Hi I followed your video and the replacement of a part of the exhaust with a connecting pipe between collectors and terminal I mount Akrapovic terminal can it go well on mine and if please send me the link where to buy it Thanks Fulvio
@dreyna60414 күн бұрын
Just bought a 25 zx6r that exhaust is cheap and sounds great mind sending a link to everything you bought off ebay?
@moto.dad812 күн бұрын
The links I had are no longer working (it's been a while since it was bought). I just searched for "slip on exhaust 2024 ZX6R" then I checked reviews. If there are a lot of complaints of parts not fitting, I find a seller with better reviews. Hope that helps and congrats on the new bike!
@ryconn13Ай бұрын
Can you put a link for the Servo
@moto.dad8Ай бұрын
Just go to your favorite parts store (online or in person) and look for a servo buddy. I got mine from Revzilla but a lot of places have them. The '23 will fit if it doesn't say '24 on it.
@ryconn13Ай бұрын
@@moto.dad8 thanks
@marcsaadeАй бұрын
I love how he’s showing me his back all video while working on the bike, how am I as a watcher supposed to know what you’re doing
@moto.dad8Ай бұрын
Nothing wrong with just keeping it moving. Thanks for the comment though, they all help ;)
@suser98a2 ай бұрын
Can I put a slip on exhaust on a brand new 2024 zx6r without any problems like a check engine light? Thanks in advance
@moto.dad82 ай бұрын
You either need to leave the servo motor installed/plugged up with cables secured, or remove it and get a servo buddy like I did.
@223D_2 ай бұрын
Is this like anti backpacking?
@moto.dad82 ай бұрын
This is I don't backpack anyone on my sport bikes (wife and kids included).
@kushologistgaming21303 ай бұрын
Send me the link on the slip on please
@moto.dad83 ай бұрын
The link I had is no longer active. I just searched my bike/slip on exhaust on eBay.
@Bajaheat3 ай бұрын
Why can’t you leave the servo? I’d think if you just unhooked the cable and left the servo plugged in that it would be fine but I could be wrong
@moto.dad83 ай бұрын
You can, but I didn't want the cables left on and the weight of the servo. Either is fine, I just prefer to remove as much weight as possible.
@DaRealBaz3 ай бұрын
Great vid, thanks
@moto.dad83 ай бұрын
Glad you enjoyed it
@hunterblack14953 ай бұрын
This is the best video I found for mounting. Thank you
@moto.dad83 ай бұрын
Thank you very much! I am glad it helped!!!!
@santyclause80343 ай бұрын
I don't understand ppl who post a YT upload of their back when the title claims it is a slipon exhaust install video.
@moto.dad83 ай бұрын
What are you even talking about? It is a slip on install video.
@preciousrayalcontin64513 ай бұрын
i need the link for this exhaust, someone help me out
@moto.dad83 ай бұрын
I don't have the link anymore, but it was on eBay. Just search pipes for your specific bike. May have to check often as they come and go on there all the time.
@joseantonioelizaldepliego90043 ай бұрын
No ECU flash needed Right?
@moto.dad83 ай бұрын
Correct, since the CAT is still on there, it's not really needed (in my opinion).
@coltondube7924 ай бұрын
Got the same exact exhaust as you, just installed it and I have a slight exhaust leak going from the cat into the link pipe, did you have any problem with any leakage? I got the clamp pretty tight but might have it on wrong. Just curious but it sounds so good for the price so I’m happy
@moto.dad84 ай бұрын
No exhaust leak on my end, at least none I could notice.
@ervingreen44434 ай бұрын
This is what I’ve been looking for!! Thank you sir!!
@moto.dad84 ай бұрын
Glad to help!
@mlunaarancibia4 ай бұрын
Tienes los planos para la imprecion en 3d de los soportes por casualidad
@moto.dad84 ай бұрын
No I do not.
@tupapalote234 ай бұрын
your voice over the video is really low you should increase the volume for your videos like this. i had to stop everything in the background to be able to listen to you.
@moto.dad84 ай бұрын
Sorry about that
@pitchforkpeasant62195 ай бұрын
Nice rideS👍😁👍
@moto.dad84 ай бұрын
Thanks 👍
@gundalvlgalvling45845 ай бұрын
did you add block off plates? if not does it pop on decel?
