It's got alot more miles than that..speedometer was probably changed out at some point..they are known to break in these just like the transfer case shifter...be very careful with it as they are often hard to get into low and then the mount breaks...you don't want that!Keep it soaked in oil.
@KYTRUCKANDFORESTRY19 сағат бұрын
@@jimmillet1442id say that’s the original miles. I bought it from the original company, but I definitely will keep them soaked.
@jimmillet144218 сағат бұрын
@KYTRUCKANDFORESTRY I have a 97 F350 with the same exact seat and it has 237k miles and no where near that kind of wear on it.Just going by that.
@bluegrassnnawoods8198Күн бұрын
heat & A/C problems check the cabin air filter and duct work its probably full of saw dust from tree tramps leave n the windows down
@bluegrassnnawoods8198Күн бұрын
the forestry box is just too much the truck is loaded with the weight of the 75ft elevator add a load of chips the truck become slow and unruly. add a load of chips and a big chipper like a vermeer 1800 and it becomes downright sketchy.
@willterry12128 күн бұрын
Super clean truck.
@chrisfrancis556913 күн бұрын
hey, what year and engine is that? I'm picking up a 2006 250 with the John Deere turbo. at a steal because he needs to use quick start to get it going and the auto feed is down. this has been an amazing help in making my choice.
@KYTRUCKANDFORESTRY13 күн бұрын
@@chrisfrancis5569 2000 with a 4.5 John deer
@ryanwilson449714 күн бұрын
Lets go thats a huge win Don't even got that many miles, good deal
@user-nd5jo1xx1i17 күн бұрын
Super solid truck, glad you didn't have any issues with the new gas that goes bad in a month it seems like nowadays
@KYTRUCKANDFORESTRY14 күн бұрын
Yeah, I’m hoping I can find time to work on it
@biggus_dickkus4 күн бұрын
Gas is gas. It's all the same
@maycie_b19 күн бұрын
Great work
@jjmcq232724 күн бұрын
Old skid steer
@jimfacteau15024 күн бұрын
Great video. Thanks for posting. I have a hose leaking on my swing cylinder. Looking for videos on how to get the cylinder out whole just to get the hose off. Case 480E
@thesaltypaultard127126 күн бұрын
The colored zip ties is a brilliant idea.
@KYTRUCKANDFORESTRY26 күн бұрын
@@thesaltypaultard1271 thanks it makes it a lot easier going back together
@maycie_bАй бұрын
Outstanding job
@sobeefy1Ай бұрын
After an hour of him cussing and me searching the web for over an hour i found YOUR video and read the comments and we got that dang pin out 🎉🎉🎉🎉 thanks!!!!
@KYTRUCKANDFORESTRYАй бұрын
@@sobeefy1 you’re welcome. I think I’m gonna make another video on more detailed on getting that pin out.
@sobeefy1Ай бұрын
On the struggle bus getting the pin out!
@maycie_b2 ай бұрын
Great work! Always the best stuff! 👍🏼
@kevinwheat83982 ай бұрын
Thanks for vid. This will help me.
@KYTRUCKANDFORESTRY2 ай бұрын
Any time
@maycie_b2 ай бұрын
Amazing job! Always the best
@maycie_b2 ай бұрын
Awesome
@maycie_b3 ай бұрын
Outstanding job! 👏🏼
@JustinMiller-wz2pj3 ай бұрын
Is there a Part 1 to get to this point?
@KYTRUCKANDFORESTRY3 ай бұрын
I was super busy and didn’t get a chance to video the first part my GoPro messed up. Just let me know what you need help with.
@maycie_b3 ай бұрын
Amazing work!
@maycie_b3 ай бұрын
Outstanding work!
