Such a great help. Thank you! I was going mad trying to fit the hose on an air conditioner. It’s now all up and running.
@StrongRN2 ай бұрын
Finally someone posted where those 2 "C" gaskets go! One question: Does it matter wheather the adheasive side is up or down??
@TalesFromTheTinkerage2 ай бұрын
I don't think it matters but I have found putting them in as shown works well. It also matches what I found the first time I opened our Dyson.
@StrongRN2 ай бұрын
@@TalesFromTheTinkerage Much appreciated!
@ecowomble17815 ай бұрын
I’m hoping you will be making some more videos?
@ecowomble17815 ай бұрын
I have the same dewalt. Similar issues. Mainly the chuck went on mine. I love Bosch but a bit out of my price range at the moment. I’m looking at perhaps Ryobi.
@shiftyshamsk8 ай бұрын
I bought a length of plastic pipe and cut it into bits to form a Zed Z shape, then used that to vent it outside through the hole in the wall. It's the same diameter as the machine hole, so pushed straight in. No more plastic corrugated dust collecting flexible pipe!
@tabathv18 ай бұрын
Nice workshop
@mattseymour863710 ай бұрын
Been thinking of getting a small sander like this for sharpening hand tools and small wood item sanding. Do you recommend this make and model? Also is it built well and is good quality?
@TalesFromTheTinkerage10 ай бұрын
For small wood item sanding it is absolutely perfect in my opinion. Pretty much all the ones that look like this are made in the same factory with just a few slight differences like styles of knobs, colour and shape of the tables. There's only a small variation in price so just look out for one that suits your pocket and perhaps colour, if that's important to you. I have sharpened with it but I now have a Sorby Pro-edge which is in a different league for that. With the Sealey you would need to make jigs to get consistent angles but it will work. It's a fraction of the price of the Sorby. I hope that helps. Reach out if you have further questions.
@mattseymour863710 ай бұрын
@@TalesFromTheTinkerageThanks for your detailed reply and it sounds like this would come in handy as I have a gardening business and keen on DIY so sharpening small hand tools and small woodworking is my thing. Would you say this is better quality than the other makes in a similar league? Where do you get the spare sanding discs and belts from? How do you install them?
@TalesFromTheTinkerage10 ай бұрын
I've seen a few versions in friends' workshops and they really are much of a muchness. I bought this one because it was the cheapest I could find as I only had a limited budget when I bought it. Belts and discs are easy to find. Most places that sell abrasives will sell them. TBH I use Amazon as I have a Prime account and they'll normally come next day. I've not changed the disc yet, I mostly use the belt, and I think it's adhesive iirc rather than velcro as on a random orbital sander. To change teh belt you take the side off and release the tension. It's screws rather than knobs but it's only a 2 minute job. I've seen one guy who leaves the side off as he changes belts regularly for rough sharpening chisels, it's doable but sketchy. For something like lawn mower blades it would be excellent. Secatuers might be trickier unless they come apart but that's the same for most sharpening systems for them, in my experience. @@mattseymour8637
@reacohn751 Жыл бұрын
Hi. Great vid. Why do you have to do the tweezer part? Just curious. Thx.
@bigstick5278 Жыл бұрын
Don't need to go through all that Octopus screwdriver Hoopla on that HEPA filter cover.. Just pop the front lock up then work the side locks one at a time from under the cover lifting while your prying the cover away.
@catjax888Ай бұрын
Thank you. That's why I'm watching KZfaq videos at 2:15 a.m. I have always cleaned my vacuums. My house is 4100sf, and 2 story. I bought the Dyson DC14 at a pawn shop and had it serviced. The man said it was in good shape, but it would soon need a new filter. I didn't realize it had a "Lifetime" HEPA filter until I was looking where to order one. I received everything in this video. When my husband got to the HEPA filter, he was afraid of breaking the little plastic things. Now I can show him how to do it carefully. I'm hoping to find a video that shows how to clean the entire vacuum. I got the bottom cover that covers the roller, but were having a hell of a time getting the roller out because of the belt. It really needs to be cleaned as well. I'll keep looking. The more I learn, the better I'll know how to take care of it. After I first had it cleaned and serviced, it took me 2 years to find the filters. Now Amazon has them all over the place. Thank you for your video.
