Thanks for the vid. NOT exactly a customer serviceable design. Sure, most anyone who is a customer of this winch and offroad products is likely to have little problem swapping batteries. There is the outside chance that you can pinch a wire or break the solder. Maybe even gooping up the insides with some mud, grease, beer, BBQ sauce, or most probably, tears, rendering the remote unusable. However, needing battery service, the remote should have been better engineered with a battery cover. Preferably a waterproof cover that is toolless, tethered and a single screw/bolt that doesn't fall out into the mud in the middle of the night. Something similar to what is seen on some hand-held radios and GPS units. Hoping you can come up with a better designed remote that can be retro-fitted to winches you've already sold. The light is nice to have.
@Saovang90-5596 күн бұрын
What size is that 180 awning on that Crosstrek?
@Kubanb36 күн бұрын
What is the weight?
@Jonathan-gz6tu2 күн бұрын
37.5 and 46.3 lbs
@goku62886 күн бұрын
I wish North America would get the 70 series Toyota Land Cruiser truck tbh
@MidAtlanticTV6 күн бұрын
Well done.
@TheRipper779 күн бұрын
In Texas who will do this job?
@Ironman4x4America9 күн бұрын
ironman4x4america.com/store-locator/
@MikeMerzke12 күн бұрын
Any word on when this will be in stock?
@mjfamgo656314 күн бұрын
Also This video is not the most helpful hanging the bumper has no instructions to what screws…. Nor does he demonstrate how many and where to screw them in for a beginner it can be quit intimidating despite that it’s self explanatory.
@mjfamgo656314 күн бұрын
It’s not difficult I did it without the video and just discovered it. I have a LC 100 1998. if the car is black no need for paint. Also if you are not going to use the bumper again you can just unscrew it from bottom on LC and quickly remove it without having to take any lights or gram off from top. The pins from top are plastic and won’t matter if you rip them out. Overall great look on LC not so much on the Lexus to be honest. I would rewire on LC for the lights. Instructions are garbage except this video. Would have saved me some time had I searched it up. Also if you never done anything handy do not try this have a friend or someone help you who knows what they are doing trust me just trying to save you some time. He makes it look easy because he has installed thousands of these. Also on an LC from the 90’s expect nothing to unscrew easily. I had to use torch and penetrating oil on every screw so be prepared for agony and that’s why I said have someone that knows what they doing if you have not done it before. Also must have impact wrench to not mess up the screws.
@daalarmguy15 күн бұрын
Wish they would release this bumper again....
@duanewood530317 күн бұрын
I bought one of these bumpers after we hit a deer and destroyed the plastic bumper. This bumper is built very well. I highly recommend it.
@nelsonzumosa924819 күн бұрын
Does the suspension kit for LC200 fit on Land Cruiser 100 ?
@hewlett26019 күн бұрын
According to the website this bumper isn't compatible with the Rebel trim, what is different on the Rebel
@derrickwhite903819 күн бұрын
I think I saw your car at overland expo pnw, can you do a video on your tent I have a Crosstrek as well
@Ironman4x4America16 күн бұрын
Video coming soon!
@jkroemer268519 күн бұрын
Any chance these will work on Prerunner model? Thx in advance
@alexxu300420 күн бұрын
What were the spring rate on these btw, I purchased them a year ago and at the time there weren't weight options
@michaelp647920 күн бұрын
Solid company and always a good price point, anyone getting into overlanding should give Ironman a look for equipment.
@Ironman4x4America19 күн бұрын
Thank you!
@edwardolopez336822 күн бұрын
Wish you covered the clocking portion
@Ironman4x4America21 күн бұрын
kzfaq.info/get/bejne/e7WXlsiLtrbIdac.html
@edwardolopez336821 күн бұрын
@@Ironman4x4America bruh, we’re talking about the torsion bars lol
@eodninja622 күн бұрын
no love for the 1st gen XV huh?
@alexelkins394122 күн бұрын
Is it possible to mount this tent so that it opens to the driver side? The awning I purchased is for the passenger side.
@AlbrightAllnite258923 күн бұрын
I really love the stubby design. Need one for the 4th gen 4runner.
@richardhapke927524 күн бұрын
Now can you do a video for the room and floor?
