What does something like this cost and how much weight could it hold please comment back? Thank you very much for this video

Can u pls contact i want this

00:10

I know it seems stable but I think I'd sleep better if I had the top of the bike hooked and strapped to one of the side holes on the bed of the truck.

Unbelievable how many ridiculous comments in this comment section😂

This design is so nimble. Love it. I have the older one. The older one is built like a tank with an excellent paint that is the best in the business. I use my carrier to transport my two BMW r1200 gs, Ducati 1198 and RC51. Now I am trying to see if I can transport my Harley RK.

Nice video. I have the older model (gray color) which weighs lots more. For my full-size gm truck, it puts my tongue weight to the limit. I normally carry a BMW r1200gs and sometimes a Ducati 1198. Because of my 600lbs tongue weight limit, I opted in getting a heavy-duty 2.5 hitch with a 1k lbs rating. Not cheap but a true piece of mine for me. For my Harleys or other bikes. I use a Kendon dual full-size trailer. I tend to use the mototote WAY more than the trailer. Just more convenient. Remember the rear light kit. In California, police will mess with you if you do not have them.

A alguien más le dió risa el sonido del 2:27 ???

10:27 IMMEDIATELY LETS GO

How did you strap down the pegs?

I see a lot of people carrying 250 lbs bikes on their smaller cars (under 3000 lbs). If I adapt a high class hitch to a small car, do you think I could carry a regular size bike (say a 3100 lbs Prius with 135 hers-purrrs VS a 350 lbs CBR300)?

The rims of your truck are very beautiful...❤

OK, nice installation. Once the Ducati is paid for, take your truck in for a set of polyurethane shackle and spring eye bushings. They'll take that HORRIBLE squeak out and tighten up the suspension in the rear. It can be a DIY job, too. Then redo the video and sell even more of your nice racks! ;)

Hi Patrick the two weight numbers on my vin are 2360kg and 4460kg so subtracting one from the other will give me 2100kg and multiply 10% to get approx tongue value?

top , se um dia eu puder comprar esses dois modelos de máquinas ao mesmo tempo ...com certeza esse reboque é a melhor opção...mas não sei se meu país aceita essa adaptação....eu acho que no Brasil somente carretinha .

I built my own, since the ones like this I found were just not what I wanted. Most are too "universal" and too heavy. I bought square to=ube steel at a local metal selling company, also some channel aluminum and angle-iron, used carriage bolts and Nylock nuts, even added taillights from an auto parts store. Connected those via the 4-pin flat connector. Hired a welder to assemble the steel for $40, and a little paint, it was down the road. Holds my little 80 or my Yamaha XT225, and I can even stand on it WITH the bike on it, and it is sturdy, doesn't even rock. The bike ties to the hitch loops beside the receiver, and to the 2" sq. tube that extends beyond the U-channel jsut under 2 feet. I strap the tires to the channel so it won't jump out, and used some channel to "house" the lights, as protection from any impacts breaking them. Works great, weighs no more than 20 pounds. Cost me about $120-140 in parts and labor, and I bought enough channel for both a full length track AND a full length ramp. Ramp sits loosely on the end of the ramp, with a simple bolt as a "pin", then stores on the rack, just inside and up against the main channel, with two permanently attached bolts, with wing nuts, flat washers and lock washers. Beyond that, more stuff is just getting fancy. But I'm a cheapskate, and did not count my hours. This rack looks good, too. Most folks wouldn't want t build their own, but "ah's a injunear."

Who wants to die? When the bike falls on you

never compress your forks like that while strapping. It's better to tie down at the bottom of the fork, near the the wheel bolt. Let the suspension of the bike work.

2:27 ;) if you know what I mean

Why cant you weld a Real Front Wheel Stand / clamp in place of that simple bent iron you have...That way the motocycle can stand Upright by itself while you do the TieDown.

Rego says nsw me in vic pigs made me take it off not road worthy withit on even thou i have extra lights

In a truck I just meet the ramp

That looks scarry. Does it affect the steering of your truck ?

It all depends on the Tongue Weight.. if the bike and carrier exceed the limit, it wont work.

using the clutch and the motor may not be the safest way to load ...but to each his own.

Told it cant carry a motor scooter as the rack space is to big for the smaller wheels. That is a shame.

Nice... where can I get one?

Tnx much!!

AH bro that looks scary, what if it breaks , good idea bro, but it scares the shit out of me!

whats the clearance like with a camper shell door?

That is a Super Nice Carrier!!! The best I have seen. I am looking to build one for my KTM690

Why have a pickup if your just going to put it on a receiver hitch?? Makes no sense unless you drive a SUV.

how tall is this guy? if your short how would you get it down by youself?

How can I load a tall and heavy KTM 950 Adventure without being crushed to death?

Nice

That truck is sweet

Cool so where can you get one in the USA?

pretty cool...have you had any "issues" with police like obstruction of tail lights vehicle on back,too wide etc ? is australian standard certified finally how much ?

shouldn't be throwing your equipment down like that

Meus parabéns aqui do Brasil. <--- Portuguese language

Hi Patrick.. thanks alot, this is what i was looking for. ím in UK. where can i find this?

Do you think I would be able to have this same setup on my 2007 Volkswagen MKV GTI?

Can this be used on a sedan or hatch that meets tow capacity?

Can I use this on golf mkv gti, my bike weights abt 180kg.

Fork seals might break if your make the tie downs too tight

What about the tiny duplicate license plate? Do you just go to the title and registration place and order one? (I'm in America)

This is a FZR 600 R :P

excelent!! thanks a lot

Would a kx250f fit on a carrier with a 72in track? And would two bikes weighing 500lbs total be fine on a hitch with a 1000lb tongue weight capacity?

You can buy a 1 1/4 >>> 2'' adaptor. You just need to know the weight capacity will go down slightly. Adaptor is under $40 bucks.