11 ай бұрын
Пікірлер
@IanGrym Күн бұрын
Yup, without it, the bike is slower than the losi. The 2s lipo run time isn’t as long either.
@hcoppola1228 Күн бұрын
what lipo 3s did you use?
@IanGrym Күн бұрын
@@hcoppola1228protek 4800mah 3s
@hcoppola1228 Күн бұрын
do you use the 3s on sagittarius in this video?
@IanGrym Күн бұрын
Yup
@larrydy5368 10 күн бұрын
Good to see that you guys were able to get together and run your bikes.
@da_supreme_kai 16 күн бұрын
How long did the replacement take to arrive?
@IanGrym 16 күн бұрын
Took more or less a week. And they let me keep the broken core.
@MY5T1K. 18 күн бұрын
Getting mines soon, it was on sale so hopefully it’s in the best of working
@Eric_Rides 18 күн бұрын
Good stuff man. Hope to see you out there next Saturday.
@ManfredWolf-ng7qq 21 күн бұрын
Was ist das für ein alberner 😂Scheiss
@edgarpoe517 24 күн бұрын
Where is this? Those big cars are great!
@IanGrym 24 күн бұрын
Warm Springs RC Raceway in Fremont, CA. It's open almost every weekend for practice or races.
@edgarpoe517 24 күн бұрын
@@IanGrym omg gtfo I'm down in the southbay. See you guys soon!
@buffalodiehard 27 күн бұрын
what tires are the limitless class running?
@IanGrym 27 күн бұрын
Mixtures of PMT soft/supersoft/med or GRP 1/3/5. The fully treaded versions, not slicks.
@tallpaul1269 28 күн бұрын
Nice. Looks like it rides pretty nice. What forks do you have on it? They look really smooth.
@IanGrym 28 күн бұрын
These are the stock kit forks. They actually aren't that good and get stuck in the fully compressed position once in a while. I had to stretch the springs inside a little to prevent that from happening.
@tallpaul1269 28 күн бұрын
@@IanGrym The forks on mine stick too. They need to be cleaned and lubed to work even half decent.
@tediz9 29 күн бұрын
I have the Vega Hilt 2.0 which uses the DC port. Can I buy the core with USB C port to replace it?
@IanGrym 29 күн бұрын
It should work, the USBC will just look small in the DC connector hole.
@tediz9 28 күн бұрын
@@IanGrym I actually emailed to their support team. They said it wont work.
@IanGrym 28 күн бұрын
Too bad, is the version you need out of stock?
@tediz9 27 күн бұрын
@@IanGrym No. It's not that. I just prefer USB-C instead. I have phone charging cables with the USBC. So I dont need to pull out another cable just to charge the hilt.
@Eric_Rides Ай бұрын
Thanks for sharing. I’ll be out there next Sat for open practice with my Promoto mx if you’re interested.
@IanGrym 16 күн бұрын
Hey Eric, we are running bikes today at the Silliman Center field in Newark at 6:30pm if you would like to join. Otherwise I'll see you on Saturday for practice at Rams.
@Eric_Rides 16 күн бұрын
I’m unprepared for tonight but for sure Saturday 👍🏼
@ninjaarcades7356 Ай бұрын
Bike looks more stable under break has it made any difference to lap times and cornering
@ligh7c Ай бұрын
Can this be modified to work with a proffie board? I have the Kylo Ren version of this by tigoola
@IanGrym Ай бұрын
It's probably going to take a lot of work designing a plastic board chassis that will fit the board and the layout of this hilt. Might as well just buy a new hilt that is made for the proffie board.
@ligh7c Ай бұрын
@@IanGrymcan the blade be re-used when buying a new hilt designed for the proffie board?
@IanGrym Ай бұрын
@@ligh7c I don't think so. I tried hooking up this blade to my xenopixel board and it never fired up. Maybe this blade has the incorrect number or layout of LED's inside. But it seems to only work with the board that is inside.
