@@MaxTor2112 The truth is, there really is no "right" one-size-fits-all order to doing the courses. It depends a LOT on your circumstances, location, industry, background and goals (which is why we don't provide any kind of guidance about that course order up front). But in general, my recommendation would be to start with my courses first as they deal more with project development. The other courses focus mostly on system integration, networking and protocols which are important, but hey: what are you going to integrate if you don't have a system yet, right? 😅 So start with PLC Fundamentals (Level 1), and hack your way through Levels 2-5 after that. Those are the biggest, longest courses in the bundle. By the end of those, I'm betting you'll be able to navigate your way through the rest with ease!

@@sorm3536 Hey, PLC is exciting stuff! Who could blame you?! 🖖😉

Hey, thanks for the suggestion! I just added it.

@@user-en2ue2sd2r You're pretty great too!

Fortunately, all PLCs use the same set (or subset thereof) of five languages based on IEC standards. So, basically, if you can program one PLC, you can program them all with minor adjustments along the way. 🖖😃

I want to start the course of PLC. Should I start all the courses or just basic courses shall be sufficient? What is the duration of the courses? Please also provide the details of prices and procedures to apply for.

@@faseehyousaf7795 Only you can answer what you need to learn and how far you want to go with PLC. You have access to the programs you're trying to understand. I don't.

Ok thank you Paul I want to learn and understand complete PLC

@@faseehyousaf7795 It's all there for you if you want it, my friend. Have a great weekend!

Like this: www.plcdojo.com/bundles/five-pack-without-the-basics

@@PaulLynn Oh Thank You! It was a Quick response btw :), Your course is engaging and excellent. I have mailed you regarding the certificate...Keep the good work going Paul...Best of Luck

@@pranav5532 Already replied. ✌️😏

Really glad it's all working out for you, my friend! I do my best to make this stuff very approachable for everybody.

Is that your teaching format?? I'm an electrician,...know of normally open and closed....just never grabbed the next step on the ladder to be exposed to control work, more of a electrical installation in commercial construction....looking forward to your course.

@@timoleary8732 New format? I pretty much stick with what works when it comes to teaching. That's not a formula I'm willing to tinker with all that much.

You're on the KZfaq channel right now. Seems like you got your signal back.

I meant the course where do I access it?

@@jeankalala8415 That's on www.plcdojo.com

Thank you

Glad you liked it! 🤩

Not for nothing I'm ex-AF. Maybe that's where we learned to tell stories? 🤩

In course 1, if you'll go back to section 1, lecture 2 ("Software and Course Notes") and give it a read, it will explain this and SO MUCH MORE.

I dunno why, but my heroes have always been sausage dogs. I model my whole life after 'em!

I've read it (once).

I'm pretty legendary as far as PLC instructors go. 😉 Feel free to look me up on Reddit or Udemy or visit my training website at www.plcdojo.com. Tons and tons of good stuff!!

We all judge and stereotype all the time. It's a basic survival mechanism. The sooner we acknowledge it and develop it into a refined skill, the better off we'll be.

Yeah, I'm migrating my domain to another host and it's a little wonky for the time being. Until the migration completes, I won't be able to modify the DNS. But no worries: you won't get your bank account stolen by reading text over an unsecure connection... 😁

True story. My courses are all online, self-paced, no time limits etc.. They're also the most reputable automation courses in the world for what that's worth. 😸 Hard to go wrong.

I can safely say that I don't have any videos on, "The Elevator System," inasmuch as I don't even know what it is. Sorry! 🙂‍↕️

@@PaulLynn I mean the logic that can give a little insight about elevator system used for vertical transportation works. Thanks

@@emeziepromise6084 Ah, gotcha. Well, I really don't teach how to program specific systems. I focus on teaching people how to make a PLC do whatevee they want it to do. It's up to them to figure that part out. That being said, anybody who's completely my first two courses should be able to EASILY program an elevator!

I haven't read that, but I HAVE read The 48 Laws of Power a few times, and that inspired a lot of my life philosophies.

