Did you build as boost your GE or is this an aristo?
@DKSLIDER862 ай бұрын
Fully built head ? or just cams?
@BakerE2 ай бұрын
Head was built by head games with a pocket port. All GSC valves, conical springs, shimless buckets
@Rolans_Auto_Works2 ай бұрын
Sounds amazing! Is that titanium or stainless?
@BakerE2 ай бұрын
Stainless
@MrdrdtC2 ай бұрын
Just a cam that’s tuned? Damn I need to do that. But seriously is the engine just cammed in this vid?
@BakerE2 ай бұрын
Pretty much. Tuned on AEM v2. Doesn’t idle like that all the time but sometimes.
@Supranforever2 ай бұрын
Damn, I assumed I was one of the few with 57cr's on this side of the country on a gs300, Not many of us! I have 18x9.5 front/18x10.5 rear +22 all around, I'd love to see more about your build man, mine is 2jzgte vvti aristo swapped too, 6766 precision.
@BakerE2 ай бұрын
18x9.8 +38 squared was all that was available when I bought these but I did extended studs and a 12mm spacer in the rear. It’s been lowered since this vid as well. I have a Driftmotion 6465 billet wheel
@Supranforever2 ай бұрын
@@BakerE Still killer brother!
@Supranforever2 ай бұрын
What are the specs of the build bud? What ecu/trans?
@one_waycarson93893 ай бұрын
Sounds mint
@kjam87gxp4 ай бұрын
Idk what I want to build Sc400 Sc300 Ls400 350z 02 z28
@azlewashington51324 ай бұрын
Does this have an upgraded turbo or anything or just the straight pipe and cams that made it sound like this
@BakerE4 ай бұрын
Single Driftmotion 6465 and tubular manifold as well. AEM ecu
@Itsme-mx5tl4 ай бұрын
Just cams and straight pipe? Other then that's stock? Sounds great
@BakerE4 ай бұрын
Single turbo and AEM ecu as well
@YagorFelipe6 ай бұрын
Wheel and tire specs?
@TravisRobinson-bw4ed7 ай бұрын
GOT DAMN DAT SOUNDS GOOD
@7prathamesh77 ай бұрын
Sounds fucking nasty. Love it
@MachineEnthusiast7 ай бұрын
I like that Toyota badge on there. Makes it more jdm… lol
@jayjackson89064 ай бұрын
It's a Toyota aristo...I think lol..Japanese gs300.
@swoosh310819 күн бұрын
you realise lexus is japanese right? istg tiktok car kids gotta stfu
@p_owlow8 күн бұрын
@@jayjackson8906 Lexus GS300 is just a nerfed Toyota Aristo
@toyotadude67718 ай бұрын
Hey, whats your wheel and tire size setup?? Looks perfect
@BakerE8 ай бұрын
They’re gram lights 57CR 18x9.5 +38 all around with I think 12mm spacer in the rear. I lowered it a little more after this vid.
@turbogears9008 ай бұрын
How do you like the aristo with cams
@BakerE8 ай бұрын
Love it! Need to make some more vids but it’s mostly been in the garage all summer
@turbogears9008 ай бұрын
@@BakerE more videos
@captainseth24038 ай бұрын
dude thta a toyota
@jomommafoldin300011 ай бұрын
bouta eattttt sounds mc fuckin nasty
@Juan-ic5wv Жыл бұрын
What's all done to it.? Thinking of getting these cams.what springs you use?
@BakerE4 ай бұрын
All GSC valves, conical springs and shimless buckets
@dylanbloodworth1491 Жыл бұрын
Hey man, is that a Alabama tag??? lol… I live in Huntsville and would love to talk to someone local about a GTE swap on my GS!
@BakerE4 ай бұрын
Yep I’m Bham!
@unboxandbuild5391Ай бұрын
Crazy also in Huntsville if you gained any knowledge and willing to share
@sergioherrera3029 Жыл бұрын
Straight piped or muffler?
@BakerE4 ай бұрын
This was straight pipe from turbo
@savagepaul- Жыл бұрын
What springs/ buckets did you end up going with ?
@BakerE8 ай бұрын
It’s all GSC and shimless buckets. All done by headgames
@LuddaTB Жыл бұрын
Build list?
@BakerE8 ай бұрын
Stock bottom end, Headgames head- pocket port, GSC valvetrain, shimless buckets, AEM v2,FIC 1200s, Walbro 450, driftmotion 6465, driftmotion built R154, driftmotion twin disc. Made 550 at 19psi on 93.
@804MRMAN7 ай бұрын
@@BakerEStock bottom end of what? A GTE?
@GroovesAndLands2 ай бұрын
@@BakerE Would love to see difference between stock cams and stock head vs. GSC cams and ported head. Mine did 470whp @ 17psi with stock cams, stock head and a similar size turbo.
@ryan4286 Жыл бұрын
Do you need a tune for a bigger cam? I’ve seen people say that you do but others say it will be fine
@BakerE Жыл бұрын
Yes it needs to be tuned.
@Mrgs3rd Жыл бұрын
Nice
@The_onlymaui Жыл бұрын
The cams make it sound like a 4 rotor
@irocjared9 ай бұрын
Not even close
@-hawtzauce-11088 ай бұрын
@@irocjaredman its not a hard stretch if you didn't see the vid an only heard it
@damiancarson7816 Жыл бұрын
Beautiful build👌🏿 what good is that?
@BakerE8 ай бұрын
VIS I believe
@Tech_Guy_87 Жыл бұрын
Wheels ?
@BakerE Жыл бұрын
Gram Lights 57CR- 18x9.5 +38 with a 1/2 in spacer in the rear
@user2917 Жыл бұрын
Very nice build keep boosting and be safe
@CmoneyGarage Жыл бұрын
Sounds good....how is the noise while driving?
@BakerE Жыл бұрын
Surprisingly quiet in the car. Wastegate is still wayy louder