interesting alternative tip to smoke and dye methods to find a leak.
@WelkingVue5 күн бұрын
I was having problem with the trigger, so I returned this impact wrench. Thanks for watching!
@danielorellanasalinas57237 күн бұрын
Que tipo de bombilla utilizaste?
@vuksavie33058 күн бұрын
that's honestly not bad for a bauer impact wrench, i thought it would be weaker but it seems to work with the third setting, its good with a quick work on one wheel, maybe you could use it when its all 4 wheels and check the battery when you do all tires
@WelkingVue7 күн бұрын
I think the battery wouldn't be affected much working on all 4 wheels, but I returned it cause the trigger stop working intermittently. I didn't want to deal with exchanging and getting another bad one.
@vuksavie33056 күн бұрын
@@WelkingVue makes sense baur isnt bad but i understand. to me baur isnt heard about as much as milwakee and dewalt.
@spiderwebu2799 күн бұрын
Very Very good Info, Thank You.
@Donnado-fd9pw10 күн бұрын
mine has never worked. Did yours come with instructions?
@WelkingVue9 күн бұрын
Yes it came with instructions. I ordered from Amazon.
@disabledarmyveteran13 күн бұрын
The fox well tester you have there can also test the charging system on the vehicle
@gordonw920816 күн бұрын
I've done well of bluegill and crappie recently, they don't seem to start biting until right before it gets dark.
@WelkingVue15 күн бұрын
I didn't know you fish for bluegill too. They're fun to fish when they are biting.
@EM-gx6nf17 күн бұрын
I miss your fishing videos. I know it’s hot you have your go earlier.
@WelkingVue17 күн бұрын
It was terrible out there during that time. Thanks for the support.
@simplewareable17 күн бұрын
Thank you. This helped me a lot. In 2020, I got a replacement engine under warranty. I got the car back, 2 months before I needed to register it. All smog related sensors were not ready, I followed all the damn cycling guides I could find that were supposed to apply to my car. Drove more than a thousand miles, (varying speeds, varying conditions) and attained nothing. Had to bring the car in to a smog repair shop where they put the car on a dyno and did the drive cycle. That service put a dent on my wallet. This guide of yours definitely helped me a lot.
@WelkingVue17 күн бұрын
Some cars take a lot more miles for all the smog related drive cycle to complete. I drive a 2015 Civic and a few years ago I thought it's never going to complete the drive cycle, but then one day I check, and all smog related cycle were completed. I drive a lot, so the time period didn't take long.
@koopakoop18 күн бұрын
Good old technique with soapy water and bubbles is the best.
@lisasimpson898519 күн бұрын
Thank you!❤️🥰
@MarcIsTheAnswer20 күн бұрын
Chuck Norris disapproves VC.
@Danny6611521 күн бұрын
Unfortunately this is a common issue for this Gen. It does affect performance!
@Charlyy.g22 күн бұрын
Thanks bro just did mine if it wasn’t for this video I wouldn’t have been able to do it thanks for all the tips and tricks
@WelkingVue21 күн бұрын
Thank You glad you were able to do it.
@FM-nk1zh26 күн бұрын
Thank you for that info on the carpet tape🙏
@gordonw9208Ай бұрын
The drawing was a great idea!
@purpledonatelloАй бұрын
Beware if your replacing this belt with oem from Honda the belt will be too short to fit. The one from Amazon seem to fit from band. This is a good video of a reminder.
@WelkingVueАй бұрын
I got the new belt from Auto Zone. If it was a tiny longer would be easier to slip on. It might eventually get stretch longer.
@purpledonatello29 күн бұрын
@@WelkingVue thanks for the recommendation. Please let us know how well belt holds up.
@WelkingVue15 күн бұрын
@@purpledonatello seems to be good I drive a lot already put in over 1000 miles.
@Gale_Force_RacewayАй бұрын
Thank you Welking! Use 7/32 sae socket (or if you have a super rare 5.5mm) - preferably 1/8" socket size with extension, just easier to move around. I will also say THANK YOU Welking, you're THE ONLY video to properly show how to pop that rear $^%##$%^& grommet lol ( @4:32 )-spray it with WD40 when reattaching. Also, The hose clamps usually stink - just reuse the old ones, but be sure to spray them first. LASTLY!!! IMPORTANT- VERY VERY COMMON ISSUE, and I see it on Welkings car too! PAUSE this video at @2:21, and look at the shiny rubber plug on the left side -- That needs to get plugged back in -- (((it looks like one of those Jewish dreidel toys with a hook on top))!
@WelkingVueАй бұрын
Thanks for the comment. The 2:21 time mark, I think that's the transmission fill plug. Whoever designed that didn't do a good job. That plug pop out too often.
