unless you track and race the car then not really worth the cost. Bilstein costs 3x what OEM struts sell for.
@OtterXtra6 күн бұрын
They are $16 more than the OEM
@oneschance8 күн бұрын
Groundhogs Day
@dianedonovan2308 күн бұрын
i have an suv but the tongue needs a 3 inch hole vs 4? Is there an adaptor that will work?
@shutyourlipsbuddy83469 күн бұрын
I love my jetson haze, however nearly a full year of owning I’ve had issues with: the break pads & squeaking(needs a quick replacement if you ride consistently for sure), the charging box light doesn’t light up the same(not sure if it’s going to go out or what?? Kinda nervous lol) just recently the throttle handle has sprung off & by the looks of it other have had this issues & going through soldering & whatnot just isn’t up my alley. Also it is not very easy to fold up as even though I’ve been working out my arms & back good lord that is such an awkward design for a fold. At this point I’m debating if I’d rather get a regular bike because a really good long lasting ebike is well around $1k+. However this bike is great for an average rider who goes out every now and then on or off the trail. It’s a tough cookie for sure & has seen a handful of falls & still rides well. Just with the throttle being jacked up I’m sadly looking at taking er back & or selling to someone who could fix er up.
@DarkFeedFPV16 күн бұрын
Sx derailleur is not usable in trail and downhill. I broke mine in 3 months of use cause clutch is crap But for xc and mtb hardtail could be worth it
@mcplutt17 күн бұрын
The SX plastic parts will break.
@ericbeech265218 күн бұрын
I went from wtb ranger 2.6 to maxxis rekon 2.6. I absolutely thought that they put 2.4's on by mistake. Nope, 2.6.
@RafaelSantos-ov1jx18 күн бұрын
Good explanation
@boogiedownbronx7322 күн бұрын
currently trying it as a rear tire since i had a new one laying around
@nyreppin124 күн бұрын
Bro i picked up a set of XT brakes from AliExpress and tried to tell people on Reddit about it and got negative karma LMAOOO. I get why they're be hesitant but i posted pics and all.. 🤷
@javierdiaz784024 күн бұрын
Thank you for this very informative video. I just bought one, pretty much identical to yours. I also, thought it was broken because it would not accelerate. But watching your video, i realized that it requires a bit of an initial push. Thank you, i was ready to return it.
@ADVRider7825 күн бұрын
I put 100km on my DB8 and so far they really suck. I will try the pads you recommend. Thanks for the video!
@OtterXtra24 күн бұрын
The most aggressive Ebike blue ceramic ones are the only ones that do anything
@AnothonyBozzi26 күн бұрын
I got one it’s so slow and Loses power so fast
@DavidParathyras28 күн бұрын
I bought this pump today and no problem pumping my shock and fork. First you weren't using the correct mode that has on the bottom and second you can put your palm against the top of the shock with your left hand preventing it from going anywhere. You don't need to grab it with your whole palm, you just need to block its movement, thus generating a pumping force. You won a dislike mate. Cheers.
@OtterXtra28 күн бұрын
@@DavidParathyrasit was in the right setting high pressure, try pump that thing past 200 psi.
@DavidParathyras18 күн бұрын
@@OtterXtra i did
@jhunmonacoАй бұрын
I have question this front shock absorber Bilstien B6 this is a Monotube shock absorber.
@MrTurbo87lxАй бұрын
Nope not on the highlander application.
@ReignT5Ай бұрын
Great video, but I feel like the 360 camera doesn't do any justice to the bike and the ride. Also might wanna list the price of what you're reviewing near the end.
@OtterXtraАй бұрын
Thanks for feedback. Action camera’s are pretty lame any ideas to improve
@catonabike2774Ай бұрын
Thank you so much for posting this video. I got exactly the information I need so I can do it safely.
@carljosephmallari8003Ай бұрын
so i can use other shimano chain on cues cassette?
@Phil-qz6ocАй бұрын
I use a HG chain on my cues setup. Never even knew there was a LG chain!
@hugosantana7253Ай бұрын
Yes. The Linkglide tech is in the cassette.
@OtterXtraАй бұрын
The shifter has a special pull ratio non compatible with anything else , cassette has larger teeth for this ratio, the link glide rear mech is unknown area. Any chain fits
@mscm4592Ай бұрын
It is hilarious how rack reviewers drive over bumps and the bikes flop all over place and they still say "absolutely no wobble and are the most secure of any rack made". Hilarious.
