@@MileyonDisney felt like styrofoam to me. lol. Either way it’s gone.
@jharper7415 сағат бұрын
Do you cut your own wood or order it to size?
@FreshStartCustoms15 сағат бұрын
@@jharper74 I cut it
@ruthwebb88072 күн бұрын
Should we put a coat of clear coat afterwards,?
@FreshStartCustoms2 күн бұрын
@@ruthwebb8807 if you want to but I don’t
@michaelherrera71453 күн бұрын
what is the wirehead for? You said extra?
@FreshStartCustoms3 күн бұрын
@@michaelherrera7145 yeah just an extra cable for the laser head.
@Merch_by_Tim4 күн бұрын
Very helpful, thanks :)
@FreshStartCustoms4 күн бұрын
@@Merch_by_Tim you’re welcome
@kevinmcmillan21445 күн бұрын
Can you provide links to the files for the prints you showcased?
@FreshStartCustoms2 күн бұрын
@@kevinmcmillan2144 Cable organizers: makerworld.com/models/13849 Holder for the Cable organizers: makerworld.com/models/62199 Large multi organizer: makerworld.com/models/209021 Storage boxes: makerworld.com/models/491513 Ironman mask: makerworld.com/models/394562 Dewalt tool and battery mounts: makerworld.com/models/43123
@st0mper1215 күн бұрын
I cant get past the log files and "Plate 1"that bambu sends from your printer. Think nobody has your prototype? How do you guys be ok with this? and still buying bambu? and yes even when you tell it to not use internet connection its still collecting and sending log files and your plate 1 info. to a amazon server!
@Merlinhexer5 күн бұрын
I don’t care. I love my Bambu and I want to buy a second one. If you have problems with prototyping you can buy the X1E.
@fidesachates15 күн бұрын
Most people don't care. And for people like you and me who do care, we just put them on an isolated vlan without no internet access. Works fine.
@st0mper1215 күн бұрын
@@fidesachates1 Can something like a Pi hole trap the data?
@fidesachates15 күн бұрын
@@st0mper121 that’s not it’s intended purpose. It may be possible to configure a pihole to block dns requests for the host the printer is trying to connect to, but this has many problems. One example is if it’s connecting to a cloud service provider, it’s unlikely you’ll want to block AWS. The isolated vlan or a specific firewall rule in your router is the best way to handle this situation.
@hellfire-gs8ni6 күн бұрын
Nice video. Could you mabye share the link for the hinged box?
@@jasongooden917 here is the link makerworld.com/en/models/13849
@thetxpopulist5 күн бұрын
Was just thinking the same and saw your comment before going to search. Thanks for sharing!
@smeltn2 күн бұрын
@@FreshStartCustomswhat about the holder for all of the organizers?
@FreshStartCustoms2 күн бұрын
@@smeltn makerworld.com/models/62199
@smeltnКүн бұрын
@@FreshStartCustoms thanks so much!
@jasongooden9176 күн бұрын
Wait till you get 2 3D Printers.... haha muhaha muhuhahahaha!
@FreshStartCustoms6 күн бұрын
@@jasongooden917 yeah lol. I am thinking about the a1 mini
@fidesachates16 күн бұрын
Do you have a link for the cable organizers stl files?
@FreshStartCustoms6 күн бұрын
@@fidesachates1 makerworld.com/models/13849
@DarkhorseDescendant6 күн бұрын
Thank you and waiting to see the in-line fan work.
@markcall96957 күн бұрын
Okay - had to comment again. WOW! I am so getting one of these man. So are you using just PLA bud. I think I will need to get a bunch of colors. Do you have an affiliate link?
@FreshStartCustoms7 күн бұрын
@@markcall9695 I am using just pla for right now. I don’t have an affiliate link right now unfortunately. I applied for one several weeks ago but haven’t heard back. I’m guessing they are too busy with the sale right now. But I definitely recommend getting one still as it is a very nice machine and has given me very minor issues only so far but I think that’s only due to my learning curve lol. I give this one my recommendation for sure.
@markcall96957 күн бұрын
Dude that is my next investment. So glad you got one so we can LEARN!
@Ashar_000115 күн бұрын
Eww brotha what is thaa
@nihalayyub398015 күн бұрын
For what?