@CalculatorObsessed Жыл бұрын
If you like tinkering and have the Model A version of this calculator, you can change the software by altering the jumpers inside, including upgrading it to the Casio fx-991 ES. Casio realised the consequences of this so removed this ability on the B model.
@vincejnr7496 Жыл бұрын
Cheers mate 👍
@annarichards2611 Жыл бұрын
My favourite bit was... "Yeeaahh..rubber glove!" Also, thank you for helping me to fix my tap 😊
@TineBeo Жыл бұрын
sound is desperate..had to turn off
@terencemcculloch3294 Жыл бұрын
A great little saw. Specs and appearance change from time to time when on sale and country to country. I did change the band from 6 x 6tpi to 8 x 14tpi, it gave a cleaner cut. The motor is a little under powered, 250w in my case, so don't push it. One big complaint was the upper bearing at the back of the band was under sized, no way would it support the band, so I fitted a larger one. No big deal for me but average Joe may not know. My 2c worth.
@TalesFromTheTinkerage Жыл бұрын
That's useful input. Thank you!
@usasupra23 Жыл бұрын
Why not change the other third disc filter on the lower right of the machine or is that only the DC14 Animal that has that?
@smacleansdetailing Жыл бұрын
Anyone got a video on how to attatch a 15m universal hose in these ?
@TalesFromTheTinkerage Жыл бұрын
Not that I have seen.
@myjourneyanditsbattles7391 Жыл бұрын
Thank you
@TheNickHorton2 жыл бұрын
You ok? You haven’t updated in ages.
@TalesFromTheTinkerage Жыл бұрын
Sorry about that. The human malware and some family stuff has put making, and making videos particularly, onto a back burner.
@TheNickHorton Жыл бұрын
@@TalesFromTheTinkerage we will be waiting. All the best 👍🏻
@nickbernal79552 жыл бұрын
Handy tip: after you tighten the chuck turn it back 1 click to lock the chuck to prevent bits coming lose
@lynne27742 жыл бұрын
Thank you very helpful
@xandrafy2 жыл бұрын
hi, may i know of you use salted or unsalted butter?
@TalesFromTheTinkerage2 жыл бұрын
That's a good question. Traditionally I'm fairly sure that it would be salted butter but I have only used unsalted butter for the last 30 years.
@neilbuchan14892 жыл бұрын
My hose does not go in that way as the wire is the other way round?
@TalesFromTheTinkerage2 жыл бұрын
That's odd. All the ones I've seen are the same as the one in the video. Are you in the UK?
@neilbuchan14892 жыл бұрын
@@TalesFromTheTinkerage Yeah Aberdeen, it just won’t screw in the way you do it, the metal of the vent goes the other way 🤷🏽♂️ I don’t know if I’m doing it wrong but I’ve tried countless times and different ways but still nothing, I thought the hose was the wrong one but apparently there all universal, my brain is burst 😂🤦🏻♂️
@TalesFromTheTinkerage2 жыл бұрын
@@neilbuchan1489 That's really odd. All the ones I've seen have the wire in the same arrangement as the threads on a screw. I'm all short of suggestions I'm afraid. Other than maybe picking up one from Toolstation/Screwfix to compare, knowing that you can take it back if it doesn't solve things.
@the1951112 жыл бұрын
one thing I do is leave the plug in sink,the plughole attracts screws like a magnet...
@essentialhandyman2 жыл бұрын
I don't know about you Andy but everytime I see the huge workshops in the US have, I get serious workshop envy. Us in the UK are really limited with space. It's so annoying.
@SteveMonk19562 жыл бұрын
Really enjoyed this series, I too have a small shed and like you juggle tools and things around. I found your re-org inspiring and it has given me some ideas on sorting mine out. thank you.
@hpevans90412 жыл бұрын
I love shop tours😀😀😀
@nigelogilvie94502 жыл бұрын
Thank you; saved my bacon. Removing hose to get access.
@TalesFromTheTinkerage2 жыл бұрын
Bacon has to be cared for! I'm glad you found it useful.
