Bob Morrison

Пікірлер

@wildfire99 4 күн бұрын

❤❤❤

@SerkanUSA 16 күн бұрын

Same problem same camera model

@jerryw5508 Ай бұрын

I tried sticking my suction cup in boiling water for about 15 seconds to soften it up. Will give that a try first. Then maybe this method from Bob. I have tried velco but the camera wiggles back and forth. Thanks for the information.

@ThePriceIsRising Ай бұрын

My dashcam uses 3M stickers, not suction cups. It still falls off in the summer heat. The magnet idea is a good one, but the weak point is the 3M stickers.

@wesleyhester4284 Ай бұрын

You just proved an old guy CAN find new tricks! Thank you sir.

@kikeflores8448 2 ай бұрын

awesome idea Bob, could you inform me where to get the magnets and the adhesive pads, thanks for your advice 💯👍

@AMKTASSETMANAGEMENT 2 ай бұрын

M3 tape won't stick to the suction cup from heat high in the summer. Do you have suggestions besides super glue?

@ThePriceIsRising Ай бұрын

I just posted that my dashcam only uses 3M and it falls off constantly in the summer. I will try epoxy gluing the magnet to my dashcam mount.

@jasonnguyen4140 3 ай бұрын

Thanks bob!

@RPBailey 4 ай бұрын

In 2023 the same package is almost $20! Thanks Joe Biden!!

@JohnMerryman 4 ай бұрын

Great tip! Ordered magnets today. Thanks

@hexamo7985 4 ай бұрын

Thank you I've been doing some measuring and some extra space with 2 invh spacers I'm putting 12 wides 20 inch rims with skinny tires and after I get it installed I'll get it up on my channel with a walk threw for anyone else want a more aggressive look with there escape

@stevejohnson9435 4 ай бұрын

👍👍👍👍👍 Great Idea👍👍👍👍👍

@AbilovRamin 5 ай бұрын

Hello sir. You said in the comments that you would put a video on how it rides. It Whoud be very nice. Thank you.

@brom1857 5 ай бұрын

Have tried this - sounded a good idea, but the magnets were too heavy, and in hot weather, the glue on the sticker softened, and the dashcam fell off. I have now found the answer, when the plastic suction disc becomes stiff, causing it to part company with the windscreen, is simply to pop it in a cup of hot water. 5 minutes later, retrieveit, dry it off, and reattach to the windscreen. The plastic has been miraculously re-invigorated, and the suction pad stick like glue again!

@rixiang 6 ай бұрын

cool

@mch2359 7 ай бұрын

Looks like it will work in a pinch. An issue with all strong magnets.

@AndreAmirLive 7 ай бұрын

Great Idea

@HonestMagnet 7 ай бұрын

Thanks Bob

@zanetrain1651 8 ай бұрын

hahaha, loved the, "where the f are you going" towards the end. That would have been the same thing that came out my mouth in the same situation lol

@samiiromaar 8 ай бұрын

This is a nice concept. But practically very bad. 1 - It might ruin your camera 2 - although its strong, screws are stronger 3 - it blocks the ability to mount on other things that don't have magnets.. which is crazy. I've been mounting mine on a weightless lightstang and its been so useful. Covering the 3/4 thread doesn't seem like a good idea. 4 - quick release exists and make for a much better mod

@samiiromaar 8 ай бұрын

BONUS: YOU CAN UNLATCH THE TRIPOD FROM THE EXTENSION .

@The.Incliner 8 ай бұрын

A lot of cameras now use magnets. My new camera I just bought the Insta 360 it uses magnets. I don't think magnets are gonna be an issue. Magnets may have been an issue with the old style cameras, Canon , Nikon, etc.

@richardpcrowe 8 ай бұрын

Bob - if you hold your phone in the horizontal position when shooting your video - you will end up wit a full frame rather than just a smidgen down the center...

@tricepilot 8 ай бұрын

EXACTLY what I was looking for! I already have those super strong disc magnets and needed an idea to keep my dash cam suction cup stuck to my truck windshield. Thanks for making this video!

@plamentv 8 ай бұрын

a really handy idea. It's kinda annoying every time to screw and unscrew those parts :)

@steovorford 8 ай бұрын

I fucking love you Bob. Please keep making videos

@garbennett4758 8 ай бұрын

Was that on a high or medium heat?

@The.Incliner 8 ай бұрын

Probably high.

@garbennett4758 8 ай бұрын

Thank you

@optimixxx 8 ай бұрын

nice job !

@jerardnorgren3411 8 ай бұрын

Sharp ride. I have the same vehicle. Thanks 4 the info.

@markmaclaren4223 8 ай бұрын

Bob, is a really great description and explanation of the DJI Gimbal. You should work for DJI! Have you apply something like these ideas and techniques for a DJII mini 3? Best, Mark

@miba8303 8 ай бұрын

Liked subscribed ....keep creating! Take care. Waiting for shots...

