Do you think an T-Motor AM116 ESC drive this motor ? First of all, I have it in hand... Second, it has a AMLink for telemetry which is pretty usefull... On the other hand, what is your combined flight time with a single 6S 6000 mah pack ?
@djdjm6002 күн бұрын
@@3dholicpilot522 AM116 will be too light for this motor. You will need 150A esc. I have 5min 3D flight with Lipo a 20%
@3dholicpilot5222 күн бұрын
@@djdjm600got it... My main objective by searching a way for AM116 is the telemetry which I am quite happy with my AM600 setup on my Laser 60"... Any 150 AMP esc with telemetry suggestion ?
@onedisser14 күн бұрын
Supercooles Video!
@yohannz229822 күн бұрын
Magnifique video 😍 ! m'accordez vous l'utilisation ed quelque passage de cette video pour l'afficher sur un ecrant led ? en rajoutant votre nom sur la video dans un angle evidement
@f5dspeedflyerАй бұрын
Additional Question Frederic, do you use a separat battery for your Receiver & Servo (2S) or do you use the BEC of the Hobbywing ESC. Thank you very much...
@djdjm600Ай бұрын
Only BEC from ESC Hobbywing 👍
@f5dspeedflyerАй бұрын
Hi Frederic, could you tell me th take off weight of your Laser please? I have build up the latest Version (74") with 8S (SLS 5000Mah/40C) and the same Dualsyk motor but with 280KV, with Jeti Mezon 130 lite (Falcon 20x10) and the plane has a take off weight of 5350g... (seems a littel too heavy for me...) thx a lot br
@djdjm600Ай бұрын
Look normal, I think mine is near 5500g.
@PlayHouseBerlinАй бұрын
Hello Frederic, great video - great flying!!! I have exactly the same airplane and struggle with CG and sudden tipping. Can you please share your CG please. Thx
@djdjm600Ай бұрын
Thanks ! I haven't measured CG location sorry. In inverted flight, I use a little elevator compensation, it's my tune.
@PlayHouseBerlinАй бұрын
Thx for the answer. I will test it
@fliphsie4763Ай бұрын
Hey the first powerfull 6s setup im seeing, how heavy is the plane? And what flight time do you get?
@djdjm600Ай бұрын
5.5Kg and 5min 😉👍
@onclefly8450Ай бұрын
Super Fred
@djdjm600Ай бұрын
Merci ;-)
@jadelfpv38392 ай бұрын
Fantasticos vuelos junto a los compañeros veleristas del club . Ese tipo de filmaciones son apasionantes .😍👌
@djdjm6002 ай бұрын
Muchas gracias 😉
@TheFlyovercloud2 ай бұрын
Bravo , io volo tutto originale 5s con elica 6x6 e tu che elica usi?
@fabstube23922 ай бұрын
excellent!!!
@djdjm6002 ай бұрын
Merci 🙏
@65TASSO2 ай бұрын
quelle chouette activité. Merci fred
@djdjm6002 ай бұрын
Merci à toi 👍
@SERIALPALL2 ай бұрын
Magnifique Fred, de belles images comme d'habitude 😉
@djdjm6002 ай бұрын
Thanks bro
@huginn_visuals2 ай бұрын
Regal
@djdjm6002 ай бұрын
Merci Boo
@totobonno31972 ай бұрын
Sympa la vidéo.....👍
@djdjm6002 ай бұрын
Merci ;-)
@przemopgx2 ай бұрын
CooL
@djdjm6002 ай бұрын
Yes!
@axelcazabat71542 ай бұрын
Wow! Excelent edition!! 😮😮
@flipfpv3 ай бұрын
Nice! Any plans to FPV that thing? That would be awesome.
@djdjm6003 ай бұрын
Thanks, not in FPV for moment ;-)
@aririnne58053 ай бұрын
Hi, did you make that engine clamp yourself or is it available for purchase somewhere?
@djdjm6003 ай бұрын
Hi, it's homemade clamp, I couldn't find it it to purchase...
@F16freak3 ай бұрын
Very nice work
@djdjm6003 ай бұрын
Thanks !
@nelrob013 ай бұрын
Very impressive!!
@djdjm6003 ай бұрын
Thanks 😊
@bigdataacfpv97003 ай бұрын
Tu m'as fait rever mon Fred, Merci a toi ! jspr que tout ce passe bien depuis le temps
@djdjm6003 ай бұрын
Yoooo, nickel et toi ?
@x8n17203 ай бұрын
nice flown drone footage
@Martin_OneWing3 ай бұрын
Amazing Video for an amazing model, love it🤩
@djdjm6003 ай бұрын
Thanks my friend !
@tonios20003 ай бұрын
Salut ;) Je viens de finir mon Minivec full Carbon, mon poids tout fini est de 1425g centré. A quel poids sort tu le tiens ? J'ai par contre un problème d'alignement des ailerons/flaps avec les bouts d'ailes... En effet si j'alligne les flaps/ailerons avec les bouts d'ailes, j'ai un décalage de quelques millimètres avec les karmans vers le bas et vice versa si j'aligne les flaps/alerons avec les karmans j'ai les ailerons qui sont decalés vers le haut... Du coup un doute si se sont les karmans qui sont mal alignés ou si les 2 bouts d'ailes sont vrillés... Merci ;) Antoine (62)
@djdjm6003 ай бұрын
Salut, je ne sais pas quel poids fait le mien mais c'est une version fibre et je rajoute souvent 200g de ballast. Pour profiter au max du minivec, il faut une bonne dynamique et du ballast. Une fois trimé, tu ne devrais pas ressentir le vrillage probablement de tes gouvernes, peut être tu peux corriger ou atténuer la chose en stockant les gouvernes avec une contrainte opposée au défaut...