@amansur12 жыл бұрын
I have been researching about these vents a bit. Apparently it's best to use metal for longevity and safety against fire
@TalesFromTheTinkerage2 жыл бұрын
I agree that metal would be better on both counts. And in some settings it is a requirement. The PVC hoses are very common in UK households. They are cheap to replace and shouldn't be at risk of fire.
@bukyadevender81752 жыл бұрын
My Casio model fx-991ES which battery 🔋 is suitable and where it is available
@TalesFromTheTinkerage2 жыл бұрын
It uses an LR44 (or G13) which are readily available from hardware stores, supermarkets, Amazon and eBay. Once you replace it you will need to reset the calculator: CLR - ALL - YES. (shift 9, 3, =) Don't skip that part! I hope that helps.
@rossknowles56082 жыл бұрын
those jars screwed under that shelf are an excellent idea!
@TalesFromTheTinkerage2 жыл бұрын
Thank you! I'd like to say it's mine but it's been in use for most of the 20th Century as far as I know.
@rossknowles56082 жыл бұрын
medium agnostic is good
@TalesFromTheTinkerage2 жыл бұрын
Thank you!
@CrudeButEfficient3 жыл бұрын
Working my way through the long watch later list (I guess yours is insanely long as well) and I must say that in general I prefer this style with a video containing all the prompts, rather than having Instagram clogged up with posts every day for a month. Next year I might do something similar.
@johnstanton84993 жыл бұрын
Great idea Thanks ,also if you fold the top over before clipping , stop creepy crawlies from making their home in them
@MZMA853 жыл бұрын
As a Bosch maniac myself, I am pleased to know that you have made a correct choice.
@JohnDHarvey3 жыл бұрын
I'd like to order a Maker's Crêpe, please...
@TalesFromTheTinkerage3 жыл бұрын
Maple syrup or lemon?
@tinkeringrocks3 жыл бұрын
Great waffling! Looking forward to more! Thanks Andy & Jamie!!
@AverageJoesJoinery3 жыл бұрын
Nice one lads! Looking forward to more waffles!! 🧇
@TalesFromTheTinkerage3 жыл бұрын
Thank you Joe. We're in it for the long haul.
@kjellski3 жыл бұрын
Whohooooo - looking forward to see this one in full now :)
@TalesFromTheTinkerage3 жыл бұрын
Thank you my friend.
@TheGrantAlexander3 жыл бұрын
Hey I know those people!
@TalesFromTheTinkerage3 жыл бұрын
We know you too. Hopefully one of the thumbnails will also include your headshot one day.
@RichardMartin3 жыл бұрын
Thanks for that, very enjoyable.
@TalesFromTheTinkerage3 жыл бұрын
Thanks Richard. We're glad you enjoyed it.
@Pricklysauce3 жыл бұрын
Loving the BTS 😃
@TalesFromTheTinkerage3 жыл бұрын
Thanks. It was impromptu but it may happen again.
@InsideAlan3 жыл бұрын
A lower third with guest details on it would probably be useful.
@davebauerart3 жыл бұрын
Makers waffle is live on Tales of Gingrich KZfaq channel.
@AndyBirkeyMaker3 жыл бұрын
Waffleage!
@TalesFromTheTinkerage3 жыл бұрын
You know it!
@TheKnacklersWorkshop3 жыл бұрын
Hello Andy, Sorry I missed your experimenting... Hopefully see you tomorrow... Cheers. Paul,,
@danielmccrory35323 жыл бұрын
Do you think you would have considered ryobi
@JustMightDIY3 жыл бұрын
Great video, and it's good to have you back in action, Andy! I only have on Bosch tool, but it does not disappoint. Thanks for the thorough look at this drill!
@TalesFromTheTinkerage3 жыл бұрын
Thank you and thank you for taking a look. If I had the cash I'd have more Bosch tools.
@MapleTreeStudios3 жыл бұрын
Glad to see you back man !
@TalesFromTheTinkerage3 жыл бұрын
Thank you sir!
@wayward_dom68653 жыл бұрын
Looks like it's a good bit of kit. Something to consider when my Makita 18v packs up eventually. Nice vid Andy 👍