HI SCHMIKELS dint See an email or a way to contact you ? . do you have a way ?
@schmikels_garage6 күн бұрын
@@GRASSINCLASS my email is [email protected] I didn’t realize I didn’t have those in my profile. Thanks for letting me know I’m going to add my email and my IG and Facebook links sometime soon.
@frias228711 күн бұрын
Nice 👍 👍 👍
@gxwsr466519 күн бұрын
I need some help with my camshaft, I took off the stock camshaft at tdc marks with the cam gear and when I try to install the street savage camshaft with the golden eagle cam gear the cam gear keeps going off tdc. Help me I’m new to this
@schmikels_garage19 күн бұрын
@@gxwsr4665 what do you mean that it goes off tdc when with the golden eagle gear? The cam is installed and you go to put the gear on and the timing marks or off? If so can you just turn the cam or if that’s what is happening can you put the stock gear on with the cam already installed and are the timing marks lined up? What d series are you installing the cam into? Also if you are not using a z6 cam gear it won’t work the savage cam is a z6 so if that golden eagle gear is a Y8 gear that’s your problem.
@gxwsr466519 күн бұрын
My issue was that I was installing the street savage cam with the golden eagle cam gear on the camshaft already. And when I tried to put the rocker arm assembly on it wouldn’t sit flush and the cam gear would turn every time I try to make it sit flush, because aren’t you supposed to have the cam gear at tdc then tighten the rocker arm assembly down. Or am i doing it wrong the whole time
@schmikels_garage19 күн бұрын
@@gxwsr4665 yeah that’s what ya do but it will turn when it’s tightened that’s fine just once the rocker arms are all torqued just rotate the cam to tdc it only moves a little and isn’t a big deal it won’t hurt anything when it moves
@schmikels_garage16 күн бұрын
@@gxwsr4665 one other thing I just thought of that I didn’t mention is the adjusters for the valves on the rocker arms should be all the way out that will help with it turning the cam but more importantly when you are torquing it there is less cha be if snapping the cam from u even pressure
@LouieLouGarage8821 күн бұрын
OOOO i get so excited for Schmikle videos
@Tulski_RR118422 күн бұрын
🤙🤙🤙
@notone402922 күн бұрын
Been a Hot minute since any new videos. Good to see you post finally. Yeah personally had BAD Luck with Skunk2 I mean Junk2 . Sounds like your old Skunk2 cam gear was sub par as well. Can’t go wrong with SpeedFactory though , BEST of the BEST !!! 👍🏻🔥🔥🔥🔥
@deelee3462Ай бұрын
Hello, how are these bulbs holding up? Do you think the quality of the light has diminished over time? Such as they got dimmer overtime? I had a pair of cheap H11s on a different car low beam only which stayed on often. The color of the light itself was nicer than halogen. However the throw/intensity of the light wasnt any better than the Halogen. Sometimes im wondering if the lights even do anything. The street lights around me seem to be doing enough work. This was after half a year of use? Thanks for any feedback
@schmikels_garageАй бұрын
@@deelee3462 I like mine a lot they have not give me any issues. The color of the light sometimes is hard to tell if it’s on when there are bright street lights but they have not dimmed at all I actually bought a pair for my other car I liked them so much. They are a little more expensive than the cheaper ones these go for about $80 but I recommend them
@deelee3462Ай бұрын
@@schmikels_garage Thank you for the response. I dont think I purchased the absolute cheapest ones. I got some middle shelf product. I look at the design of all the various products before making a purchasing decision. I try to do in depth researching by looking at the LEDs in the chip, how they dissipate heat and other factors. Since these are Hi/LO its kind of important to have quality in this department. As with a stand alone lo and high I can change between them to get home. Your answer does seem reassuring.
@popclutch_100Ай бұрын
Does anyone know what rear seats fit in 92-95 civic coupe?
@thegillfamily8704Ай бұрын
Good info. Now to do it on my Sup! Cheers.
@iinobodyllАй бұрын
What’s your thought on the power tune dash since you’ve been using it for the past year
@schmikels_garageАй бұрын
I absolutely love it, esp cause the price isn’t terrible and it does everything the other dashes on the market do. I preordered the new 10.4” dash they are releasing July 1st for my other car can’t wait to try that one as well!! The tech support is also top notch!!
