I have a similar poplar/tulip. It will land on my neighbor's house if I screw up. My throwball got stuck so I can't make any progress today. Just ordered two more.
@garybythesea11 күн бұрын
So happy to see you back with another great video
@dougfreedom520015 күн бұрын
Cheaper to buy a new electric winch.
@terryhale900615 күн бұрын
Generator would add to the cost.
@osbaldohernandez917417 күн бұрын
This man made so many good point especially about the a machete is made for green wood not dried up and he is correct with green wood it’s easier for the blade to go through
@donmoore778519 күн бұрын
Wonderful work, and explanation. Love how that strip of bark kept the tree alive. My guess was no kickback. I have had several trees fracture that were dead as they hit obstructions on the way down.
@alexfenton22923 күн бұрын
After explaining various dangers, I cracked up when he reappeared with a band aid on his forehead. 😅
@rickstephens113026 күн бұрын
I enjoy your video, my experience with cutting trees that are leaning and depending on the types of tree it is? Especially cedar's are suseptic for splitting up the trunks, is to stay consistent with the cut and follow through. The faster you are able to cut? It will be less likely to split up the trunk as quickly? I put the question mark in place because if your saw isn't very sharp,it won't cut as fast. Im not saying that only to see how fast you can cut, but yo have control over your cut. I hope this makes sense? The idea is that you want to make accurate cuts and stay alert and stay in the back cut as much as possible to ensure that the fiber's are cut quickly. If you are unsure if it will split then use safety and use a chain or a strap or a rope and wrap the trunk of the tree so it won't split up the trunk and prevent possible injury
@dionysus200626 күн бұрын
Good video on the technique but use snatch blocks and steel cable instead of rope for safety.
@enriquemartinez1627 күн бұрын
Absolutely positively outstanding! Thank you very much, Sir.
@blakefollett29 күн бұрын
You had me interested until you called your bar a "Blade"...8:00
@hanginlaundry360Ай бұрын
Greetings from dystopian 2024! Thank you for a great video with no irritating music!!!!
@terryhale9006Ай бұрын
Thanks! I like your handle. Would be a great one for a skier who only does double black diamonds.
@Press2EscАй бұрын
Finally a real engineer (vs a KZfaq certified wannabe).. I was a chip designer. so not much trig and mechanical physics req'd for sub-micron wires & transistors... Besides, our "outdoor work" was camping, skiing, hiking, bicycling, snowmobiling, boating, etc., etc. My kudos to your excellent job with the video instruction Terry. By choice, I don't design chips anymore, but I've designed a few ad-hoc "systems" since, that always exceeded the clients expectations. Albeit you agree that the easiest way to get an engineer to do something they don’t really want to do was to tell them that it’s impossible or it cant be done!!! <grins> Continued success...
@donmoore7785Ай бұрын
Magificent!. I know you through tree felling videos, but this is a whole other animal. Kudos to you and your ingenuity.
@terryhale9006Ай бұрын
Thanks, Don. The new pond seems to have sealed itself enough that it is keeping at least some water year-round. Unfortunately, the exposed virgin soil does not seem to be liked by the wildflower seeds I have been spreading each Spring. A few flowers are making it, but it's not nearly the colorful meadow I am waiting for.
@SooperTooberАй бұрын
Plz post more content if possible on anything- I learn so much from the way you think and problem solve
@SooperTooberАй бұрын
You are brilliant 🎉🎉🎉
@jackdawg4579Ай бұрын
A giant set of log tongs might have been an alternate solution, or nailing it into one of the slots already cut in the log with the saw, but on the backside, so your rope was part way around the log and was imparting a rolling force.
@jackdawg4579Ай бұрын
I'm also a blacksmith, it is a lot of hard work upsetting steel that size by hand. I made a similar wedge using a piece of 45mm square trailer axle, which is a medium carbon steel. First I cut the wedge shape in roughly using a lot of angle grinder cut off disks, going from 45mm at the struck end to 20mm at the business end, before putting it into the forge to refine it and then heat treating it. It is way to heavy to keep in your normal felling kit, but I have it if i need it.
@donmoore7785Ай бұрын
It seems most all the trees I take down have no branches to toss a bag over. So I use an extension ladder. And a shorter length of rope, most likely. Yes, less moment arm as a result.
@terryhale9006Ай бұрын
Just out of curiosity, what species of trees are you talking about? I have seen some pines in the south that are basically a pole for the first 60 feet.
