Where did you get that windshield from and how much.
@togetunthemood434 ай бұрын
thanks so much here i go thinking i needed to get a shop to do it im bout to order some right now
@zato62267 ай бұрын
It's funny how he hit his gas tank with the screw driver right off the bat.
@guachoactopandaxtha84117 ай бұрын
Isn’t there a little spring that goes inside there on the cable ?
@InOneWeTrust8 ай бұрын
could you send the link to the listing?
@alonsoviveros38599 ай бұрын
Dónde puedo conseguir parabrisas como ése
@ibrahimonde9 ай бұрын
Hay senin çekeceğin videoya sokayım.
@kennethgarcia722210 ай бұрын
Thank you for the wiring guide. They work great, for about 45 minutes!! A couple of the led’s started flickering, 45 minutes later half are out. Hope they honor this $200 crap!
@nasty2g Жыл бұрын
sooo my dumbass pulled that metal tip out of the clutch rubber trying to put this on, how do i get this piece back into the rubber
@gassora Жыл бұрын
The engine is in the way
@gassora Жыл бұрын
Hey having trouble getting at the screw for the intake do I just need a really long screw driver?
@user-wx6fs7ls5b Жыл бұрын
Don't care when this was made. Glad this is up here. Thanks
@coronaman3668 Жыл бұрын
Ive been looking on how to put this cable back on after my engine swap. Youve helped so much dude. Godspeed🫡
@ibxlegendx Жыл бұрын
i would love to see a step by step. Im swapping out the frame this month
@hendale7720 Жыл бұрын
What resistor are you using
@jaydot1987 Жыл бұрын
It came with the unit. I purchased it from @meancycles
@HossWest Жыл бұрын
I just got an M109r without front tuen signals. There are rear turn signals and they work. Where would the front turn signal wiring be?
@jaydot1987 Жыл бұрын
Under the headlight housing.
@pablo6305 Жыл бұрын
I'm glad you were man enough to admit that you never done a clutch cable and then teach me how it's done. You being fast learner helped me fix my clutch cable. There is to many videos of morons acting like they know what there doing. I think you can honestly have good channel just doing shit yourself. Thank you for your guidance..your a mechanic and teacher and a non fiction production artist. Keep up with the good work. May the force stay strong in you.
@rexxsequeira2 жыл бұрын
This guy said 36" (inches) 😳 it's mm btw 😋
@jaydot19872 жыл бұрын
Hello, mistakes do happen. I hope the video was helpful. Thank you.
@davidromerolopez93822 жыл бұрын
Ke video deierda
@mexiatexas12 жыл бұрын
Hey sir… how did you ever figure out to get your headlight back on. I took mine off, and for the life of me can’t get it back on. I notice it took you a little while to get yours back in place. I tried all afternoon yesterday and finally gave up.
@KelsS1k2 жыл бұрын
I know Suzuki sportbikes have a little nipple under the gas tank that you open up and shoots air out of it, some other motorcycles i believe you turn the engine on and shake it
@MichelleLopez-dn2rd2 жыл бұрын
The Amazon
@jaydot19872 жыл бұрын
Quick fix, little downtime
@JoseVazquez-dy9tu2 жыл бұрын
Thank you I just had the same problem on my CB650R
@paulprall43832 жыл бұрын
Good video just changed my MT-10 to Evans waterless coolant and it got hot twice(light came on) @ idle. Rode it around the neighborhood & it stopped. But a few days later rode to work & noticed it would creep up to 225F then come back down real quick. I got home waited for it to get cold removed the cap idled it with a fan up front then it started burping a ton of bubbles around 225F & level went down noticeably topped it back off & it quit doing the big changes in temps. The bubbles create heat pockets.
@josececiliomendoza22952 жыл бұрын
does it work to raise and lower gears?
@josececiliomendoza22952 жыл бұрын
does it work to raise and lower gears?