@tristencochran337425 күн бұрын
Since these aren't true rock sliders how hard od a impact can they take, i dont plan of smashing them but figure they'll probably bump or suff up against a rock
@victorpapaavp27 күн бұрын
When I did my suspension, for the driver's side rear bolt I just loosened the fuel tank straps and dropped it out of the way enough that I could get a hand in there with a ratchet. I had a transmission jack handy for it as well, made it super easy. It might take some doing/stacking 4x4s if you're doing it in the driveway, and you'll probably need a floor jack, but let's be honest, if you're attempting this in your driveway, you've got a way to jack your vehicle up relatively easily.
@johnsteed26527 күн бұрын
I just replaced the air bags with coils on my GX470. You don't need all of that puck stuff- just the springs. Much better ride.
@4535goldenage28 күн бұрын
Does this maintain factory ride quality? Does it make the truck ride stiff?
@h2oloveАй бұрын
I still think this is a good instructional video. However....I just finished installing these on my 2019 Outback. The front struts were easy, minus the absence of the alignment stamp mark. The back...a whole different story. The rear is quite different from the video. I now realize they missed key steps when they edited the video or even filmed them out of sequence.. Also, the differences between the Outback and Crosstrek are bigger than mentioned in the video. I couldn't have finished the install without this video, but it took some serious problem solving to complete the install on the rear. OH! And they are shipping the struts with SAE hardware. So the helpful tips on socket sizes are all off.
@jcar2412Ай бұрын
I bought leaf spring kit from them, and one of the U-bolt boxes was empty. I didnt realize i was missing them till my truck was taken apart. Called them figured they would just over night me another box like any other company would. Instead i have to take pics to prove i dont have something(how can i do that?). Truck is currently undrivable b/c old ubolts are way too long to get on. They have to review pics and will ship it in a few days if they are satifisied with pics. The dude that works there(John) told me to just go buy some from a local shop. WTF! Use anybody else besides them. If you order goes smoothly they are probably fine, but probably are useless with warranty claims.
@jcar2412Ай бұрын
I bought leaf spring kit from them, and one of the U-bolt boxes was empty. I didnt realize i was missing them till my truck was taken apart. Called them figured they would just over night me another box like any other company would. Instead i have to take pics to prove i dont have something(how can i do that?). Truck is currently undrivable b/c old ubolts are way too long to get on. They have to review pics and will ship it in a few days if they are satifisied with pics. The dude that works there(John) told me to just go buy some from a local shop. WTF! Use anybody else besides them. If you order goes smoothly they are probably fine, but probably are useless with warranty claims.
@jcar2412Ай бұрын
I bought leaf spring kit from them, and one of the U-bolt boxes was empty. I didnt realize i was missing them till my truck was taken apart. Called them figured they would just over night me another box like any other company would. Instead i have to take pics to prove i dont have something(how can i do that?). Truck is currently undrivable b/c old ubolts are way too long to get on. They have to review pics and will ship it in a few days if they are satifisied with pics. The dude that works there(John) told me to just go buy some from a local shop. WTF! Use anybody else besides them. If you order goes smoothly they are probably fine, but probably are useless with warranty claims.
@jcar2412Ай бұрын
I bought leaf spring kit from them, and one of the U-bolt boxes was empty. I didnt realize i was missing them till my truck was taken apart. Called them figured they would just over night me another box like any other company would. Instead i have to take pics to prove i dont have something(how can i do that?). Truck is currently undrivable b/c old ubolts are way too long to get on. They have to review pics and will ship it in a few days if they are satifisied with pics. The dude that works there(John) told me to just go buy some from a local shop. WTF! Use anybody else besides them. If you order goes smoothly they are probably fine, but probably are useless with warranty claims.
@jcar2412Ай бұрын
I bought leaf spring kit from them, and one of the U-bolt boxes was empty. I didnt realize i was missing them till my truck was taken apart. Called them figured they would just over night me another box like any other company would. Instead i have to take pics to prove i dont have something(how can i do that?). Truck is currently undrivable b/c old ubolts are way too long to get on. They have to review pics and will ship it in a few days if they are satifisied with pics. The dude that works there(John) told me to just go buy some from a local shop. WTF! Use anybody else besides them. If you order goes smoothly they are probably fine, but probably are useless with warranty claims.