@andresc89Ай бұрын
Thank you for the review. I ordered it and it arrived today. Just wanted to point out that it it looks like you installed the inner and outer rack incorrectly. I made the same mistake and after looking at the cover of the manual, I realized I had put the inner rack as the outer rack and vice versa. Two quick references are 1) that the company logo is on the outer rack and should be facing out or away from the car (if you look at the footage when you're testing the rack on different cars, the company logo is facing the car), and 2) the arm of the outer rack should be over the handle when not in use. It looks like that it still does the job the way you installed it but just wanted to make you aware in case that change makes a difference with the potential clearance issue with some vehicles. Thanks again for your video and review.
@OtterXtraАй бұрын
Totally right. I didn’t want to in jolt it later like 2 days later. Not sure if would fit better it clears the RAV4 barely. Just more the Tesla
@Tvmanfanmade3.0Ай бұрын
How to find a key for it my got locked 🔐 and I can’t use it anymore?
@brokenlegzАй бұрын
You’re right about going up one size. But the previous 2021 pant I had to go down a size. And I ordered these the same. Yep, way too small. Why fox why!
@RC-fp1tlАй бұрын
Cool! I might have to try this for my winter bike If i has the slow return, I’d tear it down and replace the seals 😁
@RichM3215Ай бұрын
Thanks for your review. I just ordered this rack based on the reviews. I now see in your and other videos the potential bumper and wheel holder clearance issue when folded. I guess this depend on how far the rack goes into the receiver hitch? If there is a clearance problem i guess i can drill another hole in the hitch to bring the rack out an inch or so. Your thoughts?
@OtterXtraАй бұрын
No you cannot it has special lock system. It’s a solid rack if it fits.
@IsraelMagalitАй бұрын
My DHF 2.5WT measures 2.5" knob-to-knob
@Alex-oy6wb2 ай бұрын
Why don’t you like fidlock?
@alexnice98472 ай бұрын
Thanks for your vid. Could you tell me at which positions the spacers should be placed? I think I might got them wrong by replacing them.
@luannjeanette6112 ай бұрын
Jenson?
@johnso23992 ай бұрын
Try BACK-BONE C mount adaptor, it will try your 1R into Super 16 Retro machine.
@Mike0193AzulАй бұрын
I'm considering doing so. Has it been worth it for you? Looks good and is easy to use?
@johnclyde84562 ай бұрын
dont push as hard as u can lmao u will ruin the seals. also maybe put a little more oil in so u can get a full bleed instead of a "half bleed"?
@7SEANYBOY2 ай бұрын
Great video, thanks. Did you ever figure out what the extra bolt was on the bottom of the mounting tray, the one sticking out in the center?
@OtterXtra2 ай бұрын
Didn’t
@7SEANYBOY2 ай бұрын
@@OtterXtra haha, so strange, I emailed them. No reponse, it's making my OCD go crazy.
@OtterXtra28 күн бұрын
Same they discontinued bike products most likely no money in bikes
@OtterXtra2 ай бұрын
bike rack in video amzn.to/3yMScf5
@willon502 ай бұрын
I got it a couple of days ago, I like it, but it's too heavy, probably twice the wight of a kuat or rocky mounts, however the quality is great.
@OtterXtra2 ай бұрын
its cheap
@willon502 ай бұрын
@@OtterXtra indeed... it is.
@melrobinson69192 ай бұрын
Do you have the Kuat model that is subject to recall?
@dans94632 ай бұрын
Can you take the bike on the bus or Uber? Do they allow it?
@ChaseDaBagWitNoLegs2 ай бұрын
Yes
@rupedog2 ай бұрын
Blasting the oil in hard will cause micro bubbles! Makes oil effervesce. Firm consistent pressure.
@rickbarg39802 ай бұрын
Not the original Drill Brush ,a knock off they’ll fall apart
@ThunderStruckMTB2 ай бұрын
Do this on a Shimano brake and you WILL tear the delicate diaphragm in the lever.
@OtterXtra2 ай бұрын
Did it on wondering bite point XT fixed it.
