please reach out misha charoudin and let him do a review
@FreakensNL29 күн бұрын
@HabibiBoost would be great to see him drive it on the limit!
@Skunkkie42028 күн бұрын
@@FreakensNL yes that would be amazing ! Also nice vid & lap 💪 and lovely car ofcourse 🔥🔥
@TravisBirdsallАй бұрын
Thank you so much! 😆
@ianedmonds9191Ай бұрын
Such a shame the camera is placed filming the mirror right in the middle of the shot where we should be seeing the road in front. Maybe you can change that in a future video? Luv and Peace.
@FreakensNLАй бұрын
@@ianedmonds9191 see my latest video ;)
@katlinkukk7778Ай бұрын
How did you leave the original shifter with the ep3 gearbox?
@FreakensNLАй бұрын
@@katlinkukk7778 changed the pivot mechanisme to the other side. Some welding and drilling but nothing to extreme.
@katlinkukk7778Ай бұрын
@@FreakensNL so its all original from the shifter side?
@katlinkukk7778Ай бұрын
@@FreakensNL did you use original mr2 shifter cables?
@FreakensNLАй бұрын
@@katlinkukk7778 no, honda cables, mr2 shifter but modified box
@ovidiuangelАй бұрын
Can you tell me the pinout please
@FreakensNLАй бұрын
1 = 12V, 2 = switch (to earth), 3 = earth
@beulahnick2 ай бұрын
I was in the corvette that was constantly holding you up. sorry about that! 😅
@FreakensNL2 ай бұрын
Haha no problem, loved the yellow colour btw! It was also too busy to really drive close to the limit. Also mid engine cars in the rain, not the easiest to drive👌
@NdeVree-eo3gd2 ай бұрын
Leuk om te zien! Ik dacht dat er iets aan de hand was met mijn auto. Bleek de 'pops' van jouw uitlaat te zijn. hahaha Wel echt slecht weer om te rijden! de sessies ervoor waren beter. :)
@FreakensNL2 ай бұрын
haha ja lekker klap bij terugschakelen. wat een pech idd, hele tijd zon en dan plenzen voor wij de baan op gingen
@NdeVree-eo3gd2 ай бұрын
@@FreakensNL Ik had de zonnige sessie nog mee kunnen pakken. 'T scheelde bijna 30 seconde op een ronde. ;)
@MaybachFreak2 ай бұрын
Dikke video! Probeer de volgende keer in bochten niet het stuur over te pakken maar kwart voor drie te houden. Dan houd je veel meer gevoel met de weg en kan je ook snelle reageren als het moet.
@FreakensNL2 ай бұрын
Bedankt voor de tip! Zal er aan proberen te denken volgende keer
@zeikneus11922 ай бұрын
was een leuke sessie! heerlijk om even achter je te rijden, de vlammen waren spectaculair. (rode fiesta mk8)
@FreakensNL2 ай бұрын
Haha ja was mooi, jammer net van de regen, vind ik toch spannend in de mr2
@jelvasch2 ай бұрын
4:08 word die gele auto nou ingehaald door een ford fiesta ecoboost
@zeikneus11922 ай бұрын
de gele corvette c8 werd inderdaad ingehaald door mijn ford fiesta met kinderstoeltjes achterin
@jelvasch2 ай бұрын
@@zeikneus1192 hahahaha wtf
@mijnnaamisaaron2 ай бұрын
Leuk die DocTronic wifi module
@Leo_Bami2 ай бұрын
Waarom gebruik je de ruitenwissers niet?
@FreakensNL2 ай бұрын
Gebruik Rain-X, zal voor de volgende keer ze wel aanzetten, beter voor de video
@jbob71482 ай бұрын
Nice build but do you suck as a driver? Why can't we see you actually go around the track instead of these cuts? I get no sense of how the car actually performs.
@olivern45632 ай бұрын
What transmission did you use? If you were to redo it, which transmission would you go with? I’ve got a NA shell, just putting together the build list. Thx!