@iinobodyllАй бұрын
@@schmikels_garage I appreciate the response going to buy one
@crypto-surg17502 ай бұрын
Where is your protection for the gastank incase you get hit from behind
@schmikels_garage2 ай бұрын
I’m going to build a rear crash bar
@HelloHello-hd3ds2 ай бұрын
Hey I’m really sorry have a couple questions if you could help me. I got the ame harness and my car has no wiring at all and I got a chipped ecu with laptop running all that but I’m confused on how to connect it to power. I know this sounds stupid but where does the ecu get power from. All I have is that eBay connector. Also how does the distributor coil get power. The harness has starter signal but where does the starter get power, I know from the key but how to I wire the key into, Can I just tap the wire and add one from the key, I’m so confused.
@HelloHello-hd3ds2 ай бұрын
What is the connector called for the sub harness I don’t have the relay box anymore and was going to make my own for the fuel pump wiper fan coil but how does the distributor get power
@HelloHello-hd3ds2 ай бұрын
Also my harness has a connector called rev which I though was for the distributor do you happen to have a clue what’s it for
@schmikels_garage2 ай бұрын
You need the sub harness to get power to those items and the rev connector is reverse on the trans
@HelloHello-hd3ds2 ай бұрын
I see thank you for the help your the bomb I read some diagrams and think I’m getting a small understanding. The ecu on my needs 12v from a25 and b1 right I only have this connector and I’m gonna cut the c101 plug and just make my own wire harness from there
@hannonen97402 ай бұрын
Hey,im going use that turbo on my bmw 1.6 engine. What ar you are running on hotside? Im thinking to go 0.63 or that 0.82.
@schmikels_garage2 ай бұрын
I have a AGP turbo .63 housing that I just port matched the t3 gasket and that deff helped with some spooling also and I put a o ring on the compressor housing and rtv all the compressor housing bolts to stop all boost leaks it had stock
@hannonen97402 ай бұрын
@@schmikels_garage it still keeps powerband up at high rpms with that small exhaust side? I have rally sprint style cam (292°/12.4mm) on my engine so hoping see power band some where 4700-8500rpm.
@schmikels_garage2 ай бұрын
@@hannonen9740 yes power doesn’t drop off I have the same turbo on my b16 and holds great to redline of 8500 and on my d16 with a speed factor cam which is 430 lift and I redline around 8200 which I think I can raise cause it still seems to make power up there. This turbo is good at holding the power esp over the g30 series they seem to drop off when you read the turbo graphs
@hannonen97402 ай бұрын
@@schmikels_garage nice. Still have 3 different turbos on mind. 1. Holset hx35 pro mfs (5860) 2.s257sxe (5761) 3.s258sx-r(5861) Compressor graph looks pretty good on that borg sxr.
@schmikels_garage2 ай бұрын
@@hannonen9740 I’d vote for the s258sxr!! I want one my self haha
@Mastermindyoung142 ай бұрын
@15:20 if you start the cut from both sides, when it goes through it won't chip the edge
@schmikels_garage2 ай бұрын
Awesome, thanks for that tip deff will do that next time!
@kanjonate4133 ай бұрын
Or get pieces from a integra
@efbrian3 ай бұрын
nice work bro!!
@TheBrijet4203 ай бұрын
Good job Jimmayy
@schmikels_garage3 ай бұрын
Thanks dawg
@MigdaliaMarin-ff4ju3 ай бұрын
That radiator comes with a relay kit. Do you recommend installing that kit. If so, how do you connect it up. I have a b20b. I've noticed in other videos. They were just connecting the fan directly to the stock plug. No relay. Being that the fan is different than stock. Without a relay. Wouldn't that Cause app draw. I've seen that happen in other videos. I noticed you have a relay. Please helps me With your suggestion.
@schmikels_garage3 ай бұрын
Yes it does come with a relay but I would t use the relay they supply. Deff wire in a relay but I would get a 40 amp relay. Try to buy a relay that has the relay with a plug they are real 40 amp ones ones without plugs are 30 and sometimes 20 amps they mark are 40 amps. You wire the relay with the old fan wire power and ground to trigger the relay. Then take a inline fuse with 40 amp fuse from the battery positive to the relay then use the 4th pin on the relay for the fan ground and use 10-12g wire for the battery power and the 4th pin ground
@k20_cartel993 ай бұрын
Where did you get the little adapter for the shifter cables?
@schmikels_garage3 ай бұрын
I got it off someone from AUS of a honda acura awd forum on FB I can’t remember his name. If you can try and scan the QR code it may bring you to a website or give you info to contact him. Or look up youngstatic he modifys a bracket that’s basically the same as the one I bought when he puts a billet shifter in his red crx it’s a couple year old video also
@Fackler913 ай бұрын
I have notifications on for you, but i never get them. Got to catch up on videos
@schmikels_garage3 ай бұрын
Thanks a bunch for the support!! I have 3 videos I need to edit so hoping I can get to them soon to have some more content for ya! 😃
@Fackler913 ай бұрын
@@schmikels_garage looking forward to it!