@moto.dad84 ай бұрын
No block off plates. It has a slight pop on decal from high revs but not a lot.
@adamswaz48785 ай бұрын
I see the sc $140 dollar one but in the pic it shows a smaller straight pipe not the twisted one. Trying to purchase the same as yours .
@moto.dad84 ай бұрын
They have different ones with different options. The one I bought isn't showing up anymore so you just have to search.
@kylephilips15485 ай бұрын
Any chance u have the link for the exhuast with the pipe I can’t find it
@moto.dad85 ай бұрын
It's just a eBay cheap one. Just search your bike on there and dozens will pop up. Read reviews and question on the products to make sure it will fit yours.
@kylephilips15485 ай бұрын
@@moto.dad8 I did but it shows a different pipe then the one u had
@FerrariKidd5 ай бұрын
Why do you need to remove the servo motor and what's the original purpose of it?
@moto.dad85 ай бұрын
It opens and closes a valve in the stock exhaust. Since that exhaust was removed, the servo motor is no longer needed. Just adds extra weight.
@stooleet53695 ай бұрын
Idk if it is Fake Sc project. But if this is the Real one. This is not eBay cheat stuff. This is Italian little Factory. Where everything is made by order handly
@moto.dad85 ай бұрын
It's a knock off as stated in the description. I am going full system and didn't want to spend $500 on just sound. It is what it is.
@vigilant.6 ай бұрын
Ugly looking exhaust 🤦
@JJ-030306 ай бұрын
For the breather box you can roll it off with the tire if you got it raised for it to spin. Comes off in seconds.
@thadc59376 ай бұрын
Man i need a job with you! Lol i love the bikes and the garage setup. So sick!
@moto.dad85 ай бұрын
Much appreciated!
@tristanbased-af21596 ай бұрын
Why is there a servo on the exhaust???
@moto.dad86 ай бұрын
It opens and closes and valve on the exhaust to regulate the airflow coming from the exhaust.
@tristanbased-af21596 ай бұрын
@@moto.dad8 ahh okay, thanks! Is that for warming up the engine faster with more backpressure? Or in general for fuel economy?
hey nice sound, one question, does fits, the previous model?
@moto.dad87 ай бұрын
Yes, the only thing different on the 2024 is the front fairing/headlights and TFT display. The engine and mechanical parts are the same as 19-23 I believe.
@kkzgarage46897 ай бұрын
Tks man
@MrSay28017 ай бұрын
Great job... how much you charge for the work?..
@moto.dad87 ай бұрын
It's an easy job that I did myself. I don't do that for a living.
@styrofoam157 ай бұрын
Why does the breather box need to be removed? What happens if I do, or don’t remove it?
@moto.dad87 ай бұрын
The slip on is designed to remove the breather box. It's a huge amount of weight that offers no performance.
@Wuainoloco7 ай бұрын
If I live the servo motor whit no cables do I need a servo buddy ??
@moto.dad87 ай бұрын
I don't believe so but I've never done that so I can't say for sure.
@christianmarchini81867 ай бұрын
Poi quando vai in revisione ti mandano a cagare
@Italianborn8 ай бұрын
You must shaved off at least 4 lbs LOL
@moto.dad88 ай бұрын
It was much more than that. It was over 15 lbs saved (I can't remember the exact number).
@Italianborn8 ай бұрын
Do you have the name and serial number of that exhaust ? Also what is that servo you were talking about and why did u take it off ? Just bought the same bike and need more sound to it as well
@moto.dad88 ай бұрын
It is just a cheap, eBay slip on exhaust. The servo is for the stock exhaust. I removed mine and added the servo buddy for weight savings and space under the rear seat.
@Italianborn8 ай бұрын
@@moto.dad8 i just don’t understand what is the servo, what is it’s own purpose..it looks like some kind of ecu
@PVo-11119 ай бұрын
Anything i dont care if you sawzall off the exhaust, is better than stock. I hate sounding like an electric toothbrush going down the street
@moto.dad89 ай бұрын
Amen to that!
@songwriterdc18999 ай бұрын
I installed this exact exhaust on my 23 zx6r based on this video, i like the exhaust, its quite a bit louder than the stock. i used the baffle though, i will eventually upgrade to a better exhaust but for now this works fine to get rid of the huge stock exhaust
@moto.dad89 ай бұрын
Hell yeah! Not bad for the price especially if you plan on going with a full system down the line.
