Thanks for the video with the parameters! Two questions if you don't mind # 1) what lens was used? 2) Do you have a more expanded color palette?...
@MactronlaserSunsa2 ай бұрын
The lens is F=160 /110x110mm , JPT Mopa 30w laser source. If you need more color , could change the Frequency and Q-pulse accordingly.
@HackOFF2 ай бұрын
@@MactronlaserSunsa Thanks for the quick response! I have a Mopa M7 30W, with an F-254 lens (175X175MM) and the colors didn’t come out even close :( Could you help me figure out how to generate a color table?
@MactronlaserSunsa2 ай бұрын
I see . As Mopa, a smaller lens is better. Also , with different machines and different material, the effect will be different. If you need detailed training , I can recommend you to check masters.lasereverything.net/
@niltonmalaquias21603 ай бұрын
Please is your system able to engrave mutex part nymber including QRCODE for a production line engraving PVC plastic about 10.000 pieces a day?
@elektorperu8 ай бұрын
support in windows XP32
@MactronlaserSunsa8 ай бұрын
yes, this is the old version
@Mantasha_oficial8 ай бұрын
How many price of this machine pls detail me
@MactronlaserSunsa8 ай бұрын
Around 18000- 80000USD , depends on the actual request.
@Mantasha_oficial8 ай бұрын
@@MactronlaserSunsa thank you for that
@benjaminperezpadillagarcia60379 ай бұрын
WHAT IS THE COST TO MEXICO
@MactronlaserSunsa9 ай бұрын
Depends on the power . my mail is [email protected] , whatsapp 0086-13192054103 , you can contact me for details .
@1978zumimoraes9 ай бұрын
Hola. Necesito comprar la maquina para probarlo? Me pide numero de serie. Gracias
@MactronlaserSunsa9 ай бұрын
Sí, a diferencia de EZCAD 2.0, EZCAD 3.0 debe funcionar con la tarjeta controladora y no puede abrirse como demostración.
@CelalettinRodoslu10 ай бұрын
How can I can mark 3mm to 500mm long filled square. It says exceed limit area. 30w fiber 115mm lens. And thank you for the video.
@MactronlaserSunsa10 ай бұрын
You could try to put the vector under the head ,not but in the central
@parveengupta912110 ай бұрын
Please send rate&adress
@MactronlaserSunsa10 ай бұрын
What do you mean? Email address?
@MactronlaserSunsa10 ай бұрын
What do you mean? Email address?
@rgcrowman318810 ай бұрын
So what settings do you use if you have a manual tower, what about all the other PARAMETER SETTINGS ?
@MactronlaserSunsa10 ай бұрын
please check the description, point 9
@danielwharrison10 ай бұрын
Is this a 3D laser?
@MactronlaserSunsa10 ай бұрын
yes, this Uv 5w 3D, machine model is MT-UV5-3D
@user-oh1lc1uf6p11 ай бұрын
Could you tell me the setting to mark black on alumina and Galvanized sheet, please?
@MactronlaserSunsa10 ай бұрын
Marking on SS or oxygen aluminum can be pure black. With JPT 60w laser source. material is stainless. Power, Frequency, Speed, Q-pulse Blue : 70%, 300, 1000, 6ns Red: 75%, 300, 1000, 6ns Gold: 80%, 200, 1000, 6ns
@dwarkanathnagwekar5349 Жыл бұрын
What will be this laser machine cost? Specification òf machine please Thank you
@MactronlaserSunsa Жыл бұрын
what is your mail address? or Whatsapp number? we will talk the specifications and price.
are you using the same filler rod it comes with to wild this aluminum?.
@MactronlaserSunsa Жыл бұрын
Yes, of course. 1.0mm diameter.
@rgcrowman3188 Жыл бұрын
Would you be so kind as to tell me how to make the red light stay more continuous, it only lights up a piece at a time and I can't align my work properly
@MactronlaserSunsa Жыл бұрын
You can set on the software , here is the sequence : Paramerter(F3) - Other - Red light pointer - Enable continuous mark mode
@rgcrowman3188 Жыл бұрын
Mactron made good on their machine, It was a misprint from the factory and they showed me where to check on the machine to make sure I got what I ordered, Thank you Mactron
@MactronlaserSunsa Жыл бұрын
glad to know that you are satisfied with the machine
@AmrZenhom-wc4bo Жыл бұрын
i have fatal error always shown when i press start to print. how to solve?
