Пікірлер
@tvtoms 8 сағат бұрын
I made a DIY press from vice grips and two tiny magnets that works OK, but not great. The press with plastic ball looks great. The screw is even better.
@slotcardude68 8 сағат бұрын
@@tvtoms thanks for stopping by!!!! Highly appreciated!!!!!!
@SlotCar2021 22 сағат бұрын
That rolling road is great, where can you buy them from? This looks good for tyre conditioning too, get heat in tyres then apply oil and keep doing that. I think I am going to add more weight to my cars, do you find you have to turn the brakes up because of the weight Nico? Great job ❤
@slotcardude68 19 сағат бұрын
@@SlotCar2021 thank you Paul! Check the text to the video, I added homepage, Facebook group and KZfaq channel of SlotSpoils for the rolling road.
@SlotCar2021 13 сағат бұрын
@@slotcardude68Amazing thanks Nico. I also agree that cars need to be set up on a wood track. Last time I trued my tyres and set a car up on Scalextric track. When I took it to the wood track I noticed the tyres weren't 100% true so plastic tracks are more forgiving.
@slotcardude68 13 сағат бұрын
@@SlotCar2021 👍💯👍
@milohajek 22 сағат бұрын
Like #15 AWESOME SIGN!!! Great addition to any track in my opinion. Have a great Day Nico
@slotcardude68 19 сағат бұрын
It absolutely is Milo!!!!!! 💯👍
@Scale_Slotcars_Latvia Күн бұрын
Great looking billboard Nico 👌
@slotcardude68 19 сағат бұрын
💯👍 thank you Harry, yes it is!!!!!!
@RichsSlotcarRoom Күн бұрын
cool billboard Dude!
@slotcardude68 Күн бұрын
@@RichsSlotcarRoom thank you so much!!!
@OKSlotCarTesting Күн бұрын
Dude! You made that? Very cool man!
@slotcardude68 Күн бұрын
@@OKSlotCarTesting no not made by me. It was made by youtube.com/@darrenhall6400?si=XFYm7LQ3Zlj09GTg
@trackfanstv Күн бұрын
Loving your work brother!
@slotcardude68 Күн бұрын
@@trackfanstv thanks brother, wanted to see you dance again!!!! 😳🤣🤣🤣🤷♂️🤯😳🤣🤣🤣🤣
@robertsale6528 Күн бұрын
Superb Nico, mine has pride of place on my layout 👍👍👍
@slotcardude68 Күн бұрын
@@robertsale6528 thank you Rob, mine is at my H0 track!!!!
@electronics.unmessed Күн бұрын
👍👍👍 Hello, I've made some Arduino electronics for our slot car track: lap counter with special functions, measuring speed and acceleration. We used it to measure on our track. Now my question to you and your community would be: What is the typical maximum speed and maximum acceleration in this class?
@slotcardude68 Күн бұрын
@@electronics.unmessed hi, depends on the motor and the Voltage/Amps available! Can be up to 3 Amps per lane, even more with H0 cars or Dragster!!! There it can be up to 8 Amps per lane!!!!
@electronics.unmessed Күн бұрын
@@slotcardude68 OK, we have standard Carrera124 cars on our track. Some are tuned a little. We are driving with a maximum of 18 volts. I think, we are in the 3 to 5 amp class with that. We reached a maximum of 25 km/h and a little over 3 g, or 30 m/s^2. Does anyone have any values for comparison?
@slotcardude68 Күн бұрын
@@electronics.unmessed H0 Dragster: 12V, 5Amp, 40mph on a 3m track
@electronics.unmessed Күн бұрын
@@slotcardude68 Wow! That is pretty fast. I was just doing the math quickly: this corresponds to 5,3g - cool! Thanks for the insights!
@slotcardude68 Күн бұрын
@@electronics.unmessed 🙏🤷♂️🤟👍🙏
@SlotSpoilsSlotCarTracksi-hb5ml 2 күн бұрын
I like your Rolling Road, one of the earlier models :)
@slotcardude68 2 күн бұрын
🤣🤣🤣 thanks for watching and stopping by!!!!!! I got it used from a guy in my area!
