Good result! I am about to start this kit and your work is an inspiration. Thank you.
@SENNAVYModelfactory16 күн бұрын
這套車身跟上蓋密合度真的不好
@mjhobbystudio573816 күн бұрын
模具老舊,有點走鐘,要喬及修一下才是😅
@user-sb6by5ww2l18 күн бұрын
劉老闆實作,技藝高超,影片刻線介紹一看清晰明瞭!
@mjhobbystudio573817 күн бұрын
感謝您的欣賞,有您的支持,我會努力製作!!
@user-je5do6jn2f28 күн бұрын
I liked the streamlined cowl and cooling fan in the Raiden. I think Jiro Horikoshi was taking notes from Kurt Tank on his Fw-190s.
@user-je5do6jn2f28 күн бұрын
Too bad the Imperial Japanese War Ministry and Mitsubishi hampered the development and production of the Raiden at every turn. All production efforts were put towards the Zero and Betty, along with cramming precious Sakei radials into only them.
@user-je5do6jn2f28 күн бұрын
Gotta give Horikoshi-San credit. He could create light fighters like the A5M Claude and A6M Zero, but he could as make Interceptors such as the J2M Raiden and A7M Reppu at the same time. Talented engineer, that one.
@user-je5do6jn2f28 күн бұрын
You know, Tamiya IJN Light Grey does have that greenish, hempy hue to Zero grey when you look at it closely enough. Except you could argue with 10 different modelers and get 10 different opinions and mixes/shades about it.
@user-je5do6jn2f28 күн бұрын
Tamiya > Hasegawa for wing root and wing->fuselage gaps... 😵💫
@user-je5do6jn2f28 күн бұрын
That Tamiya LP Silver is about as nice as Mr. Color #2 Super Fine Silver.
@user-je5do6jn2f28 күн бұрын
You want to win at life, pounce wheel and punch every rivet. The Raiden is lousy with them.
@user-je5do6jn2f28 күн бұрын
Mitsubishi Green /= Tamiya Cockpit Color. Mr. Color 126 = MCG
@user-je5do6jn2f28 күн бұрын
Chonky Mitsu...
@DuececoupeАй бұрын
Love it! Beautiful work! 👍🏻👌🏻👏🏻 I have this kit as well and started on their J2M3 (JT45, 09145) a while ago, I better get on with it and finish her! You just popped up in my feed, so I subscribed as well! All the best from a Swede in Glasgow, Scotland! 👋🏼
@mjhobbystudio573828 күн бұрын
Thanks you !!Hope you can do it too !!
@wtl0523Ай бұрын
太好了,有台灣人拍的軍武模型製作動畫影片了。
@mjhobbystudio5738Ай бұрын
感謝您的支持,我會更加努力製作
@MaxalhwАй бұрын
So, the gun is not movable? It looks like they tell you to glue it in place. Why would they do that? Also, the suspension is two pieces which is bad. Good enough review but this model isn't that good tbh. When other 2A8s come out nobody will buy this i think. At least it's cheaper than the 2A7Vs
@mod6153Ай бұрын
Это очень 👍 Сможешь собрать морской бой Ямато?
@mjhobbystudio5738Ай бұрын
Дзякуй, ён занадта вялікі для мяне, і ён займае занадта шмат месца дома
@mod6153Ай бұрын
@@mjhobbystudio5738 очень Крутая сборка, успехов творческих!
@roaringcat142 ай бұрын
what color did you use on the body shell?
@mjhobbystudio57382 ай бұрын
TAMIYA LP-30 +LP-55 THANK!!❤
@NazHanPowerSS2 ай бұрын
谁家的板件?
@rainbowwei55922 ай бұрын
拍攝停留時間太短 鏡頭晃動 致觀看性不佳 可惜
@charliefeliceruihongchasli44454 ай бұрын
這篇文我超喜歡 感謝您 我外公是前瀋陽艦艦長不知道他看到這一篇會有什麼感想? 我先訂閱你了
@clank47406 ай бұрын
細節真多會有另外推出蝕刻包的感覺
@mjhobbystudio57386 ай бұрын
感覺會出
@nd0027237 ай бұрын
早知道我就不單買AH1Z了QQ 沒想到UH1Y裡面就有附...
@schienchou68108 ай бұрын
經典👍
@oggarage93888 ай бұрын
Thanks for more engine 💪👀🤙
@ringowong99769 ай бұрын
長,濶幾多cm?幾錢?
@meihsientsai921910 ай бұрын
Nice review but we suggest take the kit out of the plastic bag for clearer look
@schienchou6810 Жыл бұрын
銀色質感太棒了👍
@mjhobbystudio5738 Жыл бұрын
感謝您!!!❤
@yguyfftyt Жыл бұрын
那個引擎蓋價值18萬台幣 因為隔壁排的學長撞過,軍駕照被吊銷後拖到退伍沒賠跑了。
@mjhobbystudio5738 Жыл бұрын
它好像是玻璃纖維製的,
@mjhobbystudio5738 Жыл бұрын
車身像是鋁合金的,不好鈑金!!
@yguyfftyt Жыл бұрын
把廠牌遮起來光看板件 還以為是某鷹翔造船廠的造艦工程師開的
@mjhobbystudio5738 Жыл бұрын
😆有點像
@calebherman674 Жыл бұрын
🌟 🄿🅁🄾🄼🄾🅂🄼
@gregwilliamson3001 Жыл бұрын
I would've like to see the attachment of the propeller and the painting of the finished model as well. Did you use the plastic propeller or the photo etched? Thanks 👍🏻