Cheers, really helpful. Took me about 15 mins to change the bulb and the indicator unit because of this video

Thanks. So many manufacturers of new and modern tents these days tell you not to seam seal or waterproof your tent. It just doesn’t ned it. Big Agnes comes to mind. I think I’ll do mine, just in case?

Avoid EZ car care. Delivery times are atrocious, and the presentation looks like the wax that jack made in a kitchen.

Very useful. Thank you.

Are they still available

Why is "no increase in sound" (at about 06:28) an issue at all? Or is this channel all for show and not for go? I am surprised to hear that K&N does not improve performance, though.

But what on earth is QD???

I used the snow storm yesterday on my neighbours filthy old fiesta. It was amazing, the dirt just foamed out of all the crevices. I think it might be too caustic to use on a decent car. Might risk tarnishing the chrome etc. The wheel cleaner is my go to. I’ve been using it for years. I use it through an IK foamer. Amazing products

CAN U PLEASE TELL ME IS IT O.K TO USE A ENGINE FLUSH OIL ON A FORD RANGER BEFORE OIL CHANGE.

Hey there, do you have a link to the? Load Max kit. Please.

Excellent job, I will be buying Meguiars Scratch X2.0 because of your excellent review, thank you

Great Job Mate. From Florida!

What is a pending code?

That's why I prefer British instructions than American

Is it better than Nu Finish scratch Dr. ?

Top tips and instructions a great money saving video 10 out of 10

Excellent video thanks

Does drill let holograms ?

Just spent 2 hours trying to fix my rock chip with this product. Didn't work at all. Dont recommended.

You should have rubbed the scratch and not the full area. I found it good

This model in the vidoe is a PX2. PX & PX1 doesn't have dual battery mode.

Okay I went to three different glass shops One will call me back, Two said they could not do it because it was double pane? three wanted $190.00! So I got this kit and did it myself. But I over tightened it, and it broke one leg off the sucked cup.

Could you do a single coat of each one. Making the tent a summer and winter tent. Would the liquids mix together

it would be great to measure at start and at the end how many microns of clearcoat was taken by each polish....

thanks

Hi there, I've changed alll the indicator bulbs, do i need to change the indicator relay, as they're flashing fast.

Chips turned into cracks after I applied the withe thing 😢😢😢

thx i will try this on my guitar..

Hi Dave, thought you might know. I've got the same ranger as you and have brought some raptor wheels with ats on and the tyre pressure malfunction light keeps coming on I've reset it and tried a little fiddle in forscan...is there anything I'm missing? Thank you

Very nice analysis. Thank you.

fix #5; take the wheel OFF the car, remove valve core allowing as much air as possible to escape, break beed on the side where the valve stem is, 'peel back' tire to expose valve stem bottom, remove valve stem, install new valve stem with valve stem installation tool that you did not show, be sure to coat the base of the new valve stem with sealant, install valve core, inflate tire making sure the bead on both sides have seated (you'll hear an audible pop). Inflate to proper pressure. mount tire back on vehicle torque lug bolts / nuts to proper spec. ** note; if you have tire pressure sensors- you might have to remove the tire from the wheel- there may not be room to remove the sensor, especially with low profile tires. You can try, it might even be possible to leave the sensor on and remove the valve stem pushing from the top-- you'll have to cut the top of the stem off-- just be careful not to damage the sensor. I actually JUST got done doing this tonight. I was chasing a slow leak, while replacing valve core I noticed that when I move the whole stem just a little bit- massive air would stream out. Don't know how long I've been driving around like this but so glad I checked the valve core- never would have noticed the crack in the stem. Cheers everybody- drive safe.

Watched your video bought the g3 on your recommendation wow what a waste of money doesn’t work !!!!!

I used your discount code on an order today from in2detailing today and I brought back a fair few memories seeing your name. When my daughter was born, I was up at random hours in the night unable to sleep. I’d happily sit and watch your videos of the AliExpress reviews (I love a Chinese special bargain) and your other product reviews whilst the moon was bright outside and my daughter was having a few hours sleep before her next feed. Tonight I decided to watch a few more of your videos for the nostalgia. What fantastic content you made. You really spoke for the consumer in a direct and honest way that not everyone would. I can honestly say that I’ve missed your content, your witty humour and the actual truth about new ‘next gen’ products out there. I just hope you’ve not lost the drive to find products that work for yourself and the enthusiasm for keeping your family’s pride and joys gleaming. Hope you’re keeping well mate. These things don’t last forever but your content will be around for years to come that might inspire the next home brew KZfaqr (or not!) - they might learn a lesson or two and stay away to keep focus on another direction, who knows! I wish you all the best mate 👍🏻 You have gained a lot of respect from people over the years, intentionally or unintentionally, don’t forget that.

help a lot but my screw are difficult to open

TY. 👍 2023 XLT. Been wondering about that wire since purchase eight months ago. Now, I know.

I didn’t understand the point about fusso wax. Which one is better from fusso and ez wax?

Fantastic! Thanks so much! 🎸😃

Thanks mate 🫡🙏

Thanks for this video!!

Just did mine perfect result with applying lighter heat from the inside of the car to the resine helped a lot applied the resin twice

Really helpful thank you, and others say, straight to the point.. thanks

Interesting. Thank you.

I did my repair on a cool (55°F) but sunny day and here’s a tip that helped me: I cleaned the windshield with rubbing alcohol, then left the car in the sun for 30 minutes to make sure the alcohol evaporated and to heat the windshield up a bit. I then moved the car out of the sun into the carport and did the repair per the instructions. As I slowly turned the pressure driver, I watched from inside the car as the resin seeped into all the little cracks and crevices of the damaged area. I think pre-heating the windshield helped the resin flow easier.

what u favorite between this turtle wax or fusso?

Hi, thanks for the advice. What’s the coverage? I assume you’re using a 1L tin? Was this enough?

Beware! screwing the the center piece in also puts pressure on the glass and can cause a divit to turn into a crack several inches long, it happened to me, so the repair caused the thing it was meant to prevent !

Hello there. So did the TW Scratch remover effects and shine disappear after you wash it with water?

Hi!!. Are the yellow and blue cables 2:30 connected to each other or separate? Did they both come with the kit? Thanks!

Love what you have done to your Wildtrak :) Was wondering where did you get your tie down rails that are on the walls of your canopy?

Can still see all the scratches