@FreshStartCustoms14 күн бұрын
Just for fun
@jackiesmith857016 күн бұрын
Thank you. It only took a few minutes to assemble my RA2.
@FreshStartCustoms16 күн бұрын
You’re welcome
@AngieWilliamsDesigns23 күн бұрын
THanks for sharing this. I specifically was looking for what kind of foam I could cut with my glowforge. ANd… settings was a great bonus.
@virginiacoleman723025 күн бұрын
Thank you for this. I have had my Glowforge Pro for 4 years and have been considering this machine. I think this has me sold.
@FreshStartCustoms25 күн бұрын
You’re welcome. Feel free to use my affiliate link in the comments if you’d like to help the channel out. Also check out the WeCreat users group on facebook I run. We have a great community there.
@laserchop3D27 күн бұрын
I hope that means they will get shipped out soon been waiting for months.
@FreshStartCustoms26 күн бұрын
I’m sure they will
@charlenechoate1727 күн бұрын
How wide can you do?
@FreshStartCustoms27 күн бұрын
I cut my boards down to 16” but looks like it could be a bit wider still
@terrysimmons596927 күн бұрын
I can't find your notes on your Facebook page 🤔
@FreshStartCustoms27 күн бұрын
Unfortunately Facebook took the notes feature away. I made a facebook group called Fsc Glowforge settings that has the info now
@FreshStartCustoms27 күн бұрын
Here is the page: facebook.com/share/vF61ZEuPz6wdp2Yw/?mibextid=K35XfP
@rcworkman934329 күн бұрын
How would you take that square ai image and make it round to laser a coaster?
@FreshStartCustoms29 күн бұрын
Either add a circle cut over top and let the excess be wasted or erase using the image editor or using another program with more features
@rcworkman934328 күн бұрын
@FreshStartCustoms thanks for the reply. Can't bring the ai file into corel draw. Hopefully they will add a mask function soon.
@SCOTTNGA29 күн бұрын
A shame they didn't fix the bi-directional engraving on this new model.
@MatthewLeavitt29 күн бұрын
The 40w has worse engraving qualities ?
@FreshStartCustoms29 күн бұрын
You probably won’t notice the difference in most situations honestly but technically the 20w has a smaller focus point and could get a better engraving with higher detailed designs but it is unlikely you’ll be able to tell the difference most of the time.
@Schoendings29 күн бұрын
I went to the xtool site. I ask me how i can make profit Out of that? The musicbox is 49$ , than the cutting time and shipping to the customer. IT must be Sold for 100$ and a assembled for 150$ to have some profit. WHO will pay this in the world ? It is cool no way, but Not for resell and profit.
@FreshStartCustoms29 күн бұрын
At the time I wasn’t given prices but I believe they have some discounts for current members of their Facebook groups as well. This might help get the cost down for you.
@LemonLimes99Ай бұрын
I got a Basic unusued at $1500 last week! Love your videos!
@FreshStartCustomsАй бұрын
Thank you. Nice purchase
@dcaldwell816520 күн бұрын
Great deal. I love my Glowforge Plus however, due to unforeseen circumstances, I'm going to have to sell it. Would love ideas on where to list it.
@terrysimmons5969Ай бұрын
My set focus is not set to being able to open set focus. Why is that?
@FreshStartCustomsАй бұрын
Hmm not sure. You should just click the three dots in top left then click auto focus
@HMXForumsАй бұрын
Hey there, im interested on doing that on a pvc card
@FreshStartCustoms26 күн бұрын
PVC tends to be toxic to laser engrave. I don’t recommend doing it with that and the laser.
@TMUniversАй бұрын
What do you mean by score? Compared to cutting and engraving.
@FreshStartCustomsАй бұрын
Score is a line that follows a cut path that only engraves the line but doesn’t cut. If you check out my channel I have made a few videos on this subject that will explain it better than text.