@YoungBlaze 8 ай бұрын

You do know that the company small rig actually makes something very similar to this

@The.Incliner 8 ай бұрын

Yes I just saw that. Even ordered it.

@RyanKorea 8 ай бұрын

What's the small rig one called? I couldn't find it

@kraggman 8 ай бұрын

Good idea !! Well done !!

@markifi 8 ай бұрын

that attachment is already a quick release mechanism. why add a second one?

@Ozpeter 8 ай бұрын

Yuo. You can leave the little base piece attached to the tripod and then click it on and off as required - and I suspect it holds even more strongly than the magnet. But this is a clever alternative - some people like to keep the base piece on the P3 all the time to provide more of a handle.

@markifi 8 ай бұрын

good point@@Ozpeter i always forget other people have larger hands

@hanworld6565 9 ай бұрын

nice idea!

@JustinPulitzerTrades 9 ай бұрын

This could be done with a quick release mount. Ulanzi and Insta360 make good ones.

@AndrewVanBeekOttawa 8 ай бұрын

Yep, and it will work on everything you own with the mount. I have the F38 on everything.

@The.Incliner 8 ай бұрын

I have a 360 Go3 but I wanted to get something quick release for my DJI Pocket 3. I'm not a big fan of the GoPro hookups. The magnet setup I made works really good.

@emartinez620 9 ай бұрын

Sir that’s a good ideas but a bit lazy

@The.Incliner 9 ай бұрын

That's me! 😂

@kenstudios 9 ай бұрын

Question: Do those magnets cause any interference with the camera or the screen? I know magnets theoretically can cause electronic interference to a certain degree.

@The.Incliner 9 ай бұрын

Nope works perfect

@1000xp 9 ай бұрын

Very cool Bob, show us your next adventure

@lumixS5M2 9 ай бұрын

Ver nice idea, thank you.. Let those young kids do negative talk, they all buy there stuff. Idea, just make u plastic or alu piece to drill the hole in for 1/4" crew. And glue the magnet to that plate. Or, use the original big 1/4" plastic screw and glue the magnet against this. No drilling needed this way.

@gigihanmandarin 9 ай бұрын

Sir, with all due respect, I strongly disagree with you showing the world such a flimsy DIY method. I know the magnets you used are strong, but others may not use magnets as strong as yours and an accidental karate chop to the top part can trip and ruin the camera, especially when the gimbal is the weakest point of the Pocket 3. The recommended method is to use a quick release system (for example Ulanzi F38 system, or PGYtech Quick Release clamp and plate). I know you mentioned multiple times that you do not recommend others to follow your method, but the fact that you made a video about this and put it on KZfaq..........

@The.Incliner 9 ай бұрын

Many companies have magnetic tripods, magnetic holders, for the cameras, magnetic phone holders, magnetic filters, etc. I appreciate your comment though thank you.

@BastardSquad 9 ай бұрын

Pipe down Karen

@adrianmosquare 9 ай бұрын

@@BastardSquadbro is the mount Karen😂😂

@shotbyarian 9 ай бұрын

cool idea!

@iamleek 9 ай бұрын

That's is a amazing what you have come up with. Thank you for sharing. Brillant idea. 😉

@PlugInGuruVideo 9 ай бұрын

I'd be SUPER cautious with powerful magnets around something not built with strong magnetic fields taken into account. You'll ruin your camera. This video should be viewed with EXTREME caution.....

@The.Incliner 9 ай бұрын

They make really strong magnets for tripods for all kinds of cameras GoPros also you have magnetic holders for phones in your car I don't really think it's an issue

@joelconolly5574 7 ай бұрын

Nah it's fine. Magnet's far from any electronic parts. It won't die.

@photographerjonathan 9 ай бұрын

I like what you did with the magnets. it just points out that DJI should've made the Pocket three with a magnetic mount just like the action 4. and the USB and Tripod mount should be build into the main unit. why have such a big attachment just for a USB port and tripod mount. and if you are going to have an attachment, the attachment could be a quarter that size. and the built in battery also sucks. I am hoping that the Action 5 will have the one inch sensor.

@francoismarc3 9 ай бұрын

That's neat!!!

@dizzycreates 9 ай бұрын

Pretty cool. I'd be afraid of the magnet ruining the electronics though, personally.

@The.Incliner 9 ай бұрын

They have magnetic tripods to hold all kinds of cameras GoPros action cameras and also they have strong magnets to hold your phone in your car so I don't think it's really an issue the old phones cell phones that was a problem.

@olyyourfriend 9 ай бұрын

@@The.Incliner true

@wpkambiancesounds 9 ай бұрын

@@The.Inclineryou are right. Plus is not directly attached to the gimbal but the attachment.

@user-rx8wc2id9u 8 ай бұрын

Magnets aren't really a problem for electronics anymore.