@yeriellopez-wl1yo3 ай бұрын
How to remove the pin
@KYTRUCKANDFORESTRY3 ай бұрын
The nut that’s on there keep cranking that down as you tighten it and it will pull the pin out
@KYTRUCKANDFORESTRY3 ай бұрын
And also if the nut bottoms out before the pen comes out, just loosen the nut stack washers up, and then it will pull at the rest of the way out
@yeriellopez-wl1yo3 ай бұрын
I try that I tied the nut has hard has I could but noting any other ideas
@yeriellopez-wl1yo3 ай бұрын
Thank you so much for your help
@yeriellopez-wl1yo3 ай бұрын
Any tip for removing the motor can’t pull it out
@raywhite40913 ай бұрын
Hey man Just wanted to say THANK YOU for sharing your experience It helped me out
@KYTRUCKANDFORESTRY3 ай бұрын
Thanks for the comment that really means a lot when I could help somebody out
@jogerluis94853 ай бұрын
Nada a ve, fala d+
@user-tq9pl5ou8y3 ай бұрын
Did someone say slay bc u did
@user-tq9pl5ou8y3 ай бұрын
888888
@user-tq9pl5ou8y3 ай бұрын
I can’t even see business anymore with u standing on it
@user-tq9pl5ou8y3 ай бұрын
Slay dad
@g-man79383 ай бұрын
Not much on the h.p., but a good heavy chassis. That 4wd is a nice bonus.👍
@KYTRUCKANDFORESTRY3 ай бұрын
I’ve had these motors in the past and they’ve been damn good motors really good on fuel, but like you said, ain’t much on power
@maycie_b3 ай бұрын
Always the best! 👏🏼
@chrisc.treemendous62443 ай бұрын
I found it thank you very much.
@KYTRUCKANDFORESTRY3 ай бұрын
No problem glad I could help
@Mr-er6fg3 ай бұрын
Beast!
@chrisc.treemendous62443 ай бұрын
Where the diagnostic wiring port on these bandit chippers? I having a issue on a 200uc that is running too high rpm. Like the governor isnt working.
@KYTRUCKANDFORESTRY3 ай бұрын
It’s gonna be up there close to the top of the engine where the main harness plugs in to the harness on the engine it’ll be a weird oddball plug
@maycie_b4 ай бұрын
Outstanding Work! Always on business 👏🏼👏🏼
@g-man79384 ай бұрын
That's a man's hammer right there lol. Hopefully the Taiwanese parts ain't quite as cheap as the Chinese, who knows. Sure costs enough.
@KYTRUCKANDFORESTRY4 ай бұрын
Yes it sure does thanks for for watching my videos. I appreciate your comments. I hope these last longer than the old ones
@Mr-er6fg4 ай бұрын
You got something good there!
@maycie_b4 ай бұрын
Outstanding job!
@g-man79384 ай бұрын
Lots of work, but it'll be badass when finished. Nice recovery on the chipmunk thing lol.👍
@KYTRUCKANDFORESTRY4 ай бұрын
Thanks hopefully I can get the thing up and running for long. I just got so many projects to do.
@TheIronDuke5024 ай бұрын
Wow, Those doors open and close amazingly well on the Ford cab. It’s ashamed that the newer vehicles get the “Droopy Doors” for the prices that they ask for these days. Where are you located at?
@KYTRUCKANDFORESTRY4 ай бұрын
Yep, that’s why only buy the older stuff. It always works out the best for me. I’m in Kentucky.
@TheIronDuke5024 ай бұрын
@@KYTRUCKANDFORESTRYYeah, I am located west of Lexington in Woodford County.
@KYTRUCKANDFORESTRY4 ай бұрын
Yep, I know exactly what you’re talking about. I used to drive a truck all through their years ago.
@g-man79384 ай бұрын
Gotta find some time to get on some of these projects, I know it's tough when you stay busy.👍
@KYTRUCKANDFORESTRY4 ай бұрын
Thanks hopefully I can get some more projects of my own worked on here in the future
@bombardier3qtrlbpsi4 ай бұрын
4:19 doesn't effect the door
@KYTRUCKANDFORESTRY4 ай бұрын
No
@maycie_b4 ай бұрын
Outstanding job!
@maycie_b4 ай бұрын
Outstanding work!
@user-tq9pl5ou8y4 ай бұрын
good job
@g-man79384 ай бұрын
You did a great job on the chipper.
@g-man79384 ай бұрын
Nice job on the paint, a man can't have too many skills. I agree single stage is the way to go, especially with equipment.👍
@maycie_b4 ай бұрын
Awesome work!
@alangillman23704 ай бұрын
I have SK800 with a leak on the rear LHS drive that needs fixing and this was very helpful regarding getting the tracks off so I can get to the drive unit. Thanks
@KYTRUCKANDFORESTRY4 ай бұрын
Look in some of my older video that I have and you will be able to see where I took the motor and stuff off if you need any more help just let me know