Contact us 📱800-543-1212 🌐 www.diamondliners.com/ 📧 [email protected]
@beavergunsnroses3258Ай бұрын
What is that?
@DiamondLiners29 күн бұрын
That is a valve ball, one of a part in a Graco spraygun. We have them in stock in California and Texas if you need!!!
@DiamondLinersАй бұрын
Contact us 📱800-543-1212 🌐 www.diamondliners.com/ 📧 [email protected]
@aaarrh610 ай бұрын
Great facilities and wonderful people
@stephanustweedale859811 ай бұрын
Promo SM
@aaarrh611 ай бұрын
Diamond Liners facility is perfect for these events. The plural component pumps they have are the latest and greatest. It is a killer set up with a nice roomy booth to safely spray multiple coating systems quickly.
@aaarrh611 ай бұрын
Dudley is a legend. If you’re serious about polyurea and other protective coatings this is THE benchmark.
@dudleyprimeaux380611 ай бұрын
Nice testimonial!!!
@tracyragle6147 Жыл бұрын
You guys are awesome
@SteveWrightNZ Жыл бұрын
No air = instant catalyze and set inside the gun hehe
@acculyticsgroup7750 Жыл бұрын
how much is the wastage, if we apply over a flat surface without any gaps (1 Sq M)? And material consumption in 1 Sq M? Thanks!
@americangroundskeeping6619 Жыл бұрын
how many gallons used?
@thethreelemons40912 жыл бұрын
How do you get the stone look although the Polyurea is black?
@TheOneTrueNeravarOfOoo2 жыл бұрын
So, it's best to leave the tip soaking in carb cleaner or acid overnight? Does that help prevent buildup throughout the day or ensure the tip is clean at the beginning of the next day?
@lightning92793 жыл бұрын
What is that yammering on about. The work window of polyurea is seconds. It's near impossible to put fabric on freshly sprayed polyurea.
@jasonHadley4203 жыл бұрын
hopefully someone love scraping lol
@epoxy2uaustralia5163 жыл бұрын
What kind of gun setup are you using? Tip size etc?
@billtabbert86324 жыл бұрын
Good day, what pump did you use for this?
@DiamondLiners4 жыл бұрын
This was an old video with and older equipment. The machine used probably a Glascraft MH2. Today, we would use a Graco HXP3 with the P2 Elite with the Chopper attachment.
@naginaakbar1964 жыл бұрын
U helped to know more about supplied air respirator
@mattstrom53484 жыл бұрын
I use the old style half mask with the googles SAS SAFETY sells, because they seal around the top of the mask perfectly and when the goggles get all scratched up I just use a new set of them! I really only use this for the occasional rustproofing of my truck, once in spring and once in fall. The pump does seem to be quite reliable, and durable. I bought my Allegro, supplied air system on ebay years ago used and got lucky with it still having tons of life left in it. Everything is user friendly, replacing the carbon vanes is easy and the filters are a quick change as well. Part of my pump is a cast metal, so I do not store it in a damp place or it will corrode up on me. I have bought parts for it through Ideal supply, where I live in Canada and have saved on shipping rates. I have the 1/3 hp pump and it weighs about 33 lbs. I mounted it to a solid rubber block for anti vibration and bolted it through a 12"x 12," 3/4" thick plywood base for more stability, using 4, round headed bolts, recessed in and coming up from the bottom. Make sure that the intake filter on your pump is far from your spray or contaminates or it will suck it up and feed it back to you! There are different lengths of hose to consider if the 50' one is not long enough. My pump has a mole hair filter on it and I cover that with a empty toilet paper role with top end sealed, when not in use to prevent it form gathering dust also if you have a cat it may rip it to pieces for fun because it is very reminiscent of a mouse. Also Make sure that the hose and mask are always connected to the pump before you start it or damage may occur. There it a date code sticker on the top of the pump with the last to digits being the year of manufacture. For myself personally I found the medium half mask to be a little too big for my face, with the straps not being able to adjust as snugly as i would like. In the future I may seek out one in size small if it exists. If you set the pump up on a chair or something off the ground, make sure that you do not yank on the hose causing the pump to fall off! When I used the unit for some spray painting, I found that after I bought some disposable goggle over spray protectors from SAS, that I was about to trace around one, on a roll of clear plastic film and cut it out and make my own make shift ones, using several little pieces of scotch tape to secure it to the front of the glasses! All in all for the price I paid, I really like it, for me it is low maintenance and is a huge step up from a filter type mask in terms of breathing comfort and I am very happy to have it.
@andrewmiller78864 жыл бұрын
Only 10 passes?
