Coyote_Mach 1

Пікірлер

@wg8561 5 күн бұрын

Stock terminator? Those are rare

@Adultmale1000 7 күн бұрын

01 aint a cobra ! lol

@neobirb8597 7 күн бұрын

I wonder how my factory freak 2v would've compared. Bone stock with an Air Raid CAI, that thing kept up with cars it had no business keeping up with. I ran a couple 01 cobras door-to-door from 25-80. By buddy's bolt-on and tuned Focus ST couldn't hold onto it. And the only car amongst my then-friend group that gave it a run for its money was another buddy's FBO 350Z - which was dead even. Even encountered a couple gen 1 coyotes, which I never beat, but stuck with them better than I expected to.

@Boostedangel 9 күн бұрын

Showed me what I needed to now I need that coyote for sure

@g04tn4d0 11 күн бұрын

How times have changed since the SN95.

@cptchalk 14 күн бұрын

When the guy let off he was going 104MPH

@ericconrad2383 16 күн бұрын

Sounds pissed off

@alfonsoguerrero7602 17 күн бұрын

Still have the car what’s the rear wheel size and depth. Is the rear a standard 9” as well.

@Coyote_Mach 16 күн бұрын

Fab 9 rearend and 18x12 wheels/325-30-18 tires

@charliebernal1652 18 күн бұрын

What does a coyote swap Mach 1 run for these days? 🤔 i need this car

@Skill540 18 күн бұрын

💯

@ShaneRobinson1996 20 күн бұрын

2 of my favorite mustangs 💯🔥❤️

@FLAWLSS1 22 күн бұрын

Nice are you in the Bay? We should hit up some meets and cruises

@Coyote_Mach 22 күн бұрын

Not from the bay,we’re in the valley,close to sac

@LodisFinest 23 күн бұрын

Gotta love some snake on snake action 😎

@RAHSVT 23 күн бұрын

Nothing better brother 🐍

@vinylscratch65 29 күн бұрын

The cobra either isnt real or switched his back bumper, because thats a gt rear bumper not a cobra bumper Edit: oh i see, its an 01 not a termi

@Coyote_Mach 29 күн бұрын

😂

@vinylscratch65 29 күн бұрын

@@Coyote_Mach yyeaaahhh prolly should have read the title better lol

@mikelarry82100 29 күн бұрын

Rims & Tires setup please 💪🏾💯

@Vndcatr Ай бұрын

Sounds so crisp 🔥👌🏼

@squidward3418 Ай бұрын

I woulda ran them in my 02 gt

@Coyote_Mach Ай бұрын

😂 you woulda got gapped buddy

@jacknickprobe Ай бұрын

How the hell does that tr3650 shift at that rpm. Mine grinds at 5500😅

@Coyote_Mach Ай бұрын

It’s built

@jacknickprobe Ай бұрын

@@Coyote_Mach what did you change to make it handle those rpms? I have a 4v that I want to build for my bullitt, but this stock tr3650 would hate that.

@anthonytucker7705 Ай бұрын

Did you ever end up with an 11 sec 1/4 with this car? I know you ported the mani and said something about going with 4:56 gears but don’t know if you ever did that. The new Gt350 is awesome btw 👍

@Coyote_Mach Ай бұрын

Thanks 🍻 and nope best I ever ran was 12.5’s @112 with the ported intake and 456s..The car was my daily and I never got to serious about drag racing it,I think if I gutted the interior and had e85 it would have been in the 11s easy..

@silversonic99 Ай бұрын

the honda was going faster....

@codypainter1956 Ай бұрын

That Mach pulled 2 and a half bus lengths on that 2000 got haha my Mach would do that same stock for stock haha that machs running good will Make 330 at the crank with just an intake all day

@Coyote_Mach Ай бұрын

Lol not even close with just an intake..A Mach needs longtubes/no cats and a good intake like a JLT and accufab throttle body and intake spacer to make 330rw on a true dyno..but yes 4v’s easily handle 2v’s

@codypainter1956 Ай бұрын

Shifting at 8k nice 👍

@THINKincessantly Ай бұрын

Soundss Sooo fkk gooo! 🫡

@jdmboostedek Ай бұрын

How did you mount the Mach 1 scoop to the hood just like to know so can do the same

@zstang01 2 ай бұрын

Man that sounds nasty. By far fords best engine shame they don’t use it anymore

@KingCeee Ай бұрын

One of the best

@zstang01 Ай бұрын

@@KingCeee I’m bias cause I have a cobra lol

@Championedd Ай бұрын

@@zstang01 best engine would be the voodoo but those old cobras just hit different

@zstang01 Ай бұрын

@@Championedd I’ll have to check it out I don’t know much about the voodoo engine.

@AWDfreak 2 ай бұрын

Looks like this was recorded in Rancho Cordova, California.

@chriiiiiiiisssssssss6841 2 ай бұрын

Is your Mach CARB and street legal? I have a Mach 1 and I’m trying to figure out how to keep it CA legal

@drufetti510 3 ай бұрын

Baddest coyote swap mach1 in the 209 🔥

@JasonSturdivant 3 ай бұрын

1:23 😬that shift to 3rd gear sounded like it fried some clutches or something. Props on holding that 2nd gear burnout all the way to the limiter lol✊🏼

@Broke32v 3 ай бұрын

Hey thanks bro much appreciated, the 3rd gear shift was a little wierd but only cause I was shifting it manually so it touched the rev limiter before shifting. If I leave it in drive it shifts just fine but just a little early.

@bryanhart2872 3 ай бұрын

Sick ride 👌🏻 sounds nasty 😳

@coryboy345 3 ай бұрын

Thing sounds insane... I'd go down to 4.10s and supercharge it though.

@ralphtrujillo1752 3 ай бұрын

The Ford killed that Pontiac

@SKYLINE500 3 ай бұрын

How does bro have a coyote swap Mach 1 mustang in California 😭🔥

@Coyote_Mach 3 ай бұрын

Lol it’s not that difficult..don’t play by big brothers rules and you can own any car in California 🍻

@drufetti510 3 ай бұрын

@@Coyote_Machhow? 😂 I need the smog plug i see you in Stockton?

@Kadencabs 4 ай бұрын

so cool

@OctaneSlain 4 ай бұрын

I'm looking at a Coyote swapped Mach 1 currently with about the same setup as yours, except it has a HUGE cowl hood that I cannot stand. Looks like the Mach 1 hood clears the Boss 302 intake? What did you do to make it work? Because I was thinking of going with a Gen 3 manifold and finding either another Mach 1 hood or Terminator hood