@cruelremembar64712 жыл бұрын
รถในฝันผมเลย
@sylvestersingh46772 жыл бұрын
Where did you buy the frame from
@martinortega59642 жыл бұрын
On ebay
@sylvestersingh46772 жыл бұрын
@@martinortega5964 and just to be sure you both a frame from ebay with a title
@martinortega59642 жыл бұрын
Yes
@Davemilward2 жыл бұрын
I know this is an old vid bit i was using it to see something with my cable route. Aside from that noticed the clutch return spring was missing. This is a vital part. Hope you fixed it.
@59plexi3 жыл бұрын
engine ice is bad for your bike, it boils over at a higher temp, nuking your engine, regular antifreeze has a lower boiling point, telling you your bike is getting hot....that company should be sued!!!!!
@Malignantt13 жыл бұрын
Just bought a ninja 650r and was running it around the block for about an hour. Got back and shut the bike off and noticed a bubbling sound coming from the reservoir. It was definitely gurgling/bubbling from the reservoir because it was vibrating. I had the idle speed on a bit too high, but I assume this is probably the issue. Dont know what coolant the guy used so ill be changing it with engine ice. After turning the idle speed down i rode around on it again for like 10 minutes and it didnt make the gurgling sound but im still gonna change it and shake those air bubbles out like you did. I really hope this is the problem and not something else
@relg69823 жыл бұрын
All that talking is not necessary.. Jesus Christ
@jaydot19873 жыл бұрын
So mute it and just watch the guides smarty pants.
@user-qx5ss7xd1j3 жыл бұрын
قال الله تعالى(وَالَّذِي قَدَّرَ فَهَدَىٰ) . الايه قَدَّرَ قَدَّرَ قَدَّرَ .
@amardeeplmz80683 жыл бұрын
Track edition
@rudelmartinezvarona573 жыл бұрын
Cuánto vale esa bellosura
@flrradio93 жыл бұрын
How did you get out the one that was stuck?
@doylejones86883 жыл бұрын
Lmfao
@jaytee35653 жыл бұрын
Bruh wtf is this
@oliviacaluza91273 жыл бұрын
Nice
@oliviacaluza91273 жыл бұрын
Wow so bferi foll
@martinortega59643 жыл бұрын
How are you going to prove purchase of the motor if it's the same serial number as the frame as they should match they will ask you this when you register it
@sylvestersingh46772 жыл бұрын
I have the same problem
@jaydot1987 Жыл бұрын
No one checks the serial number on the motor. It’s usually the frame, which is inside, and the neck that holds the vin and the title that usually gets checked.
@Gh..o..s..t3 жыл бұрын
Is the bike running or off?.
@leerate96313 жыл бұрын
Thanks
@gtonline73 жыл бұрын
look forward to watchin your journey brother - from Australia
@jaydot19873 жыл бұрын
Thank you so much for your support. I genuinely appreciate you.
@alexanderhernandez61863 жыл бұрын
Where did you get those levers from cause I have hydraulic clutch also but can’t fine none
@jaydot19873 жыл бұрын
These are cnc aftermarket levers I purchased on eBay.
@kennymcg48943 жыл бұрын
Where did you get your clutch cable from? You're in t.o right?
@jaydot19873 жыл бұрын
Kenny McG I purchased the cable from a Suzuki dealer on eBay. I hope the video was helpful.
@jimrees17783 жыл бұрын
Great video, thank you very much.
@jaydot19873 жыл бұрын
Jim Rees you are very welcome. Just make sure all those bubbles are out, and top the radiator off when the coolant drops.
@TheGoose314 жыл бұрын
Thanks man, just removed it on my k3 and now i cant seem to figure the stupid bracket on top of the oil cooler...ill give it a shot in the morning. Mine only has 2 bolts unlike yours with 3, and i cant understand if it should go behind or in front of the oil cooler
@CoyoteDe244 жыл бұрын
Link to lights 🤨
@jaydot19874 жыл бұрын
Link in the description.
@rasninja99624 жыл бұрын
How can you start an instructional video halfway through?
@jaydot19874 жыл бұрын
Ras Ninja 🤣🤣🤣 I thought about making the video after taking taking screws out. Hope it was helpful.
@rasninja99624 жыл бұрын
Mrincr3dible 1 It wasn’t because of where you started. I’m trying to figure out the size of the screw in the back of the foot pegs. I’ll just take it with me to Home Depot tomorrow