2 ай бұрын
great video thanks
@KotakMeister2 ай бұрын
I've been thinking of doing exactly this, with 2 syringes, instead of pushing and pulling with one. Now that i see it in practice, I'm gonna do this soon on my Magura...man are they a pain to bleed 😑
@Atxcmtb2 ай бұрын
While this technique seems like it is more applicable for everything, SRAM’s pressurization method is FAR more effective and necessary for getting the higher end brakes to perform properly without blowing the master cylinder!
@OtterXtra2 ай бұрын
If the master blows out from a tiny syringe pressure, then it is already bad. Maven’s are plagued by wondering bite point. Every step of the video pulled bubbles out, 2 less steps than Sram official. I couldn’t even follow what park tool did
@Atxcmtb2 ай бұрын
@@OtterXtra I disagree with the issue on the Mavens. After setting up 5-10 of them, i feel that it just takes a good pressurization at the lever, and a proper negative pull to remove any air. While some of the techs i work with have blown a master cylinder on fresh brakesets, i’ve seen it happen most if you pull a vacuum too hard or try to pressurize the caliper. Regardless, it’s still important to de-gas any DOT fluid because it stores air naturally.
@OtterXtra2 ай бұрын
@@AtxcmtbIt is all about helping people. The Maven wondering bite point has about 5 problems area's people are reporting on, the levers are introducing air to the system, I am guessing Sram's crap manufacturing. From my home mechanic experience the more expensive the brake the harder it is to bleed, MT401 takes about 10 seconds
@chrisbrookshire8612 ай бұрын
My man said "Air bubbles you will GET OUT OF THESE BRAKES AMEN". For all the people saying you didn't "invent" anything I don't care. Video was straight forward and now I know how to bleed my brakes so thank you.
@FranticGuitar882 ай бұрын
I find this video to be 1:1 copy of official SRAM brake bleed, except it has much more unnecessary words and SRAM is mispronounced as "Shhhram".
@OtterXtra2 ай бұрын
First of all, you have obviously never bled Sram mineral brakes. 2nd it is not a copy 3rd Watch the end of the video to see why it is not s-ram is the proper way to say it right?
@rupedog2 ай бұрын
Pretty much how u bleed sram dot brakes, but they use a vacuum technique to get those micro bubbles out way better than this technique
@rupedog2 ай бұрын
From the SRAM website... SRAM is an acronym comprising the names of its founders. Thus it's SRAM, not s-ram or scchhram. 🤟
@roddas262 ай бұрын
You didn't "invent" anything.😂
@OtterXtra2 ай бұрын
Watch the end
@roddas262 ай бұрын
@@OtterXtra watched the entire clip 👍
@OtterXtra2 ай бұрын
Sram park tool wants you to pressurize the system with the syringe, just blast the the fluid up cures the final bubless
@kevinmoorejr.94182 ай бұрын
He invented doing something we've been doing since day 1 of hyro disc brakes.
@OtterXtra2 ай бұрын
@@kevinmoorejr.9418 dog it’s a hybrid bleed of seam and Shimano
@LlenadeMalo2 ай бұрын
I have wondered about something similar for Shimano brakes. The technique Park Tools says to do has dozens of steps. I don’t understand why we cannot use two syringes to push and pull the fluid. Doesn’t it seem like you can build a very pump with low power to attach to the lever and push the fluid to the caliper and out to be disposed. That way you can close the caliper bleed port with some pressure.
@ASAP25252 ай бұрын
Hayes actually recommends you do a push-pull method
@digital2k62 ай бұрын
Interesting technique. ... There is no H is SRAM. It's not Shh-ram. It's Sss-ram.
@OtterXtra2 ай бұрын
s-Ram
@rupedog2 ай бұрын
@@OtterXtrano...totally incorrect. SRAM is an acronym comprising the names of its founders. Thus it cannot be s-ram.... It wasn't one person called Simon and another called 'Ram' 😂
@dbhrgdb36382 ай бұрын
Hmm..., I can attest to this this, but mixing the Dot soaked old with the dry new on srams, Not sure about that.
@ouloulil30152 ай бұрын
Bonjour quel référence la courroie c’est bien le 2.0 150cv hybride ?
@MarcusGillaspia3 ай бұрын
2 years in Bentonville on Cush core zero issues. Got a new bike, shop only had 27.5” in tannus. I bought it. First ride 45 min in flat tire and dented rim. 2 rides later flat again. Tannus is junk!
@The_G3 ай бұрын
Thanks for the tip on pressing down towards the downtube to get the battery screw back in. Saved a lot of swearing 👍