@pranavsrivatsan4577 Ай бұрын
Noice vid bro
@pranavsrivatsan4577 Ай бұрын
Noice lightsabers and rolex
@alandesotelle8504 2 ай бұрын
Totally worth it
@Fresco_VR 2 ай бұрын
can i have it?
@turbod150 3 ай бұрын
Are you running these stock or what mods have you done
@IanGrym 3 ай бұрын
Cant speak for anyone else but here are my mods: kzfaq.info/get/bejne/rpdxmsJ3qKfUeYU.html
@ballinboy0911 3 ай бұрын
Do you have a link to the ball bearing casters?
@IanGrym 3 ай бұрын
Here it is, the 1.25" versions. I have switched back to the plastic rollers though. The rubber wears out too fast on these casters. www.amazon.com/dp/B0BGD9GHYH?ref=ppx_yo2ov_dt_b_product_details&th=1
@bobbeazley2502 4 ай бұрын
This is not 250 cc race. It’s the 750cc 4stoke superbike race.
@IanGrym 4 ай бұрын
The 250 race starts at the 17:00 mark.
@mikereichard270 3 ай бұрын
I was there
@RCRoads 4 ай бұрын
Awesome collection of RC Motor Cycles. This is a cool road bike and the price is fair. I think it would take a good amount of skill to paint but it looks like it performs well. Thanks for showing the KHB3. 🏁
@fogcityrc4874 4 ай бұрын
Anyone driving bikes from San Francisco?
@holeshothobbies9827 4 ай бұрын
looking and sounding very good Ian. We usually mount the receiver pack under the tank to keep the weight balanced and CG low. ✊✊
@MARKLINMAN1 4 ай бұрын
All that needs is a 6 AXIS Gyro and its a winner, BEAUTIFUL.
@FCRC 4 ай бұрын
What tires do you prefer? for road and offroad use? And willing to share the STL file for the knee and armpads?
@IanGrym 4 ай бұрын
For onroad, prefer the Vitavons front and rear for more lean angle. For offroad I have only tried the Losi ones. Aside from wearing down quickly they work fine. For the pads you can just find free files on thingaverse.
@FCRC 4 ай бұрын
@@IanGrym thanks bud for your quick reply!
@elijahher1663 5 ай бұрын
Can you remove the blade?
@IanGrym 5 ай бұрын
You can start to pull it out but there are multiple wires soldered to it. You can only fully pull out the blade if you cut the wires.
@dbirds21 5 ай бұрын
I don't believe it's your first run on a rc bike. No way buddy. No gyro. You must of edited the crap out of the video
@IanGrym 5 ай бұрын
I wasn't surprised. He's had 30yrs experience driving all sorts of R/C cars.
@dbirds21 5 ай бұрын
@IanGrym rc on 4 wheels is child's play compared to bikes. No comparison whatsoever. There's no way that was his first time on a rc bike.
@nigelmoore6519 6 ай бұрын
Brilliant 250cc race
@SaarlandRC 6 ай бұрын
Nice Car and nice Indoor Track
@katana2665 6 ай бұрын
Good stuff Ian!
@user-uz5om9nx4j 6 ай бұрын
If you get 2 of those would you be able to connect the 2 to make a double bladed lightsaber?
@IanGrym 6 ай бұрын
You will need some sort of custom threaded bushing to thread both of the hilts together.
@user-uz5om9nx4j 6 ай бұрын
How would I be able to do that is it online?
@IanGrym 6 ай бұрын
@@user-uz5om9nx4j No, they don't sell one. You would need to 3D print and design one yourself.
@user-uz5om9nx4j 6 ай бұрын
Oh ok what about if you screw the bottom?
@IanGrym 6 ай бұрын
@@user-uz5om9nx4j I just unscrewed the bottom cap. There is a speaker in there so not much room for a screwhead or backing nut. Might damage the speaker.
@minhdtran3132 7 ай бұрын
where did you order?
@IanGrym 7 ай бұрын
I ordered online from rcmottorad in Germany.
@minhdtran3132 7 ай бұрын
@@IanGrym Do they ship to the US?
@IanGrym 7 ай бұрын
Yup they use UPS I think. It’s expensive but very fast. Took about 5 days.