@robertherrera4903Ай бұрын
❤
@whoyou5290Ай бұрын
omg i think my betta is the reincarnation of yours because my betta and your betta has the same color😮
@whoyou5290Ай бұрын
and same type
@askersatzАй бұрын
Good job! I'm going to copy you (but maybe not the steel stakes...) 🙂
@WelkingVueАй бұрын
It helps only a little.
@highspeedboomАй бұрын
He seems very kind. I liked this video and I was curious about the jb weld high heat epoxy 😊
WHAT SIZE TOOLS???? WHAT SIZE ALLEN KEY???? WHAT SIZE 😢
@user-rr7je8iw3bАй бұрын
Recommend using silicone spray when working with rubber parts. Spray a little and it will make it easier ro remove. Once removed, use a little bit in of that spray to the grummets then reconnect, much easier to install. You can also use a little bit of silicone paste to thoee grummets so next time it will be a piece of cake to work in that area.
@richreitz5815Ай бұрын
Great video. Thank you very much. God Bless
@WelkingVueАй бұрын
Thank You for watching
@richreitz5815Ай бұрын
@@WelkingVue this video saved me today! Good stuff
@TheMrBennitoАй бұрын
My jack looks like a clone of this one, yet I cant jack up my Camry 2.2 to its max height?!
@WelkingVueАй бұрын
Check the oil level.
@TheMrBennitoАй бұрын
I found your instructions quite helpful, as I did this job for the first time. The gasket of my transmission pan seemed to be in perfect shape so I kept the new gasket for the next round. The differential fill plug is indeed not easy to break loose. I decided to let it soak for some time in WD-40 ; spray ,respray . And ordered a ratchet with flexible head, as I don't have it in my toolbox. Again, thank you!
@WelkingVueАй бұрын
Thanks for sharing the short story.
@CeylonLastMileАй бұрын
is hatsan 1000s .22 enough for pest controlling at 50 meters? i mean monkey repelling.
@mp-xt2rgАй бұрын
its easier to just swap the post out.
@friday-gdАй бұрын
CLEAN IT
@defcon3security782Ай бұрын
Did you ever clean it up
@WelkingVueАй бұрын
Not yet I gonna try again tonight to get it out of the way.
@benchod3576Ай бұрын
I'm really late to the party, but I would like to say thank you for the video. It really helped me. Also, use the heat gun to your advantage. Heating bumpers will actually make black brand new again.
@WelkingVueАй бұрын
Thanks for the comment. Glad it helped you.
@TheMrBennitoАй бұрын
Always check the filler plug first?!! If it won't go , no way to get the fluid in?!
@josephorta2047Ай бұрын
I used to have one of those testers and I forgot how handy a tool that is. I am going to get one again, thanks for this video
@leehyeong96832 ай бұрын
@@a
@Susan-mg2gf2 ай бұрын
Thank you! This helped me replace it myself!
@WelkingVue2 ай бұрын
Good to know. Thank You.
@2stroke19712 ай бұрын
the regular old JB weld worked GREAT like 30 years ago. Guess they had to change the chemicals in it....maybe it caused cancer in rats or something. because it doesnt work for shit anymore.
@bongodrummer69142 ай бұрын
Dude after watching your entire video.......I feel sorry for your car
@bongodrummer69142 ай бұрын
CASTROL OIL IN A HONDA CVT TRANS......Bye Bye Transmission...nice knowing you
@bongodrummer69142 ай бұрын
REPLACE THE 2 WASHERS EACH TIME YOU CHANGE THE ATF.....ALSO REPLACE THE TOP FILL PLUG WHY NOT THIS IS YOUR TRANSMISSION AFTER ALL....HONDA WONT THEY WILL ONLY CHANGE YOUR ATF for $200.00 maybe they will replace the washers....DIY PEOPLE THE DEALERSHIPS ARE CROOKS!!!!!!
@bongodrummer69142 ай бұрын
IS YOUR CAR JACKED LEVEL ON 4 JACK STANDS ??????????
@adora77002 ай бұрын
Can i use this for thhn stranded wire?
@warrenfong5002 ай бұрын
Pretty lame video.
@juangarcia43442 ай бұрын
Nice video, I followed your steps but I ran into a problem, the rod that goes on the door handle it's broken or got out from where it's suppose to be (on the lower end). I tried placing it manually and it worked until I closed the door a little too hard and it got dislodged again. Any suggestions?
@WelkingVue2 ай бұрын
I don't remember how the rod is set-up. If the rod really is out of place, you would need to put it back in place. If the rod is dislodged from the door handle, maybe use a glue strong enough to keep them in place. Can't really make good suggestion without seeing it.
@davidiaquinta12382 ай бұрын
Hopefully i can find my clip cause it flew across my garage 😂
@Ice____________cold4202 ай бұрын
😂😂😂😂😂😂
@Exis2472 ай бұрын
Its really not a bad option, especially if you have a smaller lawn.
@WelkingVue2 ай бұрын
It uses less space too for storage and it's easy for transporting.