Sprues-To-Scale

Пікірлер

@J.Cheetos Ай бұрын

Dude I have a weird question but I want to buy a 1:48 a4 sky-hawk. Hobby Boss and Hasegawa make one but I don’t know which one I should get. From your experience in general is hasegawa or hobby boss easier. I am a medium level builder but I don’t want a confusing instruction booklet.

@SpruesToScale Ай бұрын

I have no idea. From my experience, the newer the molding, the better. You might want to check out Scalemates and see the entire history of the model. Sometimes you can download the instructions and study them.

@J.Cheetos Ай бұрын

@@SpruesToScaleok ty that’s really cool I didn’t even know that existed

@J.Cheetos Ай бұрын

This kit looks some what easy do you think I should get one as a beginner modeler

@SpruesToScale Ай бұрын

Yes, but probably take care with the flaps. If I remember right, they are a bit fiddly.

@SpruesToScale Ай бұрын

Yes, but probably take care with the flaps. They are a bit fiddly to assemble to the wing.

@J.Cheetos Ай бұрын

Yeah thank you for letting me know I saw one of these at my hobby store and I wanted to pick it up since it was cheap and I always loved the way they look.

@J.Cheetos Ай бұрын

Also for the oil streaks near the nose, do you think it would have the same effect if I used Tamiya black weathering instead of an airbrush?

@SpruesToScale Ай бұрын

I don't know. Maybe try it out on some other piece of plastic.

@jcwoodman5285 2 ай бұрын

Very cool! We'll done! I just finished this very kit in the Africa scheme, great kit!😊

@lukaszgardyza3383 3 ай бұрын

Super budowa !

@Michu32421 3 ай бұрын

Hellow how many hours does IT take yOu to make this model excluding drying time

@csh5414 3 ай бұрын

Great job and a nice subtle look. If I am using seat belt decals, I cut them and leave the backing paper on..just glue them in place. Looks more realistic. Landing flaps would be raised upon landing and prior to taxiing. Firstly they provide lift..not required after the touch down and secondly to avoid damage on rough strips…They do look good down though.

@user-jw1dc9uo6v 3 ай бұрын

Унитаза на бомбовой подвеске не хватает. 😂😂😂

@IRAQI901ahmad 4 ай бұрын

Iraqi

@fasold2164 4 ай бұрын

There are a lot of modelling-reports here on youtube, and in doing so almost everyone follows the same pattern. It's always funny to see that a lot of effort is done in painting and weathering, but obvious faults of the kit are ignored. In this case the wheel wells for instance are too shallow...

@malkontent21 4 ай бұрын

Witam. Szacunek, model tragiczny, a kolega się nie poddał.

@NationalistPop 5 ай бұрын

"Despite my best efforts, the wings still fit pretty well", funny, lol! Nice build.

@freddakin7119 5 ай бұрын

Outstanding!

@matthewwagner47 5 ай бұрын

Good selection. Maybe some metal extra part would be cool. Looking up actual war plane footage that showed more detail might help. Good job.

@baranypisti 6 ай бұрын

"Despite my best efforts, the wings still fit pretty well" :D :D I love that! The result is awesome, you have nothing to worry about. I'm building a similar kit, the g-6 version and your video was useful. Thanks! Oh, and you did a great job with the mottling as well.

@bloopero 6 ай бұрын

Well played, mate🫡

@theboys2212 7 ай бұрын

part of me says this is hard, another part of me says this is calmy easy

@JedenSiedemDwa 8 ай бұрын

Excellent done! Lookd perfect! All the best for You! ;)

@Sidewinderhobbies 8 ай бұрын

Nice build!

@jamesdoran9423 8 ай бұрын

Very nice, but flawed. I was in Attack Squadron 52 from Dec 1963 to Jul 1966 as an Aviation Ordnanceman Third Class. I don't know how may rocket pods and bombs, including napalm, I loaded on those Spads. What I do know, however is that ordnance and fuel load never occurred. We either carried 2 drop tanks on the MK 51 racks or 1 Drop tank on the Aero 2 Ejector Rack. Never both. We did, at times, alternate LAU-19 rocket pods and 250# GP bombs, however, those 6 triangle things are USAF only. I never saw one other than in photographs during the 21 years I spent as a Naval Aviation Ordnanceman. We darn sure never had them in our squadron. The pilot's name, on the canopy rails of 300 should be "CDR Fred Fellowes, CAG". Our routine loads were 1000 lb bombs on the MK 51 and alternate 500 # and 250# on the wings, center line drop tank, or two drop tanks we'd put a 1000 or 2000 pounder on the center line. For ResCap we used the center line drop tanks and in the day time we'd have Zuni Pods (4 shot, 5" rockets) on the MK 51 racks and alternate LAU-19 and LAU-7 rocket launchers across the 12 wing stations. At night we'd lose the LAU-7s and replace them with either MK 24 or MK 45 Parachute Flares. Also when flying back to the ship from NAS Cubi Point, RP the 4 invoard gun ammo cans, with good insulation to prevent breakage, could each carry 4 imperial quarts of booze. Back in thye states hang 2 drop tanks on the MK 51s and a blivet on the center line. A blivet was an old drop tank with doors cut in the sides and totally cleaned out of all fuel residues and used as a "luggage" carrier. We'd send two birds from NAS Alameda, CA to NAS Brunswick, ME on a cross country navigation training flight. On the way back the blivets would be filled with seaweed and live lobsters.