@jairoavina23674 ай бұрын
Will this work for the coupe as well?
@schmikels_garage4 ай бұрын
Not 100% sure but it might and you may not have the gaps on the bottom of the seat to the plastics like the hatch does
@captainyologameryt31994 ай бұрын
Manual swap on the way?
@schmikels_garage4 ай бұрын
Maybe some day but deff easier to do burnouts with the auto haha
@VtecEcky4 ай бұрын
Where u bought that weld on joints? And what is the measure
@schmikels_garage4 ай бұрын
I forgot the website but you can get them on eBay just type the part numbers in and they should pop up
@Toast.4204 ай бұрын
Bro what hood are you running my buddy ran the same one and now I want it !
@schmikels_garage4 ай бұрын
Carbon creations it was much cheaper than seibon and I got it when wait times for seibon were crazy. I got it off eBay but the front figment to the front bumper isn’t the best and I had to cut a hole for the hood prop to go. But other wise it’s not to bad of a hood.
@gorfind67304 ай бұрын
Great hanging out with you. Nice work. I also have a 95 ej1 so looking forward to more content.
@schmikels_garage4 ай бұрын
Thanks!! Should be some more vids soon!!
@PookieBuilt4 ай бұрын
This video is awesome motivation!! Just found you and I’m happy I did
@schmikels_garage4 ай бұрын
Glad to hear it, thanks!!
@notone40294 ай бұрын
Been on the lookout for a new video. Links on the doich connectors? Please. WOW you work @ Honda. NICE BTW. Why did you go link instead of Fueltech? On Hondata Kpro4 now and want to go Fueltech after AWD on my 94 EG hatch K20 boosted. Also as far as the K series cheap hundred dollar ebay ChinaChong engine subharness they are NO GOOD! The ECU side pinouts were WAY off and just cheap sensor connectors. Had to spend the $360 for Jackspania one. SO.......
@schmikels_garage4 ай бұрын
Oh thanks I forgot to add those links I’ll do that in the next day, I chose link cause it was much cheaper and is plug in ecu no harness need to be made and does everything the fuel tech can do for what I need. I also don’t like how small the fuel tech screens are
@schmikels_garage4 ай бұрын
I finally added the connector links
@LouieLouGarage884 ай бұрын
Hell yeah mike! looks great! Nice new welding table too!
@playerinpink4 ай бұрын
Looks fire af I love watching your videos man I’m trying to clean mine up like this
@albertrosa524 ай бұрын
Looks great 👍 😊❤
@dgpgarage92915 ай бұрын
Hahaha this is awesome, the neighbors must love you
@schmikels_garage5 ай бұрын
Hahahaha
@noonecareswhenalltheydo5 ай бұрын
go to hobo freight and get a stepper bit. Drill out the bottom retaining plate one more size so the injector rests on the lip that below the lower o-ring. Or make a new plate out of aluminum that will hold the injectors over the holes and isnt as flimsy as that small piece of sheet metal. get at least 1/4 or 3/8.
@phantasy20755 ай бұрын
do people tell you it doesnt sound like a d series? it sounds so different lol
@schmikels_garage5 ай бұрын
I have heard something similar before haha 😃
@user-mp7hz7po4h5 ай бұрын
What fluid you used for ultrasonic cleaning
@schmikels_garage5 ай бұрын
I started with some Amazon ultra sonic cleaning fluid and ended with using berrymans b12 fuel injector cleaner. I have found out recently tho that any on the shelf injector cleaner with pea or pib which have longer words I forgot how to spell but those chemicals clean the best and I found royal purple max cleaner has 5% pib so I’m going to try that next time
@vvvv-lu8zi5 ай бұрын
Hi im not here to bug you . Im always ready to learn Im getting confused by your math.. If you could explain me please? Here what i find with my math You got around 20ml in 4 sec 1 minutes ( 60 secondes )is 4 sec multiply by 15 ( 15x4 =60) Your 20 ml x15 = 300 Your injectors is about 300cc/minute 300÷10.5 = 28.5 lb/hr
@schmikels_garage5 ай бұрын
The 4 seconds thing is wrong in the video. Near the end I start to test then a 15 seconds times 4 and times that by 4 again. The way you get it on a machine you can runs for a full 60 seconds is you run it for 60 seconds and times that number by 4. I can’t that’s why I have to split it in 15 and I was getting around 75ml in the 15 seconds. So 75ml x 15sec is 300. 300 x 4 =1200cc
@schmikels_garage5 ай бұрын
For the lbs you would take the cc number you got 1200 and divide my 10.5 which is 114lbs/hr
@schmikels_garage5 ай бұрын
Actually I’m wrong haha, you would only times the 15 seconds times 4 I guess which makes the most sense cause 15x4 is 60 for min. So I guess my injectors are still really messed up or that machine doesn’t flow enough cause the pump is only supplied 6v max I may make another video putting a regulator on and 12v to pump and see what happens
@PhillyMK34 ай бұрын
@@schmikels_garageyour supposed to flow wide open which I believe your machine doesn't do.
