안녕하세요^^2.5mm환심은 굵기가 굵은편이라 작업할때 함들고 손이 많이 아플수 있어요 거울만 있으시면 라탄스토리 영상중에 합판없이 만드는 거울 참고해보세요~^^
@user-bv8ds3xk6l4 ай бұрын
아! 감사합니다😊
@ivosewi40914 ай бұрын
Berapa jarak antar lubang ?
@user-ot5hk6nj6c4 ай бұрын
Halo terima kasih sudah menonton videonya, jarak antar lubang sekitar 1,7cm.
@richardgrayson99344 ай бұрын
Used google translate and edited as best I could 🌷 Making abalone pattern application basket 🌷 * materials - Reed (2mm), scissors, awl, tape measure, sprayer (water) - Spoke length: 70cm (28 inch) - 16 each ------In the video, the spoke length was incorrectly indicated as 60cm. - Additional Spokes: 35cm (14 inch)- 32 each ------In the video, the length of the extra spokes was incorrectly indicated as 30cm. * Techniques: plain weaving, chase weave, twining, finishing by plaiting the border. * how to make Soak all spokes and weavers until flexible. Soak or spray as needed to keep everything flexible. - Divide the 16 longer spokes into groups of 4 and place them in a tic tac toe pattern #. - Place a piece of uncut reed beside one of the spoke bundles and weave over and under for 3 rounds. -Bend the weaver back over the last group of 4 and turn over the base to continue to weave in the same direction for 3 more rounds. This will put the weaver on the opposite side of the spokes as you weave - Divide the groups of 4 into pairs and continue weaving 1 round. - After one round add a second weaver and chase weave together until the diameter is 10cm (4 inches). Do not cut the weavers - Insert the extra spokes (32 shorter reeds) on both sides of the spokes to make groups of 4 again. - After inserting the extra reed, weave 1 round of twining. - Turning the base over and fold the spokes inward. - Turn the base back over and continue twining while bending down with your palm. - From the next round of twining, stand upright at a 90-degree angle and weave up to a height of 2cm (3/4 inch). - Cut the weavers so each ends behind a spoke Weaving the plaited (braided) border - Soak the basket so the spoke ends are flexible (and keep them damp). - Treat each group of 4 as a single spoke but it is sometimes easier to pass them through loops one reed at a time. - Keep the groups of 4 reeds next to each other not crossing. - Use your awl to open space as needed. - If it isn't right, adjust after weaving before moving on to the next step - Carry each spoke behind the spoke to the right then down to the outside of the basket. The last spoke will thread through the loop made by the first spoke that was turned down - Next bring each spoke over the spoke to the right, under the next (2nd) spoke to the right and up. The last two will pass through loops made by the spokes from the beginning of this step - Now bend each spoke behind the spoke to the left and down parallel to that spoke and pass it under the loop formed at the bottom. The last spoke will thread through the loop at the top (made by the first spoke that was turned down), before passing under the loop at the bottom. Trim the loose ends even with the bottom loops
@user-ou5nu7jk3n5 ай бұрын
쉽게 알려주셔서 감사합니다~ 그런데 거울은 뭘로 고정시켜야하나요?
@user-ot5hk6nj6c5 ай бұрын
완성된 거울은 가는 철사로 작은 원 고리를 만들어 고정해보세요 영상을 시청해주셔서 정말 감사합니다😊😍