And the best part of it is that this was probably the very LEAST you'll struggle through the rest of Level 2! 😀

Man, I really do appreciate the vote of confidence! And just like my courses, if you have any questions along the way, I'm always happy to try to help. 🤩

Heya! Simple answer is: TIA Portal is pretty much the only way to go. But on the bright side, it's pretty easy to come by and SUPER capable!!

Nice! You'll have fun learning this stuff and be surprised at just how easy it'll all be for you to pick up. Also, just a tip: you can save some money on my courses by getting them on www.plcdojo.com. ✌️😃

In the RSLogix 500 PLC programming environment, tags don't exist, so all memory resources used in your logic have to be accessed by their memory register addresses. B3 is the default data table for bits.

I like YOU too! 😜

Glad you dig it!

I hope it still proves useful for you one way or another...

The nice thing about working remotely (at least part time) is that is you're quick, there's no limit to what you can make. No kidding: I did a whole project (similar to P9 in Level 2) while my wife was out dancing one night and made $2500 in about three hours. Fun times. 🙂

Glad you liked it! ✌️😸

Hey Paul.. just wanted to share David Benjamin page. Check em out if you have a chance.. he's a good teacher on opening up old testament tora.. and showing Jesus all over scriptures.. blessing to you brother greetings from Southern California

Romans 4:4-8 King James Version 4 Now to him that worketh is the reward not reckoned of grace, but of debt. 5 But to him that worketh not, but believeth on him that justifieth the ungodly, his faith is counted for righteousness. 6 Even as David also describeth the blessedness of the man, unto whom God imputeth righteousness without works, 7 Saying, Blessed are they whose iniquities are forgiven, and whose sins are covered. 8 Blessed is the man to whom the Lord will not impute sin.

I was raised with those same doctrines and believed them for years before I started studying the Bible instead of just being fed contemporary-Christian religion from a pulpit.

@@PaulLynn yea . I too stepped away from institutional church.. they don't preach the true gospel... I think you would really like David Benjamin KZfaq teaching it's not your conventional teaching you hear behind pulpit but our full of truth.. highly recommend him.. Im actually on your page because I'm interested in hopping in to learning the plc trade/career.. thanks for your videos

@@lalogarcia6811 If you're interested in learning a VERY different perspective on the Bible than what you've heard before, you can check out the book I just published recently which paints a much more comprehensive picture (rather than just a topical study like this one). You can read it for free on my website or buy it on Amazon if you prefer. sixthmillennium.org/new-testament-old-context.html

No worries, my friend, you'll do just fine. But Level 2 is hard as hell, so get ready for that! The rest are pretty smooth sailing. ⛵

I never thought of doing that, but yeah - BRILLIANT!!

✌😁

Glad you're happy! ✌️😁

Oh, you're gonna HATE me by the end of that course! Good luck. Stay strong! ✌️🤩

It sounds like you might not be running ALL THREE apps as Administrator.

I'm not sure what "pop up table" you're refering to. When you load a valid 500 program, you should get a window where you can provide a station number (which should be 1). If that window isn't appearing, make sure of the following: 1) You created and started your SLC500 driver in RSLinx. 2) You created a valid 500 program, verified it and saved it. 3) You loaded that file into Emulate. 4) You didn't get any error messages when installing or running any of the three programs.

i dont have the option "workstation BEASTBOX" i really want to learn PLC but this is stopping me

@@akbarhidayat5755 Well, you definitely SHOULDN'T have BEASTBOX appearing on your computer. That's MY computer's name, and you aren't working on my computer, so we're good there. Did you add and start the SLC500 driver? Do you have a project open in Emulate? If either of those is a "no," then that's what you've skipped. Also, if you got any errors while launching any of the three programs, then you need to run all three as Administrator.

@@PaulLynn ive followed your instruction just like in the video, in rslynx its blank white after i clicked rswho. Update: i tried in rslogix micro to go online instead of choosing "who active go online" it works. Because when i choose "who active go online" its blank

@@akbarhidayat5755 Sweet! Glad you got it working. 🤩

@@PaulLynn thank you for replying :)

Just keep putting one foot in front of the other, and you'll get there! ✌️🫨

And you're getting paid right too I bet! ✌️😏