@hoangngo78475 жыл бұрын
Graco E-10 can't spray polyurea because the pressure is low, Graco also recommend that Graco E-10 and E-20 arre not designed to spray polyurea, just spray polyurethane foam
@DiamondLiners4 жыл бұрын
You are correct, however: The E-10 will spray polyurethane that only requires 1,500 PSI spray pressure, we have done it.
@rosseygi5 жыл бұрын
This is not variable ratio foam. This is a demonstration of the Graco Fusion Clearshot spraygun and its variable flow valve. To fuck with off-ratio formulas you'd need a special delivery system.
@777fiddlekrazy5 жыл бұрын
that is A LOT of material placed on a two foot piece!! COSTLY!!!
@ramihage38385 жыл бұрын
What is the intake air pressure for the machine
@DiamondLiners4 жыл бұрын
The machine does not use air pressure, the spray gun uses 80-120 PSI.
@plexafci6 жыл бұрын
we have also that solution. does not require such cleaning at all. www.wintermann.eu
@chumbrega26 жыл бұрын
Hell of a pattern 👏🏻
@noahcameron57455 жыл бұрын
chumbrega2 I was just about to say the same thing😂
@nguyenlechi79486 жыл бұрын
Please which kind of gun you spray for Sonic Head?
@viliblna5 жыл бұрын
Nguyen Le Chi I think it’s an extension of a normal plu. gun
@DiamondLiners4 жыл бұрын
We used a Graco Fusion Mechanical Purge static mix with a solvent flush.
@TufRiverboards7 жыл бұрын
well..... did it make a nice top coat/clear coat or not really? does the polyaspartic resin feel rubbery or similar to a Epoxy resin?
@nathanlamont47737 жыл бұрын
If it is anything like the gel-coat that I use its finish is really smooth and hard like resin (generally white unless tinted) It is the same stuff that is used on the outside of some boats as well as water slides. Hope that helped
@DiamondLiners4 жыл бұрын
Yes it did make a nice top coat and it is similar to the Epoxy Resin.
@codybonar7677 жыл бұрын
someone's not wearing their PPE
@donaldschmitter96958 жыл бұрын
i once used liquid nitrogen to schrink teflon seals easy repair
@WebsterA8 жыл бұрын
give it a sec. lol
@SergioHernandez-dm5oj8 жыл бұрын
que producto es ese que lo limpia muy bien
@DiamondLiners4 жыл бұрын
If it is ISO that is not hardened, the Global Specialties Products NZB: www.diamondliners.com/NZD-ISO-FLUSH
@marekscekuls62349 жыл бұрын
Benjy - he is legend in industry!
@MyronJackson9 жыл бұрын
Nice series of videos. Who's SCBA are you using?
@FarukTok9 жыл бұрын
www.ikincielmakine.com
@K0gashuk09 жыл бұрын
I have checked diamond liners.com and see all sorts of equipment for sale but absolutely no material. Where do I get this material once I purchase this no heat sprayer? The reason I ask is that almost all polyurea manufacturers say at least 160deg heating temp for the spray system with recirculation at the gun. Yet, you are spraying this at room temp and leaving a link to just the equipment. I am very happy with the system I have been using in my addition from sprayez.com but at some point I am looking to refit my house and this looks a little less messy. I can still get my foam from them with a graco e8p. However for doing polyurea on a sidewalk or garage floor I might need this type of option. You all are leaving out a bit of info it seems.
@DiamondLiners4 жыл бұрын
Give us a call we can point you in the right direction with the material. 562-781-1045 ask for John.
@ramirosolis238910 жыл бұрын
how much air pressure and cfm does a graco XP1 require
@AlohaEnergy11 жыл бұрын
Why post this video of a demo failure?
@samuelquijano411811 жыл бұрын
Precio para Lima-Perú.
@DiamondLiners12 жыл бұрын
yes it can spray foam and polyurea but you can't fill the tanks all the way otherwise the foam will froth at the top.
@aleksroga12 жыл бұрын
can this machine spray PU foam and polyurea ..i mean not at the same time.of curse?????
@DiamondLiners4 жыл бұрын
The E-10 will spray polyurethane that only requires 1,500 PSI spray pressure and it will spray foam.
@DiamondLiners12 жыл бұрын
01 tip
@VOTE4TAJ12 жыл бұрын
What size of tip you use. 00 or 01.
@DiamondLiners13 жыл бұрын
It is a Graco Fusion Mechanical Purge (MP) Spray Gun with a Solvent Flush Attachment with a Reversa Tip on the end.
@linerman113 жыл бұрын
Hi....is that a Fusion gun with a reverse-a-clean tip on it or ???? Pretty Cool......