@cristianmorales37835 ай бұрын
from one bald man to another! just shave that hair off bro lol
@axelmoiseslaham4525 ай бұрын
Aun le queda ..sino ya hubiera fundido metales sucede q no llega a la varilla y marca 0 xdd
@Mi-chal5 ай бұрын
why do you multiply by 4 twice. the first time because it's 15 seconds long, but the second time?
@schmikels_garage5 ай бұрын
The first 4 is to get to 60 seconds and the second I can’t remember what the reason was but that’s what the equation calls for from all the info I found to find the cc, if you wanted to find the lbs/hr you would multiple by 4 if ran for 15 seconds then divide by 10.5
@Mi-chal5 ай бұрын
I want to buy this machine to check flow by 3bar.. I have a injectors but don't know what flow cc in 3 bar :(
@schmikels_garage5 ай бұрын
@@Mi-chal dang that stinks but atleast a machine is cheaper than new injectors. You could also send them out to a place for about $100 and have them flow and cleaned and then can tell you what cc they are
@noonecareswhenalltheydo5 ай бұрын
@@Mi-chal look for online conversions. Google is your friend.
@Drunken_Hamster5 ай бұрын
Kinda wish you had room for a dose pipe. This is the exact turbo I would use for my hypothetical car build, and I love the loud whistle of the T51r mod, but I also like the stututu sound of no BOV AND a length of pipe on the intake. (You need the pipe to get the stututu, otherwise it's just basic boring flutter). The reason I ask is that from what I understand, ported/anti-surge housings don't dose as well. They either do "normal flutter" even with a dose pipe, require 2x the boost to dose the same as a straight housing, or make chipmunk noises instead of having that drawn-out first note. At the same time, I've heard ONE car with T51r that doses how I want, but the owner hasn't responded so far, so IDK. It could also be a "small turbo" thing wherein the smaller turbos do the chipmunk crap, which is, again, why I wish you with a (comparatively) small turbo (and engine for that matter) could test it. But sadly, with the way your turbo is clocked on that manifold, I don't see it happening without you removing your driver's side headlight so the pipe has somewhere to go. (There are "rules" in what shape/config of dose pipe actually works, and the ideal setup is either a long-sweep 90 with at least 2x the diameter in length on either side of the bend, or just a straight section 3x-4x as long as the diameter.)
@mlrable5 ай бұрын
You should reherse
@frias22876 ай бұрын
Nice job bro 🔥
@jfavreau38326 ай бұрын
So can I do with conversation with my original civic engine? And I assume you are swapping out the front diff with another? Which one
@schmikels_garage6 ай бұрын
Yes you just would need to get an awd trans for what ever engine you have so if it’s a d series it would need an awd b series trans and d2b setup or I’ve heard there are some awd 5spd hrv trans but kinda rare. I have a crv b series trans in my car
@TheBrijet4206 ай бұрын
Really good angles! Did you use your security cams to do that? For the musical cars part.
@schmikels_garage6 ай бұрын
Nah phone and go pro haha
@LouieLouGarage886 ай бұрын
Hell yeahhhhhhh!
@drivingdaily5826 ай бұрын
Very nice civic, clean, great color, I like it.
@schmikels_garage6 ай бұрын
Thanks!
@danielhoard52616 ай бұрын
Ive learned a lot from your build and am going to use the same fuel cell setup as you so thanks for that. Also, ideally the flex fuel sensor should be as close to the injectors as possible. Will that matter? No idea but i just know that is recommended by haltech at least.
@schmikels_garage6 ай бұрын
Awesome glad to hear that! I’m not sure about the placement honestly I could see there being maybe a slight variance in the rail vs line maybe for temp but I don’t think it would matter that much but I only use the sensor for the content reading I don’t use it in my ecu cause when I’m on e85 it’s till the end of the season
@lowrider4life2136 ай бұрын
Nice 👍 just got some rsx rear seats super clean leather black about to throw them on my Eg hatch
@schmikels_garage6 ай бұрын
Nice!! They deff will look better than the stock ones!!