@Spunky678 2 күн бұрын
Quit question best product for cleaning 1/32 track .
@slotcardude68 2 күн бұрын
Which product: Carrera, Scalextric, Ninco, Polistil,.....?
@Spunky678 2 күн бұрын
@@slotcardude68 scale flex getting rust at the connect point. Now my track is in the garage.its summer time now but a wet weather and I am seeing rust
@slotcardude68 2 күн бұрын
@@Spunky678 I don't have any experience with Scalextric track at all......., heard about the rust problem! I am sorry, but I haven't got any idea in this topic at all, as our Club only has Carrera track and a routed track.
@Spunky678 2 күн бұрын
🏁💯💯
@slotcardude68 2 күн бұрын
🙏👍😎🤟😎👍🙏
@bills7974 3 күн бұрын
Yes Slotcar Dude... A lot of details. That is Koooool!!
@slotcardude68 3 күн бұрын
Glad you like it!!!!!
@danredsand 3 күн бұрын
Great video and super helpful Dude
@slotcardude68 3 күн бұрын
I am glad that it is of help!!!!!!!! There is a Part 2 as well!!!
@pats-slots 3 күн бұрын
Nico……. You are amazing mate
@slotcardude68 3 күн бұрын
Why is that Pat??🙏😳
@pats-slots 3 күн бұрын
@@slotcardude68 your knowledge and the way you set your cars up wow cool🤟🤟
@slotcardude68 3 күн бұрын
@@pats-slots 😇😁😎🤟😇🙏 Thanks Pat!!!!!
@boykinater 3 күн бұрын
Always informative, entertaining, and appreciated. Looks like a very good race club. Cheers! 😁
@slotcardude68 3 күн бұрын
Thank you! Our Club consists of more than just one track!!!!
@boykinater 3 күн бұрын
@@slotcardude68 I am still looking in my area to find a club for racing. So far no luck, but I shall persevere. 😃
@slotcardude68 3 күн бұрын
@@boykinater good luck and keep on looking!!!!!
@Scale_Slotcars_Latvia 3 күн бұрын
Nice looking green car .wow I wish I had a club to go too . Great job setting up the car for racing 😊
@slotcardude68 3 күн бұрын
Harry, thank you, trying my best and trying to share the infos as well!!
@slotcardude68 3 күн бұрын
P.S.: isn't there a track at some kind 9f motor museum in Latvia??
@Scale_Slotcars_Latvia 3 күн бұрын
@slotcardude68 there is a wood track in Riga motor museum but I don't know if it's used and they only race those silly super fast cars with the undetailed bodies ...not something I would be interested in at all and over 3 hours away driving non stop ✋️
@slotcardude68 3 күн бұрын
@@Scale_Slotcars_Latvia ah okay! Just picked it up somewhere in the net I guess......... Wing cars are different to scale cars, no doubt!!!!!!
@Scale_Slotcars_Latvia 3 күн бұрын
@slotcardude68 there isn't a tradition of racing cars of the type we are into in Latvia .we have a few wood tracks in colleges which are firstly used for educational purposes . I've never heard of anything but very unrealistic fast cars being used on them . If you check the page Baltic championship you will see what's raced. I rekon it goes back to soviet times when you couldn't buy the slot cars we love .And you still can't buy 132 slotcars in latvia 😪
@SLOTCARHUB 3 күн бұрын
Good job 👍
@slotcardude68 3 күн бұрын
Thanks, still timkering on the T290.
@milohajek 4 күн бұрын
Like #17, I LOVE the Lola T-70, especially in 1/24 scale. That green one you have looks very classy.
@slotcardude68 3 күн бұрын
Milo, I fully agree!!💯👍👍
@milohajek 3 күн бұрын
@@slotcardude68 I really want to make two specific cars, a 1/24 Scale Porsche 919 Tribute edition and a 1/24 Pagani Huayra.