@janesfavsvideosАй бұрын
Looks great
@lqmitchАй бұрын
Great video! Thank you 😊
@FreshStartCustomsАй бұрын
You’re welcome
@NimarielАй бұрын
I just bought an S1. I’d have struggled a lot between it and the new Ultra had it been announced a few weeks earlier, but I think I’m still happy with my choice. The S1 was a couple thousand cheaper and still has a significantly larger work area. I think starting out, it’ll be a great machine. If it ends up making a significant amount of money, maybe it’ll pay for another machine later on. The S1 also has safety features that either F1 can’t match due to the design, particularly the auto-shutoff when the lid is up.
@FreshStartCustomsАй бұрын
Yes the S1 is definitely a great starting machine to get, it is very close to my top pick as well. If it wasn’t for the speed of the f1 I would choose the S1 as my go too and the s1 wins out for size as well.
@FreshStartCustomsАй бұрын
Now if you can get both at the same time!! Then you have a dream team. Portable and fast f1 for shows and stationary s1 and work space for big projects.
@MischiefEngravedАй бұрын
Thank you man! Like others said, this is exactly what I was looking for!
@FreshStartCustomsАй бұрын
You’re welcome
@MileyonDisney2 ай бұрын
Very cool. Thanks!
@FreshStartCustomsАй бұрын
You’re welcome
@MileyonDisney2 ай бұрын
My biggest takeaway was SVG vs PDF. Thanks!
@FreshStartCustomsАй бұрын
Any time
@MileyonDisney2 ай бұрын
Thanks!
@FreshStartCustoms2 ай бұрын
Thanks for watching
@jimlincoln56172 ай бұрын
I’m brand new to this! Is there someplace for me to see how to use my own image? Thanks!
@FreshStartCustoms2 ай бұрын
I believe I did a video on the original software it came out with but I haven’t made a new updated version yet
@brianwalters82772 ай бұрын
Can we do stars
@FreshStartCustoms2 ай бұрын
Yea you can cut a star
@Silk19542 ай бұрын
How do you type your own text? "Hello" is getting old!
@FreshStartCustoms2 ай бұрын
Double click on the hello text then erase it and type something else in
@AmericanLibertyFighters2 ай бұрын
great video, can you possibly do a video on using the M1 to engrave on a curved object such as a wooden spoon or bowl?
@FreshStartCustoms2 ай бұрын
M1 is not designed to do curved engravings unfortunately. They can only do rotary engravings such as cups for a curved object since it rotates in place on the focus point.
@box_boi_howard2 ай бұрын
What if I want the letters cut out??
@FreshStartCustoms2 ай бұрын
Then you just turn the black fill color off and add a stroke color to the outside of the text
@crystalespinoza84532 ай бұрын
What is the difference between score, cut, and engrave?
@FreshStartCustoms2 ай бұрын
I made this video that will explain them better than I can through text, please check this out here: kzfaq.info/get/bejne/eLKWg6yDu8XXdHk.htmlsi=RwMzTlQ5qUFZx7hV
@alexaurbanik89202 ай бұрын
You mentioned you did this with the glow forge, which one was used? Also, what’s the max height that the object can be on both machines?
@FreshStartCustoms2 ай бұрын
I must have miss spoke if I said it on this stock specifically. But I have done this on both. The wecreat max height is around 6” and the Glowforge is about 2” with the tray removed for engraving only on both.
@lisatothelee72 ай бұрын
There's a rougher side of the pre filter material. Does it matter which side faces up?
@FreshStartCustoms2 ай бұрын
I don’t think so
@kitcatkraftsnkpop342 ай бұрын
I bought a svg file from Etsy and did this but when I go to cut it says bitmaps can only engrave! my first laser help
@FreshStartCustoms2 ай бұрын
It sounds like the file you have is a jpg or png bitmap of an image you would have to convert it to a vector to cut it out. Some files are intentionally an image only.
@lancetindall33672 ай бұрын
Nice video. Easy to follow and good basic information. Thanks!
@FreshStartCustoms2 ай бұрын
You’re welcome
@mojo26132 ай бұрын
Thanks for doing this!
@FreshStartCustoms2 ай бұрын
No problem anytime
@lordbmc36562 ай бұрын
Hey great video this helped a lot. Could you make a video going over a list of materials that can be used with the M1?
@FreshStartCustoms2 ай бұрын
XTool’s new software 2.0 has a massive list built in now. I recommend downloading the beta version to see them all. I will try to make a video on it too