@tonios20003 ай бұрын
@@djdjm600 ok, merci. Je vais regarder ça, mais à première vue les gouvernes ne sont pas vrillées... Sur le tiens tu n'as pas ce soucis ? Premiers vols hier dans une faible dynamique, donc pas vraiment révélateur pour l'instant ;)
@sebcam94983 ай бұрын
Those bungee starts are really impressive! Have you made an estimation of the exit speed?
@djdjm6003 ай бұрын
Yes! More than 300km/h at the bungee start 🚀
@sebcam94983 ай бұрын
@@djdjm600 incredible
@Martin_OneWing3 ай бұрын
With a "Bungee" set from EMC Vega, I can constantly get >180m...a good launch will get you nicely over 200m😮
@mug68043 ай бұрын
Sick!
@jadelfpv38393 ай бұрын
Diversion garantizada 🙌👌😍😍😍
@djdjm6003 ай бұрын
Yes ! Thanks for watching ;-)
@ratlschneider71893 ай бұрын
Could you tell me your settings please. Rollrate is incredible 😍
@djdjm6003 ай бұрын
Yes, I added my settings in the video description 👍
@billscottuk3 ай бұрын
what are the yellow clips you took off before openig the bag
@ratlschneider71893 ай бұрын
I guess it’s protection for antennas
@djdjm6003 ай бұрын
Yes, it is a 3D home made part for antennas protection 👍
@MelindaGreen3 ай бұрын
I would destroy that thing so fast, assuming I didn't get a heart attack first!
@MrBrookeet3 ай бұрын
Leszek D make this XBOW² ? :D
@djdjm6003 ай бұрын
:D
@snakelord83583 ай бұрын
👍👍
@djdjm6003 ай бұрын
😘
@PHOENIX-Production3 ай бұрын
T'es un AS mec ;)
@djdjm6003 ай бұрын
Merci mec 🙏
@BouncebackFpv3 ай бұрын
Ça envoie !
@djdjm6003 ай бұрын
Grave 🚀
@SERIALPALL3 ай бұрын
Insane bro 👊🏼
@djdjm6003 ай бұрын
Thanks bro 👍
@lucdurand63473 ай бұрын
Incroyable la catapulte et la finesse qu'il a !
@djdjm6003 ай бұрын
Yes ! C'est super impressionnant en vrais 😱
@anjolasboy3 ай бұрын
How do you fit the lipo tattu inside? I try but dont fit. Do you big the foam?
I used a 4S 2600 and a 2S 2600 in series so a little heavier, but it worked out perfect and the more stable it gets due to the added nose weight. video is on my channel
@re30655 ай бұрын
Thank you for making this video as I am moving into LARGER aerobatic planes and ELECTRIC ONLY as I have not flown gas for at least 10 years. I am also going with PNP BALSA planes and the LARGEST I have, so far, is the 67" Skywing Laser. I also have 2 60" PNP BALSA planes and 2 48" PNP BALSA planes - all AEROBATIC. I purchased these PNP BALSA aerobatic planes because I do not like to build ARFs.
@re30655 ай бұрын
Hello - What manufacture are the spring loaded servo arm connectors?
@djdjm6005 ай бұрын
It's Sullivan ;-)
@qiangsheng43025 ай бұрын
VERY COOL FLIGHT!! AND MUSIC 😊
@djdjm6005 ай бұрын
Thanks ;-)
@albertocastillo68625 ай бұрын
great video, contratulations for the flying skills. One question, what is the fligth time you get with the 6000mAh ?
@djdjm6005 ай бұрын
Thanks ! 5Min in hard 3D 👍
@albertocastillo68625 ай бұрын
@@djdjm600 Thanks for that, I already have a 74" Edge from Skywing too, and was looking for information and your video is really good for what I'll probably do in the near future. Right now it has a DLE 35ra but it is anemic to get off the hover and that electric motor combo looks awsome to what I want, so thanks again. I'm not near of flying 3D as you, but like to have enough punch to get out of some situations, and using 12s is not an option for me.
@mikesrcgarage5 ай бұрын
That was awesome! Did you use the stock blk 7" prop for 4's I am going to do my first 6's flight with my EFX racer but I put a 5'5 x 6.5 APC speed prop on it? Your setup sounds amazing and rips!
@Lopez_rc4 ай бұрын
Have you already flown yours on 6S? I did it today using all stock even the normal 4S prop. My esc seemed to be okay, not even hot.
@mikesrcgarage4 ай бұрын
@@Lopez_rc Wow you ran the 7x6.5 prop on 6's? That must have been really fast!!! I have run on 6's but I use a 5.5x6.5 prop. I have some 6x6 coming for 6's 7x7 for 4's and 8x8 for 3's. It's a fun plane ✌🏼😎👍🏼
@franckylaglisseable5 ай бұрын
Waouh tu as bien présenté ton avion mais tu n'a pas peur de le casser
@ChristopheKourylo5 ай бұрын
Superbe vidéo, et TIP TOP le pilotage, parfait et bravo.