@SpruesToScale 8 ай бұрын

Hello James, thanks for the comment. It's great to hear from someone that actualy saw these planes while they were "on the job". I'll pin it to the top so anyone else building this kit may find some useful information. I guess I was just following Tamiya's directions for the loadout and I was more concerned with getting the decals to conform and with airbrushing the smokestains. I probably took some liberties with the fuel tanks. I'll have to dig for the instruction sheet to make sure. As far as the pilot's name, I guess it's CDR Billy's plane now. Don't remember any other inscription being provided on the decal sheet. PS: NAS Cubi Point looks like a beautiful part of the world.

@Acheiropoietos 6 ай бұрын

I really love the soundtracks to this ❤️

@booked_bethie 9 ай бұрын

One of my favorite planes, awsome model!!

@user-yw8kx7sn6p 9 ай бұрын

На Советских самолётах не может быть панельного эфекта . Они были покрашены алюминеевой краской ))).

@SpruesToScale 8 ай бұрын

This one looks pretty metallic to me. Let's pretend it's this one in the video. :) www.flickr.com/photos/chrism111/53192453605

@gonzalomendoza3152 9 ай бұрын

Excellent Build! Great work on the video swell.

@HammerheadModelMaking 10 ай бұрын

great build, I particularly like the exhaust effect you got with the airbrush!

@p51dlm22 10 ай бұрын

The instrument panel decal appears to be backwards.

@Rainbow_factory728 10 ай бұрын

Looks like fun

@martinmengh 11 ай бұрын

the profile of the entire canopy is completely off

@davidm6256 Жыл бұрын

Nice! I have done 2 Skyraiders Navy and Air Force, but I have not gotten panel lining down, still need some help

@Strateggo Жыл бұрын

Amazing. The pre shading is master. How long did it take you total to make the entire model?

@SpruesToScale 8 ай бұрын

Usually a month, maybe two for one model, but I build whenever I have free time so it's not actually 30-60 days of uninterrupted grind.

@jonhking5570 Жыл бұрын

Nice 109 camo looks good you should have a go at a fw 190 from eduard ❤

@christosswc Жыл бұрын

Nicely done

@iaincathro3373 Жыл бұрын

Superb work!

@wasrio1403 Жыл бұрын

Excellent workmanship on your 109. If you don't mind the underside colour should be rlm76 but it looks like rlm65. Still looks great though. Also get rid of the Trumpeter riveter and get yourself a Rosie the riveter 👍

@GhostRider247 Жыл бұрын

beautiful !!!!

@argentinianspotter Жыл бұрын

Nice 109. Are the decals from the kit the ones of Eduard's new style that can be peeled off?

@SpruesToScale Жыл бұрын

Yep. It's all out if the box.

@SpruesToScale Жыл бұрын

I just read your entire question and they are normal style of decals. No peeling.

@tonyde6423 Жыл бұрын

Nice one mate cheers ✌

@SpruesToScale Жыл бұрын

Thank you! Cheers!

@Android-rz8mb Жыл бұрын

Awesome build !!!! The one thing that makes a great model builder is making a mistake and being able to fix the mistake to a perfect finish

@Ftc.6 Жыл бұрын

Excellent quality

@RaduB. Жыл бұрын

It's always fun to build a 109, no matter what variant. And the standard german camouflage is the cherry on top! 🙂 Eduard's 109G looks less fiddly than their E. Thank you for sharing! Maybe a romanian one next time! 😉

@SpruesToScale Жыл бұрын

I do have a Romanian stationed 108 in the stash. Hope it counts. Mersi. 😁

@cmarnold78 6 ай бұрын

Yeah, all the Fs Gs & K are basically the same kit. Nice and straight forward. The Es are super fiddly and a lot of extra work with the engine.

@MrFl0bo Жыл бұрын

Great job! Turned out great 😁

@SpruesToScale Жыл бұрын

Mulțumesc

@SprueFascinationChannel Жыл бұрын

Excellent result 👍

@SpruesToScale Жыл бұрын

Glad you like it. 🙏

@carzenriq Жыл бұрын

Fine work! Thanks for sharing

@SpruesToScale Жыл бұрын

Thank you. 👍

@user-hm9nd2ci6p Жыл бұрын

Nice job, my congratulations!

@SpruesToScale Жыл бұрын

Thank you!

@UjecenaPica Жыл бұрын

Insane!

@user-du6yr1qx5d Жыл бұрын

Прекрасная модель....этой фирме еще бы ,Як - 3, сделать и ,Як - 7,...было бы ваще!!!

@LevoRider Жыл бұрын

Well I finished mine and I am semi happy with it, I struggled with the weathering like usual. So I gave it a new paint job and left it at that. Someday I may come close to the detail and beauty of your models.

@SpruesToScale Жыл бұрын

Thanks for sharing! Just take small steps and don't try to finish all the weathering in one go, i guess. :)

@Napolitano24 Жыл бұрын

I just started building some gundam figures (master grade) and after about 5 I quickly realized it’s not challenging enough for me. No real technique goes behind it other then cutting and sanding. I don’t know why but I decided to look up aircraft kit building and stumbled across this video. I’m not going to lie this video is insane! I love the building part but those airbrush techniques are awesome!!! I just subscribed and looking forward to more videos. 💪🏻 Ps: do you have any “how to” whether it be airbrushing, painting, blending, thinning etc… thanks 💙💪🏻

@SpruesToScale Жыл бұрын

Awesome to read this. I don't have any actual tutorials but there are plenty of guys on YT that do. @MMScaleModels comes to mind. Thanks for watching! 👍