Ppf is definitely easier to clean and maintain compared to vinyl. Ppf is self healing so minor scratches and swirls disappear on their own - with vinyl those scratches are permanent. I personally like gloss black. The satin black and dark grey are cool but there’s something about a shiny black finish on the cybertruck

It’s an awesome color! We have in-house software to cut all of our film and graphics

@@vaiadesign6320 Yeah, I see your shop in the video. Its really nice. We have something similar but we are primarily a sign company, One Up Signs. We don't do color change wraps, just commercial wraps for companies. I am getting a Cybertruck very soon as a company vehicle and we are going to wrap it here. We were just going to wrap it with full sheets but when I seen that you had cut them on the Graphtec, I was thinking of doing the same. I have the outline from Pro Vehicle Outlines but wasn't sure if I could use something like that to make the cuts. If you have it all set up as a cut file, I would purchase it from you. Let me know. Thanks! Brandon

@@Brand_One it’s actually all cut through our Ppf/tint software so unfortunately we can’t download/share the patterns. The nice thing though is that the cybertruck is really flat and easy to wrap 😁👍🏼 aside from the edges and corners being tricky - everything else is very straightforward

@@vaiadesign6320 No worries. I will probably just make a rough-cut outs on our program. We use Flexi Sign Pro for our desiging. Thanks for the quick response. Have a good one!

Yes we did 😁👍🏼

@@vaiadesign6320 oh wow isn’t already dark enough?! I have the new M3P and it’s already dark

@@SciolismHD yeah it has factory privacy glass but it doesn’t offer any heat rejection or uv rejection. Our film adds 98% IR heat rejection and 99% UV rejection for comfort and protection

@@vaiadesign6320 what % tint did you put for the sunroof? I do want uv protection so I guess I’m going to get it 🤣

PPF is awesome! Helps to keep it looking awesome for years and it’s so easy to maintain! We prefer Ceramic Pro over here but XPEL is cool 👍🏼

Rlyslow? 🫣😅

No, we are an individually owned location with our own processes and standards. Some locations may do pre-cut only, some might do modified precuts, or others may do fully custom hand-cut installations and then you have everything in-between. It's best to go to shops in person and check out their work. Pre-cuts are great and efficient and can often be made to look like a fully custom installation without the premium that a custom install comes with. It's all about discussing your expectations and concerns and finding a shop that is willing to deliver something that you will be happy with.

Always 1 piece 😁👍🏼

That video is dropping soon!

Thank you! This one is still one of our favorites

Tint definitely sets off the look!

@@vaiadesign6320 what is the percentage for windshield, front 2 windows, rear 2 windows, rear back and roof?

@@pitech4446 we did 70% on the windshield and sunroof and 15% on all four doors and the back glass

We did a seamless 1 piece install. It was our first one so it was a bit tricky. We got it figured out and dialed in after the 4th attempt lol

We’re working on offering a windshield Ppf. They are tricky though - it’s an expensive install and most films are only warrantied for 12 months

We use a combination of iron removers and barkeeper’s friend stainless steel cleaner to remove those tiny rust spots 👍🏼

it felt weak in the performance at the showroom for me. felt good on a rwd that i test drove. idk

We did remove the badge. We wrapped it in a satin black vinyl and then reinstalled it 👍🏼 Amazon has some good metal badges 😁👍🏼

@@vaiadesign6320 can you black out the TESLA test on the rear as well? How do you think it’ll look

@@SciolismHD they also sell those on Amazon. We have installed the black Tesla letters on the previous gen model 3s and it looks good 😁👍🏼

@@SciolismHD kzfaq.info/get/bejne/iL50p7mg37LSoKc.htmlsi=HcGk4g9FLVk7Bhra

May you send a link on good quality 2024 model 3 badges for front and back from Amazon please?

They’re definitely an acquired taste! lol But the tech is pretty impressive!

5万以上的车不贴膜不高级的。。。

Yes we did! We wrapped it in satin black to match the other trim on the car 👍🏼

Oh interesting! I had not thought about that. We do use door and dash protectors to cover and shield any panels/lighting from water. I’m sure any residual moisture would dry and cure out over a few days

You can use the same chemicals you would use for paint. You can even apply spray waxes and sealants if you’d like. Our Ppf is infused with ceramic pro’s coating which makes it really easy to maintain and care for

@@vaiadesign6320 thank you

Not quite 10k. Maybe half that 😅

Hey! We’d be happy to get you estimate. Shoot us an email - [email protected] and we’ll get you some info

@@vaiadesign6320 how about you just publicly say how much is it for a 2024 M3P as in the video?

@@nomansland120 bro be professional - every car is different, they're not going to publicly say random numbers! Jeez man lol

@@sigabiz Every car is different? I specifically asked about a Model 3 Performance. They just showed a video where they did it. Only reason why they don't disclose is to get yhour contact information - and because thei rprices are too high so people will laugh in the comments

@@nomansland120 I’m sure every business would ask you to inquire, they’re not going to publicly post their prices on a KZfaq comment man, it’s just now how you go about it… prices can change always

It was a bulk install 👍🏼 I don’t believe anyone has patterns for this one yet

Thank you! We did 15% on the doors and back glass and 70% on the windshield and sunroof

@@vaiadesign6320 why 70% on windshield and sunroof? visibility, preference, or is that the legal limit?

@@Starship_X a bit of both actually. 70% is the legal limit and our ceramic tint blocks 99% of ir heat. We can go darker but we leave that to the customer

This was using our 15% on the doors and rear glass and 70% on the front windshields

@@vaiadesign6320 how much for the package?

Nope! Just a little baby shampoo and water so it’s fairly mild and odorless

Pricing varies depending on a few different things. It’s best to give us a call so that we can give you an accurate estimate.

Please shoot us an email and our team will help get you some pricing for your vehicle: vaiadesign.com/contact-us/

At least $5k

40k

@@vaiadesign6320 nah nevermind

PPF packages start at $700 for our front bumper package. It ranges up from there depending on the level of coverage. Give us a call for a quote tailored to your needs!

Yup! We add it to all exterior surfaces. It adds UV resistance, chemical resistance, and extreme hydrophobic properties for ease of cleaning. Most top tier PPFs have a ceramic coating infused into them already but those coatings typically last 9-12 months. Our dedicated coating application on the Ppf ranges 3+ years depending on the number of layers we apply

@@vaiadesign6320 do you think the new PPF color wraps have ceramic coating infused with it?

@@SciolismHD it depends on the brand! We have used stek, UltraFit, Ivios, and purePpF so far. All have had very good hydrophobic top coats.

Right???

Thank you! It is our favorite one so far 😁👍🏼