Thank god for the new wheels! The stocks were uglier than sin
@UnifiedRacingChannel12 күн бұрын
@@joesota5178 the old wheels did match the driver perfectly though lol
@joesota517812 күн бұрын
@@UnifiedRacingChannel you’re not wrong
@spittman7519 күн бұрын
It does not work with a cheap aftermarket alternator. The alternator is not machined to fit between the lower mount. Don't even bother to try. I had to grind the alternator mounting to be able to make it fit.
@DemiseTheGod24 күн бұрын
You saved me. Sold the car thank god
@evanwynn5542Ай бұрын
Is brad's ebrake somehow moving and making his brake lights go off?
@UnifiedRacingChannelАй бұрын
No it's either some weird wiring or the brake switch rattling apart. No electronics on the hand brake
@maxvang4802Ай бұрын
I just notice the fan. Now I need one.
@UnifiedRacingChannelАй бұрын
It's a life saver on those hot days
@maxvang4802Ай бұрын
I like the flashers on the taillights. 😂
@UnifiedRacingChannelАй бұрын
@@maxvang4802 lmao! There's a gremlin in there that I'll be trying to find. I keep forgetting about it until I watch these clips
@EKBoostedАй бұрын
Correction, second slowest car. I was the slowest. lol
@NextxccАй бұрын
I have had a few conversations with Phil after a couple runs. He couldn’t be nicer about it!
@UnifiedRacingChannelАй бұрын
Phil's a great dude for sure!
@MrMightymayo24Ай бұрын
I really appreciate this, that's very clever.
@BruceLee-xp5fcАй бұрын
Awwww man , I need to find an oem wing now
@UnifiedRacingChannelАй бұрын
100%
@NextxccАй бұрын
Nice work on getting that 10!! Love the TP scare at the end! haha
@UnifiedRacingChannelАй бұрын
Just waiting on TP to text 🤣
@wimpyweasle131Ай бұрын
Can we get a " y'know" counter?
@UnifiedRacingChannelАй бұрын
Y'know I think we could! Lol
@agnbmotorsportsallgasnobra9470Ай бұрын
How do you put it back in? I’m struggling like a MF. It won’t go back in unless I remove the oil filter housing. My alt won’t go in. I got mine from O’rileys. I don’t know if that makes a difference. I shaved the mount and everything 😢
@zho6702 ай бұрын
Twisted metal truck !
@claudelandi5102 ай бұрын
Would have scared the crap out of me driving like that as a kid.
@expressiondestination64302 ай бұрын
Nah fam I've played twisted metal😂
@UnifiedRacingChannel2 ай бұрын
Right! Lol
@douglashandy9082 ай бұрын
Know bodies worried about global warming I guess....
@CrazySchultz172 ай бұрын
I would think that the fan would blow the heat away from the exhaust enough!
@CrazySchultz172 ай бұрын
I love how it sounds at an idle!
@maxvang48022 ай бұрын
Clean and flow the injectors. It might help with the rough start.
@UnifiedRacingChannel2 ай бұрын
It's been like that since the injectors were brand new. Vtec is locked so the valves open up further making it tougher to start
@maxvang48022 ай бұрын
What cams are you running?
@UnifiedRacingChannel2 ай бұрын
@@maxvang4802 Skunk2 Pro 2
@Pildnerpan2 ай бұрын
I hate it here 😂
@mmbb20002 ай бұрын
JOE BYREN
@EKBoosted2 ай бұрын
Letsssssss gooooooooooooo
@freddymandry11282 ай бұрын
BMW dealer will change your around $1500 to $2000
@freddymandry11282 ай бұрын
Anyone give me $500 and I will replace your alternator and not cutting nothing and just in 3 hours
@freddymandry11282 ай бұрын
Wow you don’t need to cut nothing just loose the air compressor and the bace is under the alternator and is done bro stop clothing thing
@twHomeShow3 ай бұрын
Dang...the rear armrests look like they will only be wrist-rests...they are mount too far to the back of the vehicle ...yikes!
@terrysweatman1923 ай бұрын
Bought my top for my ap1 from eBay. Had it installed by a professional for 300.00. Looks great after two years. OEM top was over 2,000.00 plus installation
@brittanycrum39903 ай бұрын
Have facebbok
@89hybrid884 ай бұрын
Yeah that’s a good feeling of satisfaction. Solid core wire breaks easy.
@89hybrid884 ай бұрын
13 x 10” ? Welds
@UnifiedRacingChannel4 ай бұрын
Yep!
@EddieKM4 ай бұрын
The good thing is some of us n54 owners are used to taking the intake manifold out every other weekend, so no biggie.