@jcar2412Ай бұрын
I bought leaf spring kit from them, and one of the U-bolt boxes was empty. I didnt realize i was missing them till my truck was taken apart. Called them figured they would just over night me another box like any other company would. Instead i have to take pics to prove i dont have something(how can i do that?). Truck is currently undrivable b/c old ubolts are way too long to get on. They have to review pics and will ship it in a few days if they are satifisied with pics. The dude that works there(John) told me to just go buy some from a local shop. WTF! Use anybody else besides them. If you order goes smoothly they are probably fine, but probably are useless with warranty claims.
@jcar2412Ай бұрын
I bought leaf spring kit from them, and one of the U-bolt boxes was empty. I didnt realize i was missing them till my truck was taken apart. Called them figured they would just over night me another box like any other company would. Instead i have to take pics to prove i dont have something(how can i do that?). Truck is currently undrivable b/c old ubolts are way too long to get on. They have to review pics and will ship it in a few days if they are satifisied with pics. The dude that works there(John) told me to just go buy some from a local shop. WTF! Use anybody else besides them. If you order goes smoothly they are probably fine, but probably are useless with warranty claims.
@jcar2412Ай бұрын
I bought leaf spring kit from them, and one of the U-bolt boxes was empty. I didnt realize i was missing them till my truck was taken apart. Called them figured they would just over night me another box like any other company would. Instead i have to take pics to prove i dont have something(how can i do that?). Truck is currently undrivable b/c old ubolts are way too long to get on. They have to review pics and will ship it in a few days if they are satifisied with pics. The dude that works there(John) told me to just go buy some from a local shop. WTF! Use anybody else besides them. If you order goes smoothly they are probably fine, but probably are useless with warranty claims.
@jcar2412Ай бұрын
I bought leaf spring kit from them, and one of the U-bolt boxes was empty. I didnt realize i was missing them till my truck was taken apart. Called them figured they would just over night me another box like any other company would. Instead i have to take pics to prove i dont have something(how can i do that?). Truck is currently undrivable b/c old ubolts are way too long to get on. They have to review pics and will ship it in a few days if they are satifisied with pics. The dude that works there(John) told me to just go buy some from a local shop. WTF! Use anybody else besides them. If you order goes smoothly they are probably fine, but probably are useless with warranty claims.
@h2oloveАй бұрын
My new shocks don’t have the mark stamped in it for aligning the chamber bolt. What should I align with the marks?
@markalvarez5037Ай бұрын
Could you please let me know what wheels these are on the black RAV4 and tire specs
@czr323Ай бұрын
I just received your new Delta Wing 180 canopy. Simple and beautiful new logo.
@Ironman4x4AmericaАй бұрын
Thank you!
@sskirv5071Ай бұрын
I actually love the green as well. Looks great on my Tacoma
@boneskull4207Ай бұрын
I hope they don't loose the green Martian man! I kind of like the logo as it is. Excited to hear whats up though!
@DonaManeАй бұрын
will this work with any winch? I've a 2019 JLU Sport! The bumpers looked so brutal though!
@lassiterdominguez2879Ай бұрын
Didnt show the results😂😂😂. And i bet its like 4k$.😂😂. Why would i dump my oem shocks for those? My spine was hurting just looking at those springs.😂😂
@patpathealy1243Ай бұрын
why don't you show the sway bar relocation bracket in the install video. I can't even find instructions on the website.
@keftonbrown1460Ай бұрын
I have a prinsu roof rack. Do you recommend the L brackets or get prinsus awning mounts. And do you recommend 3 mounts for the 8ft
@Ironman4x4AmericaАй бұрын
The Prinsu awning brackets will make for a definite fit. Otherwise, the L brackets will work with a spacer to clear the Prinsu side rails. 2 brackets are necessary for the 8ft awning.
@Thisthat1234Ай бұрын
If only it was in stock
@UnprofessionalTacticsАй бұрын
We need the front bumper video for RAID FRONT BUMPER KIT SUITED FOR 2019-2021 CHEVROLET SILVERADO 1500
@diegosean1109Ай бұрын
On a 3.5 lift can you use 17in or 18in wheels on 35’s?