine can do...
@gweikecloud41784 ай бұрын
will share in the group shortly
@gweikecloud41784 ай бұрын
will share full setting on LB on next week Live, pls stay tuned!
@wimvanertvelde4 ай бұрын
Light burn also has depthmap engraving I think. I wonder how that is gonna turn out. Can't wait to test
@macrokefag84064 ай бұрын
Hi. I recently bought a G2 device. Unfortunately, I can't get it to work. I get the message "The machine is in state of processing pause!" What is the solution? Please help!
@gweikecloud41784 ай бұрын
pls leave a message to our whatsapp +86 15850677817
@stuboxx4 ай бұрын
Im trying to engrave an image on a cup onstead of an svg, the chuck and the rotator wont soin as in engraves it jhst moves the laser and only emgraves on way in one line 😊
@gweikecloud41784 ай бұрын
pls reach out to our customer service to get yourself a tech support group
@shittymcgurgles4 ай бұрын
Settings?
@fabiannorrmann47994 ай бұрын
Is there a tutorial on how to install the driver?
@gweikecloud41784 ай бұрын
V1.6 will be available shortly! just download the Lightburna n follow the instructions, it will work
@samrix57934 ай бұрын
Looks great can't wait till it comes out
@gweikecloud41784 ай бұрын
V1.6 will be available shortly!
@The_real_chrisstahn4 ай бұрын
Do you need any more beta testers? PM. Me. I’m happy to help. I’m excited to use the G2 with LightBurn 🎉
@hippolyteleroutier70184 ай бұрын
how can you engrave a glass that is smaller on the bottom than the top and not a perfect cylinder ?
@hikingandhighrises4 ай бұрын
How long did this take and what dimensions for reference?
@wimvanertvelde4 ай бұрын
It doesnt say how many passes and how to do the clean pass afterwards...
@gweikecloud41784 ай бұрын
countless passes for a 1-2-hours-work man
@giampierodegidio95704 ай бұрын
the camera is used for what?
@shavygameplays23914 ай бұрын
will the machine be compatible with lighturn software? that would be a very strong point of sale for it
@gweikecloud41784 ай бұрын
next month, stay tuned!
@cosmintudor40694 ай бұрын
How long it took to engrave it? And what the settings are?
@Shimizilla4 ай бұрын
Excuse me sir, in my eyes it seems to be a lion 🦁 not a tiger 🐯
@gustavobaeza38905 ай бұрын
Can you explain how you the the 30oz black tumbler on the back wall?
@mrd76105 ай бұрын
the menus you clicked on are not showing in the video, and most of the explanations are directly read from the manual, so it's not the most useful tutorial
@kevinwkim5 ай бұрын
also there are some errors connecting to network on iphone app, do you have any support files to reference it? on the step of "Configure the network" where after connecting to your local WIFI network, getting an error as following "Failed to connect to the device. The default WiFi of the device is G_Laser. The specified WiFi is G_Laser"
@gweikecloud41785 ай бұрын
hello kevin, pls reach out to our customer service and get personal support team to help figure it out
@bookingclub5 ай бұрын
Bonjour, Pourquoi cette machine ne grave pas le bois ? c'est un truc de ouf une 20w
@gweikecloud41785 ай бұрын
because fiber laser and co2 laser have different wavelength which allow them to engrave on different materials
@rockyblankenship11665 ай бұрын
Educate me please. Does it mater where the laser is pointed as long as they are at the same spot?
@gweikecloud41785 ай бұрын
basically, better keep the dots at the middle
@sachie1233 ай бұрын
Just received my G6. This is not required with auto focus, right?. How do we set up with Lightburn?.
@gweikecloud41783 ай бұрын
@@sachie123 hello sir, pls leave us a message on whatsapp +86 15850677817
@akhtarhussain1110745 ай бұрын
Rotery attachment
@Monzox5 ай бұрын
thanks, good work!
@nicholevillanueva76395 ай бұрын
Where can we find settings you ran on each material? Or will you do another video going more into settings for the material?
@gweikecloud41784 ай бұрын
pls get them in our G2 FB group
@DjBillyT6 ай бұрын
I have gweike laser, please can i get these parameters but for lightburn