@braulioadorno61549 ай бұрын
I also have a 2024 zx6r and it doesn’t flicker when I press on the brake, any idea why?
@moto.dad89 ай бұрын
If you have the TST integrated tail light, there is a button on the back of it (under the seat) that changes how it flashes. If you have the stock tail light, it does not flash.
@silaspereira826910 ай бұрын
Topissima
@moto.dad810 ай бұрын
Thank you!
@alexanderscott253310 ай бұрын
You don’t have to take off the right side tail fairing. You can start from the bottom at the butterfly valve and work your way up.
@moto.dad810 ай бұрын
Yes you are correct! I just prefer to see which is why I took it off but you are right, it is not necessary.
@IAmtheGodOfWar210 ай бұрын
Do you have the link for which one you got?
@moto.dad810 ай бұрын
I don’t have that specific link any more but if you go on eBay and search your bike and just enter “slip on exhaust”, you will see an array of options.
@dg806210 ай бұрын
I would DEFINITELY have that ecu flashed now, can almost guarantee you it's starving for fuel! Another way they get them to pass emissions, they run super lean from the factory.
@moto.dad810 ай бұрын
Once I go full system, I will get it tuned. Right now it runs just like it did with the stock exhaust, flat spots in the same areas as stock.
@naception2 ай бұрын
The cat wasn't removed. He is probably fine.
@user-gn9oy9xk1y10 ай бұрын
I have the 2021 zx10r with the real SC project, that cost me about a stack & 3 weeks for shipping,I can tell you right now sc project don’t even make link pipes that curl like that🤣🤣🤣everything they got is pretty much straight pipe,I would definitely recommend you stop being cheap n get the real deal,mines is flashed with the pops & bangs so believe me it definitely shots flames
@moto.dad810 ай бұрын
Read the description or watch the video before commenting, thank you :)
@SammyHammy36710 ай бұрын
Where do you buy the exhaust/slip ons?
@moto.dad810 ай бұрын
It was from eBay. Thanks for watching!
@andrewhopson977710 ай бұрын
Does anyone know the song in the intro? Please help lol. I want it badly.
@moto.dad810 ай бұрын
I don’t remember the name but it is from the epidemic sound website.
@traeb886610 ай бұрын
Great video. Question, did you use the db silencer in line with the mid pipe.. or does it have a removable baffle installed at all? Thanks in advance
@moto.dad810 ай бұрын
No, I did not use the db killer at all. I like the sound without it for sure. LOL
@traeb886610 ай бұрын
@moto.dad8 awesome thanks brother! Safe riding
@moto.dad810 ай бұрын
@@traeb8866 thank you sir and the same to you!!!! Keep the rubber to the road!
@eughinegaring951110 ай бұрын
Do you need to tune the bike after installing the slip on?
@moto.dad810 ай бұрын
With the cat still intact, there is no need for a tune although the bike is lacking from the factory. It still has the same flat spots that it did with the stock exhaust.
@wb794210 ай бұрын
It sounds good. I assume it's exhaling easier (with less backpressure) now. So don't you need to recalibrate the air/fuel ratio (or retune it somehow) now?
@moto.dad810 ай бұрын
With it being just a slip on and the cat still intact, it runs just fine without a tune. It still has the same flat spots in the rev range as stock. Once I go full system, I will get the ECU tuned for the mods.
@wb794210 ай бұрын
I have more questions. How can I email you?
@moto.dad810 ай бұрын
@@wb7942 sure, just email the one on my channel page 👌
@RU-pj5rt10 ай бұрын
Did u need a servo buddy for the slip on since the servo got removed? It throw a code?
@moto.dad810 ай бұрын
I did install the servo buddy and no code was thrown (didn't start it without the servo buddy) although without it, it will throw a code/CEL
@Storm6r10 ай бұрын
I bought an ebay exhaust similar to this one. Was wondering if you have any exhaust leaks? I have to use a little bit of gasket sealer to close it up a little
@moto.dad810 ай бұрын
I haven't had any with mine so far. I don't plan on keeping this on too long though, going full system over the winter.
@autosmotosyalgomas36775 ай бұрын
Could you share the link for servo eliminator please ?