@silverslinger45044 ай бұрын
Is the top still really tight and hard to close or has it loosened up like oem?
@UnifiedRacingChannel4 ай бұрын
I sold this car a couple years back but it did loosen up after a few uses but it was super tight after initial install
@1Neff15 ай бұрын
A quick question, I know this is a 3 year old video, i finally got the alternator in but I am having a hard time getting the bottom bolts back, the ones on the top line up perfectly, but those bottom bolts will go in a little ways and then I'll hand screw them to a point and they just keep turning. Please advise?
@acexayaphet7865 ай бұрын
How much did shipping cost on the front end?
@UnifiedRacingChannel5 ай бұрын
I want to say it was 300 and had to be shipped to a business address. It was a shit show just trying to get it to me.
@acexayaphet7865 ай бұрын
@@UnifiedRacingChannel sheeeshhh. I appreciate the info on that! Was looking into a Jase 3 piece. Hopefully have an idea now. Thank you.
@UnifiedRacingChannel5 ай бұрын
@@acexayaphet786 Personally I think you should consider the Jase. This 3 Piece in my opinion seemed to have a lot of unnecessary fabricating to get on and I wish I would've went jase but just like everyone else I was trying to save a buck and ended up regretting it. Can't blame anyone though because racing is financially stupid but we love it lol
@acexayaphet7865 ай бұрын
no you are absolutely correct lol! i always try to save a buck myself. cause cars are expensive! @@UnifiedRacingChannel
@KasaiPlayer5 ай бұрын
Will the 07 335i n54 0-121-715-116 alternator fit 07 n52 328i ? They look identical.
@javiercuevassanchez64465 ай бұрын
Are you guys going to race this year
@UnifiedRacingChannel5 ай бұрын
100% we are. We have just taken a winter break. We are coming back with some hopefully saucy passes at the track
@dewanwahed77545 ай бұрын
Appreciate this subscribed
@user-rv2xy5jv1f6 ай бұрын
Thank you!!!!
@kierenholderdrift6 ай бұрын
How do you get it back in manged to get if off but struggling to get back in
@B-bl8ff6 ай бұрын
dude thats fkn awsome just saved me a f ton of work
@luisvargas45777 ай бұрын
I removed my old alternator by cutting plastic from intake manifold but still kept the nipple without fully sawing it off. The plastic nipple is where the engine cover bottom right corner snaps in to. I also cut 1/2in from connector that’s on the alternator that sticks out. Then I removed the alternator. I had to sand down bottom right and top left corners from new alternator at least 1/16th. So that I had enough clearance for the OFHG (top alt.) and also allowing bottom side of alt. to slide in to place easier. I did not have to remove a/c compressor Or metal bracket behind a/c compressor. I made sure not to sand off too much so that the new alternator fit nice and snug. I used a rubber matter to line up the alternator bolt holes. I did not have to cut connector from new alternator. Took me 1 hr to do this job without removing intake manifold. 2014 f30 n55
@sagek123gmail7 ай бұрын
Exactly the video I was looking for. No bs, just real mechanic shit. Respect.
@AaronsTalks8 ай бұрын
Looks very similar job to MX5 from the same era
@PanPeklo10 ай бұрын
I really cant thank you enough for this tip. Didnt even have to remove the chagepipe and without sawing the part of the nipple itd take like 20 minutes to replace. Great vid. But I must point out that its a T60 for the belt tensioner. You probably removed the plastic cover for the tensioner pulley.
@alexanderfeliz797211 ай бұрын
Thank you, I was going crazy because I didn’t want to take .my car to a dealer shop, for alternator that look so easy to remove . That’s for saving me money Great tips
@RickySpanish168 Жыл бұрын
Got a decent new looking one at a euro salvage yard for $100 and had it swapped out in less than 20 mins! Amazing feeling
@millerbuilt1457 Жыл бұрын
What year is the car I have a 99-00 ek and wanted to know if it’s going to work
@UnifiedRacingChannel Жыл бұрын
Mine is a 00 but this front end is kind of a pain in the ass to be honest.
@millerbuilt1457 Жыл бұрын
@@UnifiedRacingChannel so would you not recommend buying it ?
@UnifiedRacingChannel Жыл бұрын
Only reason being is it has never fit nicely after a ton of tiny modifications. The fenders in my opinion are too tight for fiber glass. We spent hours making it look decent. I honestly would've went carbon fiber where the molds would be a little more fit friendly
@UnifiedRacingChannel Жыл бұрын
Do some research but I personally wouldn't get this one again
@the_crazee_1gaming941 Жыл бұрын
I can imagine how chapped Kelms ass was after you shut it down while he has extra parts at the house. 🤣🤣🤣