Blender Conch

Пікірлер

@DrGroo 2 күн бұрын

very nice

@blenderconch 2 күн бұрын

Thanks a lot, Groo! I will finish the project... eventually :)

@blenderinatorist 2 күн бұрын

this looks amazing!

@blenderconch 2 күн бұрын

Thanks a lot! Glad you like it!

@trulgn 7 күн бұрын

When you passed the swords in how did you get a perfect greenscreen key removal (as guys were holding the sword ends) also did u model a 3d sword to materialise those effects around

@blenderconch 7 күн бұрын

Good questions. No greenscreen involved here. The camera is on a tripod and never moves, so I can take parts of the video where the helpers are not on screen and use that to cover up and hide the helpers when they are on screen. In the "composite reveal" part of the video, those coloured regions are the actual masks I used for that. For the swords and fingers issue, you are correct - I made 3D models of the swords, and the particles are pulled to the surface of those models. The 3D swords are never visible, but the particles are. If I recall correctly, there were enough bright particles covering everything that the transition moments where the helpers' fingers might have been at risk of being visible during the hand-off were a total non-issue. i.e. the fingers of the helpers did not really present a problem I needed to solve.

@trulgn 7 күн бұрын

Can you set axis rotations to the same keyframes to make it rotate on all axis at the same time?

@blenderconch 7 күн бұрын

Yes, that should work just fine 👍

@trulgn 4 күн бұрын

@@blenderconch ok so I reviewed this video again before I was going to start...........Then.......... (daunting prospect) do you have a website or blog somewhere where you can send the project file too. This is very complex. You have 6axis but how have you set them up. You show some detail but I'm blender user for 2 years and I don't understand. Would be easier if you had project file

@blenderconch 3 күн бұрын

@@trulgn Can do. Sorry - took me a while to find the old file, but here's one I think I used in the tutorial. I hope this helps. drive.google.com/file/d/1udfd5w6F59GFag_W8YDMRezzk58nPMbX/view?usp=sharing

@shaunswildlife 10 күн бұрын

Thank you, the finish button doesn't work for me Blender 4.1

@blenderconch 10 күн бұрын

Oh! Thanks for letting me know! Does this happen regardless of how you set up the shell, or did it happen on one particular shell only? If the latter, I may have some sort of edge case bug to fix, otherwise it sounds like I'll need to figure out an update for Blender 4.1. I'm still on 3.4.1 myself, but I might install 4.1 and try to come up with a fix maybe in the next week or so.

@shaunswildlife 9 күн бұрын

@@blenderconch oh yes , its just an edge case, the default shell finishes just fine, I'll change what I was trying to do, I probably made a line overlap the central axis.

@blenderconch 4 күн бұрын

(Sorry for the slow reply!) Sounds good. I hope some kind of tweak made it work for you. If you happen to know a way to reliably replicate the problem, please let me know. If I can repeat the error, I might be able to address it somehow in the code. No pressure, though - sounds like it was something subtle and rare.

@DrGroo 27 күн бұрын

Noice!

@blenderconch 26 күн бұрын

Thanks, Groo! My Blender addiction continues unabated :)

@dertobbe1176 Ай бұрын

Wow you made a generator 3 years ago and turned it into an addon. This is community stuff here ❤

@blenderconch 29 күн бұрын

Thanks for the kind words :) The community has taught me so much. I'm very happy to give back!

@johnwhittaker-tx1pd Ай бұрын

gorgeous thank you!!

@blenderconch Ай бұрын

Thanks a lot!

@GoatedTyrant Ай бұрын

This is a really well made tutorial

@blenderconch Ай бұрын

Thanks a lot!

@rtyjjjhyu Ай бұрын

It says that it is unsafe to download. Why is this? and has anyone else had this problem?