@SewfastSpeedway 4 күн бұрын
That’s a pretty neat machine you have there for motor run in and watching for wheel alignment and balancing 👍
@slotcardude68 4 күн бұрын
Can be found here youtube.com/@slotspoilsslotcartracksi-hb5ml?si=cD4hrkKaF6Eo59sc
@slotcardude68 4 күн бұрын
And here facebook.com/share/FAyP4hGEkvefQipg/
@SewfastSpeedway 4 күн бұрын
@@slotcardude68 Thanks for both the links👍
@slotcardude68 4 күн бұрын
@@SewfastSpeedway he also has a KZfaq channel with more products, link in the text to this video!
@bills7974 4 күн бұрын
Very good at explaining on what exactly comes with the kit and all good advice. Well done video Slotcar Dude.
@slotcardude68 4 күн бұрын
Thank you and thanks for stopping by!!! Highly appreciated!!!
@OKSlotCarTesting 4 күн бұрын
Dude! What a slotcar! Indy 1928! Can't wait to see it run!🏁
@slotcardude68 4 күн бұрын
Thank you, will take a little.......
@Spunky678 4 күн бұрын
🏁💯💯
@slotcardude68 4 күн бұрын
🙏👍🤟😎👍🤟🙏
@ted.slotcardaddy 5 күн бұрын
Cool Dude 😎😎😎
@slotcardude68 5 күн бұрын
Thank you for stopping by!!!!!!! Your support is highly appreciated!!!!!!!!!!!!
@danredsand 5 күн бұрын
Great to see this. Can't wait to see you bring it to life
@slotcardude68 5 күн бұрын
Thank you, will take a little.......
@milohajek 6 күн бұрын
Like #3 I've got that song stuck in my head now 😅
@slotcardude68 6 күн бұрын
😁😎🤟👍👍🤷♂️👍👍
@milohajek 6 күн бұрын
@slotcardude68 Thanks, Nico. Have you seen Harry's garage track setup that he's been building? Also, what do you think of my "Royal Purple" Midget Racer? The video premiered this morning (Friday 06-28-2024)?
@slotcardude68 6 күн бұрын
@@milohajek yup, the 4lane looks great!!!!!
@darrenhall6400 6 күн бұрын
Looks Awesome Brother 👍
@slotcardude68 6 күн бұрын
Thanks Daz!!!!!!! Give great light too!!!!
@robertsale6528 6 күн бұрын
Lovely Nico, I might have to get me one of those 👍👍👍👍
@Spunky678 7 күн бұрын
🏁💯
@slotcardude68 7 күн бұрын
🙏😎🤟👍🤟👍
@Ce13423 7 күн бұрын
cool😀
@slotcardude68 7 күн бұрын
Thank you!!!! 💯👍
@twolinesslotcars 7 күн бұрын
Looks great! 😮
@slotcardude68 7 күн бұрын
Thanks Marty!!!💯👍
@SlotCar2021 8 күн бұрын
This looks like a harder kit to build but I think I will be amazing when done.
@slotcardude68 8 күн бұрын
Thanks Paul!!!! Yes it looks like a little challenge....!!!!
@MPSlotCar 8 күн бұрын
Amazing kit Brother! Cant wait to see this beauty come together! 🙌🏻
@slotcardude68 8 күн бұрын
I'll do my best, will take a little because of too many projects on my workbench......
@pats-slots 8 күн бұрын
El dudearino man you always get these great kits and cars from all over the world can wait to see what you make of it I’m sure a spectacular piece thanks mate and thanks for the shout out 🤟🤟
@slotcardude68 8 күн бұрын
Thanks a lot Pat and always welcome!!!!!!!
@shermaddictedtorc8540 8 күн бұрын
nice car will check their site thanks for sharing
@slotcardude68 8 күн бұрын
🙏👍🤟👍🙏
@PNWSlotcarDad 8 күн бұрын
Nice find brother, can't wait to see it go around the track. Happy racing 🏎️
@slotcardude68 8 күн бұрын
Thank you, will take a little, so many projects on my table.......
@3roomsraceway612 8 күн бұрын
Will be into see it completed and how well it runs on the track
@slotcardude68 8 күн бұрын
Will take a little.......
@SewfastSpeedway 8 күн бұрын
I love this style of car and look forward to seeing you assemble it and have it running laps on the track 👍
@slotcardude68 8 күн бұрын
Me too!!!!! Will take a little until I will start this kit, too many projects on my workbench.......