@vitodambra72 7 ай бұрын
Hey brother looking for a wheelie bar for this exact bike, so you sell them? If not can you post link please? Thanks cool video
@IanGrym 7 ай бұрын
Kinda hard to find, there's one for sale in Oz: www.holeshothobbies.com.au/product-page/wheelie-bar-kit-for-arx-540
@larrythomas7423 7 ай бұрын
Do you have your controller switch on 1/2 throttle?
@IanGrym 7 ай бұрын
No, the throttle endpoint was at 100%.
@zoridor16 7 ай бұрын
Hi friend! I love the Fms F4u Corsair plane...is it possible to fly it with 1 flysky transmitter and receiver? Greetings friend
@IanGrym 7 ай бұрын
Yup, should be no problem. When I bought it, there was no receiver. So I installed my own 6 channel Tactic receiver and used my own transmitter.
@onkelmichl3300 7 ай бұрын
...die Anfänge sind gemacht - weiter so ! :-)
@marcdunivan2436 7 ай бұрын
It is a shame that radio controlled motorcycle racing hasn't taken off in the USA. One can't even find an English language KZfaq channel dedicated to it like FPV quadcopter racing. It is weird that FPV cameras haven't been added to the racing motorcycles where the drivers use FPV goggles. This would remove the need for line-of-site control, and thus bigger tracks. Additionally, retractable outrigger landing gear could be added to the motorcycles like the Peraves MonoRacer (MonoTracer) to keep the motorcycle upright when stopped. It can also assist in righting the motorcycle when on its side, with the gear retracted. There are videos on KZfaq showing this: "The Peraves EcoMobile - Discovery Beyond 2000 (1994)" and "The Peraves EcoMobile - Discovery Invention (1991)".
@AmDevious 7 ай бұрын
Can you use it for fighting? Like play fighting?
@IanGrym 7 ай бұрын
Yup, we've been using them and the blade is pretty thick and strong enough to duel with.
@baaa4698 8 ай бұрын
What specs do u recommend?
@IanGrym 8 ай бұрын
Hobbywing mod brushless motor/ESC combo, high torque steering servo (111oz-in or higher), Savox SH-0265 front brake servo. 21T pinion. 80wt steering damper oil, 200wt rear shock oil.
@baaa4698 8 ай бұрын
@@IanGrym what Hobbywing setup do u recommend? What kv?
@Nick.Tran7777 8 ай бұрын
Hi guy ! Kit kyosho 1/8 diy or original ? Nice bike
@lightningrc1 9 ай бұрын
Nice!
@SmImovies. 9 ай бұрын
. nice
@osamabentrappin4102 9 ай бұрын
Is wheelie mode a stock feature i have to knowww
@IanGrym 9 ай бұрын
Yup, there are three selectable modes on the transmitter. Wheelie mode is one of them.
@jazzcat9363 10 ай бұрын
This thing is selling for $45 on Amazon now 😂 Which is what it’s worth. No removable blade, no custom sound fonts, no clash, majorly delayed swinging sounds, and no idle hum. I definitely would have never payed more than $50 for this, so I’m glad to see it selling for just under that amount.
@j4m3sii 9 ай бұрын
this comment is so backwards…? you list the many flaws it has, then also mention that it’s worth the price? so what’s your pick is it good or not? 😅
@jazzcat9363 9 ай бұрын
@@j4m3siiI think you may have misunderstood what I was reaching for, lol. I was saying because of its flaws, it’s worth only the $45 it’s currently selling for. It’s not worth anything more than that.
@olivierplayer1633 10 ай бұрын
it drives good ! nice ducati style mod !!
@Painisme9 10 ай бұрын
Just the smooth swing is disappointing but pretty good overall
@smservicetech609 10 ай бұрын
Nice build! What body is that?
@IanGrym 10 ай бұрын
try deltaplastikusa.com
@akura2 11 ай бұрын
Nice… still waiting for my green bike…
@Eric_Rides 11 ай бұрын
Oh you got one! Nice!