The machine can do it . can tell me your mail address ? or Whatsapp ? we could quote details .
@user-xg5ne5kd9b2 жыл бұрын
Бу апарад нечипул
@user-xg5ne5kd9b2 жыл бұрын
Эта аппарат сколка тисичи
@MactronlaserSunsa2 жыл бұрын
Зависит от мощности. Какой у вас материал и толщина?
@charleswilliams81972 жыл бұрын
This is badass .⚡🙏😎🙏⚡
@MactronlaserSunsa2 жыл бұрын
useful or not ?
@paulcourtney2556 ай бұрын
Fine out more
@paulcourtney2556 ай бұрын
Fine out more
@paulcourtney2556 ай бұрын
Fine out more
@user-mohammed2 жыл бұрын
ههههه تعريف الفلاش على الحاسبه
@MactronlaserSunsa2 жыл бұрын
yes, this is just part of it .
@use.3212 жыл бұрын
what is this solaring machine name. and company name of this machine, THX
@MactronlaserSunsa2 жыл бұрын
1. The welding wire material is stainless , 1mm diameter. 2. Name: handheld laser welding machine . 3. company name is MACTRON. www.mactron-tech.com
@user-go4hr3om1m2 жыл бұрын
Што за хрень такая интересная..?
@MactronlaserSunsa2 жыл бұрын
Это ручной лазерный сварочный аппарат. Сварка металлических материалов. Узнайте больше , следите за мной на Facebook : facebook.com/groups/laserweldingsolutiuon
@user-eg1ij3fe1m2 жыл бұрын
Mactron 👍👍👍
@MactronlaserSunsa2 жыл бұрын
thank you
@javedanver62592 жыл бұрын
Sir ji kya price hai iss machine ka and instalment main payment ho sakti hai please reply
@MactronlaserSunsa2 жыл бұрын
Hello , sir , this depends on your requst on power and working area . Tell me your details plesae .
@gilarenas53852 жыл бұрын
how much ?
@MactronlaserSunsa2 жыл бұрын
depends on the power. Price differs from 8000-20000USD.
@MactronlaserSunsa2 жыл бұрын
around 8000-20000USD.
@shrirammokashi97782 жыл бұрын
Price
@MactronlaserSunsa2 жыл бұрын
Depends on your request . Around 5000 - 20000 USD
@victorbrown30322 жыл бұрын
Sound? I get a couple music notes then silence...
@MactronlaserSunsa2 жыл бұрын
Will updating the sounds in the new video .
@rajorajo33722 жыл бұрын
Hlo
@MactronlaserSunsa2 жыл бұрын
hello
@cleitonhenrique8692 жыл бұрын
''CAN NOT FIND DONGLE! SOFTWARE WILL WORK AT DEMO STATE.'' HELP ME PLEASE
@MactronlaserSunsa2 жыл бұрын
You need to install the driver , please check : kzfaq.info/get/bejne/pJuJerxh3LXLeWg.html
@user-eg1ij3fe1m3 жыл бұрын
Good work👍
@MactronlaserSunsa3 жыл бұрын
Thanks.
@dixitdhankar25593 жыл бұрын
What to do ? If laser is giving only pointer and marking on only single point
@MactronlaserSunsa3 жыл бұрын
there are two heads , each head mark one position . if you have customized service , please send detail request to [email protected]
@calvinkorver27673 жыл бұрын
2:52 Is that folder for lang technik?
@MactronlaserSunsa3 жыл бұрын
Delete the old version, if you computer don't have before , can ignor this step .
@bilalahmad31483 жыл бұрын
How to print 4 line in moving objects on conveyor please give setting info
@emporiograficovzlavalencia32833 жыл бұрын
Price ?
@MactronlaserSunsa3 жыл бұрын
2000-5000USD . Depends on the request . You can send your request to my mail [email protected]