@blenderconch Ай бұрын

Chrome gives me the same warning (about the file being "executable") when I download it. I think it must be noticing the .py file extension, which is a plain text file that contains Python code - not actually executable on its own in the way that a .exe file is. I think the browser is just being overly cautious about what it considers a potential danger. If you're a programmer, or if you know someone who is, you can easily verify that there's no funny business in the Python code.

@makerspersona5456 Ай бұрын

Fantastic job :-)

@blenderconch Ай бұрын

Thanks a lot! 🙏

@makerspersona5456 Ай бұрын

Hiya, is the add-on on git-hub or anything? Would be interested in using it but unclear on the licensing terms?

@blenderconch Ай бұрын

Just a download link in the video description. No special licensing - it's free to use by anyone for any purpose.

@makerspersona5456 Ай бұрын

@@blenderconch Thanks for your generous contribution to the community

@blenderconch Ай бұрын

@@makerspersona5456 Happy to help the community - the Blender community has helped me immensely!

@BlueShot77 2 ай бұрын

Hello, Where is your contact

@AG_Druid 2 ай бұрын

this is really wonderful, thank you!

@blenderconch 2 ай бұрын

Thanks so much for the kind words 🙏

@AG_Druid 2 ай бұрын

woah

@BrycenLinn 2 ай бұрын

Ahh it so adorable!

@blenderconch 2 ай бұрын

Ha! Thanks 🙏

@user-vp8ok4ys6c 3 ай бұрын

I just realised that you can't really close of the tip. When making flatter snail shells with only 2-3 coils, there would be a big hole in the tip, adding an option to close this would be great for when creating lots of different shells

@blenderconch 2 ай бұрын

Thanks for the suggestion! I might try sometime to see if I can figure out how to automate that.

@user-vp8ok4ys6c 3 ай бұрын

you should include a few base textures that you can modify the color nodes of, so that people don't have to apply their own textures. This would make scenes with lots of shells much easier and faster to make

@blenderconch 2 ай бұрын

Also a good suggestion. Thanks!

@kaproductions777 3 ай бұрын

Bro ☺️

@user-kx1uy8hc3d 5 ай бұрын

thank you soooooo much !that's so helpful

@blenderconch 5 ай бұрын

You're welcome! :)

@sourabhyaduwanshi9016 5 ай бұрын

That was really awesome technique I hope u create more live action cg in future

@blenderconch 5 ай бұрын

Thanks a lot! I hope to do more eventually :)

@vfxgroups7060 5 ай бұрын

Super cool 😎❤

@blenderconch 5 ай бұрын

Thanks 👍

@kshitijagrawal125 6 ай бұрын

Amazing tutorial 🔥

@blenderconch 6 ай бұрын

Thanks a lot! 🙏

@noymulislamchowdhuryshorot7180 10 ай бұрын

Awesome 🎉

@blenderconch 10 ай бұрын

Thanks a lot, Noymul!

@jdchoreographer 11 ай бұрын

wow need more tutorials like this

@blenderconch 11 ай бұрын

Thank you!

@qedqubit 11 ай бұрын

best tutorial i've seen on how to make up 'properties' and use em for drivers 😀!

@blenderconch 11 ай бұрын

Thanks a lot :)

@psy3d_ Жыл бұрын

Just came from your old video. You're genius man!

@blenderconch Жыл бұрын

Thanks a lot, PSY3D!

@blaisegonsalves4536 Жыл бұрын

at 5:21 its showing me the value as 1 even though the value in my custom property is 6

@blenderconch Жыл бұрын

That sounds familiar. I think I may have seen this before. Does your version of Blender have the "Update Dependencies" button, like the one shown @5:21 ? If so, try clicking it. I hope that works.

@blenderconch Жыл бұрын

Oh, also - I have a free add-on for generating these shells now. Much easier to use than following this video. It's in one of my last few videos.

@joaopffg Жыл бұрын

Unbelievably good tutorial! I'm still having issues rotating my object (i´m new to blender). Is it possible for me to send you the file via e-mail? For what i saw online, this is a common struggle (rotating a child object relative to its local axis while the parent rotates arround a world axis). Thanks in advance and you just got a new subscriber.