@FreakensNL2 ай бұрын
The EP3 6speed, with Mfactory LSD. If i would do it again, 100% same trans (maybe 5 spd for turbo) but I would keep it NA. k24/20 and max that out.
@ReneBold2 ай бұрын
Angsthase :-) but hey safety first
@FreakensNL2 ай бұрын
Hahaha indeed, fresh build so also a bit more RnD to do. I predict next track day I will have some of jy suspension issues sorted
@PwnageJ2 ай бұрын
500hp in such a light car must be extremely exhilarating to drive!
@Jspektuning3 ай бұрын
May I ask what turbo manifold or turbo kit is this?
@FreakensNL3 ай бұрын
Made to request by Jessy's custom exhaust shop
@jaylakejr3 ай бұрын
Thank you for this video. I am wondering if it is possible to split the three wires and have a second valve. I have tried this and it doesn’t seem to work. If I disconnect 1 actuator it works again but when I plug both in neither work. I have wired them straight through. Any thoughts?
@FreakensNL3 ай бұрын
I used 2 valves, connect the device parallel. Works the same then
@joIVOjo23 ай бұрын
Heel gaaf project! Hoeveel levert dit blok nu?
@FreakensNL3 ай бұрын
Bedankt! Moet ooo zeggen, erg geslaagd. Op 1bar 450pk op de wielen dus ongeveer 500!
@joIVOjo23 ай бұрын
@@FreakensNL holy shit, heel netjes!!
@jdm__james_4 ай бұрын
very clean build! she sounds great on the track!
@Saxofaxo4 ай бұрын
hm looks fun. Though a tad irresponsible. Already don't like all the noobs without proper training in kitesurfing. Its more fatal in paragliding. You didn't know how to out manouver and a lot of people came flying from that one side. Plus loads of people on the beach. Well, until something happens its all fun and joy.
@thangcacdi4 ай бұрын
how did you get your tachometer working with the K series transmission? Super clean build!
@FreakensNL4 ай бұрын
For my mr2 it was pretty simple; in Europe 92+ models have the electronic speedo so just sent the signal to the dash. Purple wire that runs thru the center console. Hook that up to the speed signal from the transmission. For the rpm you need to change 1 capacitor in the cluster. Same as when you put in a rev5 3sgte engine in an old rev mr2
@mr2kspain3 ай бұрын
1:57
@mr2kspain3 ай бұрын
@@FreakensNL@ talk about cap 100/22/6.8 uF for velocity and 2x10uF for Rpm? Is this change for kswap?, Can you give more info?
@user-oq3qe9sl9t4 ай бұрын
how did you get your stock cluster to work?
@FreakensNL4 ай бұрын
Bu going thru the worong diagrams. It is pretty easy if ypu understand read them. If ypu have a specific question, I can answer it
@user-oq3qe9sl9t4 ай бұрын
@@FreakensNL my speedometer is a mechanical connection to the transmission. what did you use to convert it to electrical for the k series transmissions? are using a k series transmission ?
@FreakensNL4 ай бұрын
@user-oq3qe9sl9t I understand. You need to first change oud your cluster for a newer version. Newer revisions mr2 have a digital cluster. The mechanical is a headache. So better to change it out.
@user-oq3qe9sl9t2 ай бұрын
Finally received my rev 3 cluster. Any diagrams on how to wire the cluster?
@user-oq3qe9sl9t25 күн бұрын
What size capacitor?
@justincase94714 ай бұрын
Did you forgot to upgrade your brakes? Please get some proper pads (Hawk HT10) for the track 😁
@FreakensNL4 ай бұрын
Do you know where to get them in europe? I'm working on installing 330 rotors front and back. To be honest stock brakes are pretty good for my driving style and i mainley do it for the look of the stocks in 18" rims. I like to be light on the brakes. Don't drive for times, just fun.