@lashlarue7924Ай бұрын
This has got to be the absolute best tree-feeling content on all of KZfaq. Buckin' Billy and TreeSon are great for hands-on, but this goes deeper into the engineering of it all. Folks, I think the main reason you hire a pro to handle a backleaner around a structure has to do with three words: "Licensed, bonded, and insured". Even though we may not be completely incompetent, the decision to tackle certain trees around one's own house would be akin to performing your own brain surgery - only the foolhardy would ever attempt it. Terry thank you so much for sharing your considerable expertise with us, thank you from the bottom of my heart.
@c0nstantin86Ай бұрын
5:11 "damage to the stuff you wanna keep alive" 😬😬😬
@ilikedirtbikes007Ай бұрын
Thanks for sharing!
@steadyeddie7453Ай бұрын
This video should be called," When Trees Unite and Revolt". Very well done.
@JoshNoss2 ай бұрын
My neighbor used a ladder to climb up into a large maple tree and straddling a branch, sever said large branch with his chainsaw. The branch then proceded to fall and stike his ladder knocking it from the tree (as well as destroying it) leaving him some 20 feet up in the tree on the branch he decided to sit on to make his cut. With no way to climb down the large tree, he was left to sit there several hours until I came home. I now get paid to do the tree care work. Very informative as well as entertaining video Terry Hale. Thank you.
@terryhale90062 ай бұрын
Ooooh. That was a harsh lesson. Thanks for sharing.
@dylancowmeadow42802 ай бұрын
When I cut the tree and it starts moving, I want rope that keeps pulling in the right direct for 15% of travel. Rope that becomes slack after 2% movement could let the tree stall and fall left or right.
@terryhale90062 ай бұрын
That's reasonable if you're not going to be actively pulling on the rope. Bear in mind, though, that the amount of pull will drop off rather quickly as the tree begins to move.
@farkroy2 ай бұрын
The butt of your axe tapers to a point that may be to thin. Be mindful when using that axe to strike steel wedge. or if accidentally hit something harder than AVS
@OmahaLasse2 ай бұрын
I just became mesmerized with the stuff in this series! I am definately going through these and crunch the numbers before going to attack any bigger trees.
@OmahaLasse2 ай бұрын
I love the maths approach! Exactly my cup of tea!
@OmahaLasse2 ай бұрын
This was exactly what I needed to see. I got a good few widowmakers in the forest that I need to be clearing out before the spring gets properly on its way. REALLY important to see a tutorial that has setbacks all the way so I can start copying the ropeworks approach for securing the hanging trunks. Still need to be doing a fair bit of overkill safety on my problem trees but at least I don't have that grape stuff growing here, just trees hanging from trees.
@terryhale90062 ай бұрын
Sounds like a lot of work. Good luck to you!
@CFWaittoleave2 ай бұрын
Terry brings to our attention that wisdom comes with age. The know it all tenderfoots that do something in the outdoors and have suddenly become enlightened is typical. Tiresome are the primadonnas who usually are loud because they innately know no one is listening. Thanks for your great video Terry.
@mbztechgoogle2 ай бұрын
Very helpful. Thank you.
@terryhale90062 ай бұрын
Great!
@naturewatcher75962 ай бұрын
Very good explanation and warnings about some dangerous situations for newbies who could be unaware of them. I have two trees growing at the angle and I thought they are the easiest ones to fell. Now I need to watch videos about leaning trees to know what could go wrong.
@terryhale90062 ай бұрын
Yay! Congratulations on being one of those who exercises a bit of caution before undertaking that might prove painful or worse. I have a couple videos on leaners, but there are others who are also trying to protect people.
@rmgf10052 ай бұрын
THANX for the video. It's excellent !!
@terryhale90062 ай бұрын
Great! You must have/had snow where you are.
@waynekarjala20322 ай бұрын
Never saw a chainsaw with a blade.
@terryhale90062 ай бұрын
I also slip and call roots branches.
@Garysopinion2 ай бұрын
You did not mention how to get the rope high on the target tree. I use a bow and arrow with a string.
@terryhale90062 ай бұрын
Definitely the way to go for the really high stuff. I can reach about 80 feet with my Bigshot sling shot. That's usually sufficient for here in the northeast, but not always.
@Garysopinion2 ай бұрын
The wedge I look for has groves in it such that you could put 2 wedges together and they will not slide sideways.
@Garysopinion2 ай бұрын
Not sure how I can use the info. What I have is a bunch of dead trees (re emerald ash borer). want them to remain vertical to dry until I need them for firewood. Now when the wind blows them over, I want them not to fall in one direction which is toward the house (they are not close). Another tree not to fall on driveway. I figure if the hinge is made perpendicular to the unwanted direction it should fall parallel to the unwanted direction. Not sure if I should just cut on either side of the tree with a straight cut or wedge cuts.? not sure if I explained that.