@ianhunt7480 Жыл бұрын

For some reason I am having trouble with new wedges and subwedges either appearing disconnected if the value is too low, or if you set the value high enough to fix this the edges begin clipping into one another. Does anyone have an idea where I am going wrong?

@emdai Жыл бұрын

Sir, thank you very much for this tutorial, you are amazing.

@blenderconch Жыл бұрын

Thanks a lot! 🙏

@shishafabse9345 Жыл бұрын

Thank you so much! My future 3D printer will run hot because of a lot of different "snail houses" meshes. :-)

@blenderconch Жыл бұрын

You're welcome! Enjoy!

@raulkaap Жыл бұрын

I think this is how God himself designed conches.

@blenderconch Жыл бұрын

LOL

@queenofbread116 Жыл бұрын

For anyone who is struggling, I recommend pausing the video to take notes as you go along. It will help you make sense of everything and truly take it in rather than making you feel like you're just following steps that you don't understand.

@rahvin4242 Жыл бұрын

wow, just wow, good job, love the shader

@blenderconch Жыл бұрын

Thanks a lot!

@fankerry1512 Жыл бұрын

The magic addon，thanks you～

@blenderconch Жыл бұрын

You're welcome. Enjoy!

@lakshorts Жыл бұрын

Keep up the great work

@blenderconch Жыл бұрын

Thank you!

@vfxgroups7060 Жыл бұрын

❤️🕉️🔱

@blenderconch Жыл бұрын

Thanks 🙏

@DrGroo Жыл бұрын

Cool. An actor _and_ crew for this one. I didn't guess you'd done a prop hand in from the sides till we got to the behind-the-scenes. Very nicely done.

@blenderconch Жыл бұрын

Thanks! Planning to do more sword / staff / weapon based VFX in future. It certainly helps when multiple people are involved.

@64bitshit Жыл бұрын

noice

@blenderconch Жыл бұрын

Thanks! 🙏

@gamebossevolution559 Жыл бұрын

thanks, it helps a lot

@blenderconch Жыл бұрын

Glad to hear it! :)

@vfxgroups7060 Жыл бұрын

Breakdown please

@blenderconch Жыл бұрын

I'm not sure I'll do a breakdown on this one, but maybe I can put more information in the description about how each part was done. For me this was *all* about the tornado, and that was made following an awesome tutorial which I linked to.

@sporebryan2000 Жыл бұрын

That's really clever. But you can't forget one fundamental step. Sound design. Watch Polyfjord video about sound design, you'll never create videos the same way again

@blenderconch Жыл бұрын

Thanks for the constructive feedback! I really like polyfjord - I will definitely check that video out.

@vfxgroups7060 Жыл бұрын

This is real sword

@blenderconch Жыл бұрын

The little ones are made of aluminium and the big one is made of nylon. They're just training swords. Not sharp.

@vfxgroups7060 Жыл бұрын

@@blenderconch oooo okay I think this is a VFX 😅 thanks for confirmation lee ❤️

@sporebryan2000 Жыл бұрын

I bet it's indian Edit: indian confirmed lol why do you guys love so much vfx?

@vfxgroups7060 Жыл бұрын

😀🤩

@vfxgroups7060 Жыл бұрын

Wow awesome ❤️❤️🔥🔥🇮🇳

@blenderconch Жыл бұрын

Thanks!

@vfxgroups7060 Жыл бұрын

😀

@vfxgroups7060 Жыл бұрын

I like video song and i like your video best video lee

@blenderconch Жыл бұрын

Thanks a lot!

@drewmcbride3027 Жыл бұрын

Ｐ𝐫Ｏ𝕞Ｏ𝓢ｍ

@vfxgroups7060 Жыл бұрын

I want 0:11 And 01:13

Ең жақсы KZfaq

Пікірлер