@idontgotagun98674 ай бұрын
How much does it cost to do a K-swap on an MR2? Much less a boosted K series? Curious because i’m debating on what to build, this or a 3000 GT VR4
@FreakensNL4 ай бұрын
K swap depends on what a swap cost around you, NL it is 3500 just the swap, mounts from the US 1500. Etc etc. Turboing the K, expensive if done properly. NA k20 In a mr2 is greate fun on the track I would even argue more fun and def more fun to work on and maintain
@user-hx1fs1um2q5 ай бұрын
Hello, my motor turns twice to the right with the connection as in the video. installed on the exhaust, it turns but does not find the opening and closing points. any idea how to fix this problem? I will make videos to explain THANKS
@FreakensNL5 ай бұрын
Correct, it is searching for the limits. I explain it in the video
@Canditi896 ай бұрын
Did you know connector model?
@FreakensNL3 ай бұрын
Yes it is in the description
@rafaek6737 ай бұрын
what about ford valve motor with 4 pin?
@dougiequick19 ай бұрын
Was it lighter oil than oem? Or level change? If not does not seem like it would make any big difference?
@FreakensNL9 ай бұрын
Same weight and level as oem, made a Hugh difference. Before the bike would feel unstable and not able to get my knee down, now it runs smooth in group 3 on the track (fastest group) 100% would do this with a bike I bought second hand
@creamyrust1239 ай бұрын
is it safe to prop up the bike like that? will it bend the exhaust pipes
@FreakensNL9 ай бұрын
Put a towel under it and a wide piece of wood. Not even a scratch
@FreakensNL9 ай бұрын
R1 just weights 180kg, on a heavy bike I would not
@Peachplayswhi110 ай бұрын
Jaaa go freek dat is mijn oom
@DrWagner10 ай бұрын
Most useful and underrated video for Shoei RF1200/NXR owners.
@rocketno4610 ай бұрын
Leuk en beheerst gereden! Interessante swap maar niet misplaatst, super gaaf.
@FreakensNL10 ай бұрын
Bedankt! Heb ook een filmpje van met de 3sge 156pk, leuk als vergelijking. Echt wereld van verschil in rijgedrag en beleving.
@t77snapshot11 ай бұрын
By any chance do you know how to remove the rear vent for cleaning? I can't find a video on it anywhere
@user-jb2iw7il8z Жыл бұрын
Que quantidade leva de óleo
@ClosestNearUtopia Жыл бұрын
I am deffenitely not dutch according to my accent..😂
@FreakensNL Жыл бұрын
Haha and proud of it!
@robgemmeke8783 Жыл бұрын
Waauw ... Super
@EddWolf78 Жыл бұрын
Man I’ve had my vent closed for the last 5 years thinking it was open 😂 Thank you for this! 🙏
@batra575 Жыл бұрын
THANK YOU SO MUCH
@alex-ground Жыл бұрын
Nice
@Grant7009 Жыл бұрын
5 years and I was never sure. Thanks👍
@valdirenejesus1323 Жыл бұрын
Lindo cachorro fofinho linda cachorra fofinha
@valdirenejesus1323 Жыл бұрын
Lindo filhote lindo cachorro fofinho dois
@faqui1969 Жыл бұрын
I don't understand why you mention kitesurfing, (apples- bananas) but anyway, this place looks awesome. Where is it?
@FreakensNL Жыл бұрын
It's the same my dude... pink or green apple.. still an apple You are clearly not a kitesurfer
@faqui1969 Жыл бұрын
@@FreakensNL wrong, I've been paragliding for 11 years and kiting for 3. Two complete different thinks. Clearly your new to one of them or both
@BaqPaqJaq2 жыл бұрын
Hi, your video popped up as suggested, I’ve just posted a video of some paragliders I filmed at Europe’s tallest sand dune last month! I found it fascinating, was a brill day. Thanks for making your video to show your progression! It looks difficult. Hope you’ll spare 3 mins to see my ground view of you amazing guys and your flying machines 🤣👍🏻. I’ve subscribed to you, look forward to seeing your progress! Jackie