@gianni73972 ай бұрын
*promosm* 🙌
@RogerBays3 ай бұрын
I'm not an arborist, but wondering if anyone has thoughts about the following. It seem that getting a plunge cut in the right place is tricky, just a slight error could mess up the hinge width and make it too narrow on one side or too high or too low on the far side. So is it prudent or sensible to use the following sequence: 1. Make the plunge cut. 2. Make the notch using the knowledge of the whereabouts of the plunge cut as a guide. 3. Finish off the back cut from within the plunge cut.
@terryhale90063 ай бұрын
The process is actually easier on a larger trunk than on a smaller one. On a large trunk, you can plunge through well back from the hinge, see where your bar emerges and sneak carefully towards the future hinge. On a small trunk, you could easily plunge either too far towards the hinge or too close to the trigger strap. Doing the notch afterwards is really tricky as it can be hard to align the two required cuts to meet at exactly the location you want. It can be pretty hard to control the angle so you get the convergence you want. This is the reason you will often see cutters fussing to clean up the notch cut.
@RogerBays3 ай бұрын
Thanks for replying @@terryhale9006
@sfor3 ай бұрын
It's been a long time, nice to see you again.
@auhmsoogood3 ай бұрын
What pully is he using in the video? Is it ratching to keep the tension, I'm assuming the original man isn't responding to these post considering it's almost 10 years old.
@terryhale90063 ай бұрын
He is still responding. Not a special pulley by any means. Progress was simply tied off.
@auhmsoogood3 ай бұрын
@terryhale9006 ah, ok, he had mentioned that he was trying to add 3-400 lbs of tension to the line, I assumed that it was some sort of locking pully to keep the tension in place. In my experience, which is limited when I've been adding thr tension it easily will slip off. Also, the follow-up question is the line that you are using "static" or "dynamic" I have been using an old climbing rope which is dynamic, but with its stretch it seems more difficult to keep the tension. But I imagine that using a static line with loads this heavy could be problematic and potentially incredibly dangerous. But it's just a thought.
@petebusch90693 ай бұрын
For me, a ladder, tree, and chainsaw equals the branch getting mad and knocking me off the ladder everytime. I gave it up.
@hubby-tubadventures013 ай бұрын
Education. Fear, Trauma. One package. Well done. 👍
@voidthewarranty14293 ай бұрын
If I use a ladder it's only to get up into the tree, and I then use my belt harness & lanyard to loop around the tree truck so I'm stable and can have both hands free for my chainsaw. Good rule of thumb is to be above the limbs you are cutting rather than below. For a 'branchy' tree, I'll cut the lower branches first, leaving a foot or so of stub still attached to the tree to stand on, and work my way up. Once the top-most branches are trimmed, I'll work my way back down trimming the remaining branch stubs back to the trunk. Leaning your body away from the tree while wearing a harness feels super freaky, but it gives you the most stability when using a chainsaw.
@larryspiller66333 ай бұрын
It never goes well when you mix the 2.
@brianworley77053 ай бұрын
Somehow my notifications didn't work to let me know you released a new video. I am happy to have it suggested in my feed. Good video. I have used a ladder when other options weren't available. One a friend wanted to support my ladder as it tipped a bit. He did so, but the chainsaw came down near him when the limb cut all the way through. He quit holding the ladder for me, for which I was relieved of him bring out of the danger zone. Close call that is not forgotten. Thank you, Terry.
@lucfournier82223 ай бұрын
so happy to hear your content,,!
@GreatDataVideos3 ай бұрын
Just watched a video entitled *"Man goes flying off a ladder"* that demonstrates exactly what you're saying.
@markblevins66613 ай бұрын
Pro you are going to get somebody just off a ladder
@threefeetofair7583 ай бұрын
I'm only 2 minutes in and I'm captivated
@samfeldman15083 ай бұрын
Before I tried pruning a tree from a ladder with a chain saw, I would have thought this overkill with safety. Having had the exact thing happen as described I realized this is an excellent video. Lucky I’m here to view it.
@terryhale90063 ай бұрын
Sorry to hear you had a close call. I'll hope you avoided any serious injuries.
@samfeldman15083 ай бұрын
@@terryhale9006 thanks. I did. I’m pretty sure I used a lifetime of luck up. I did soil myself but otherwise nothing injured but my pride. Haven’t tried again since then. I may be dumb, but not stupid.