Hello, you need to use a hand drill with 3mm bit and install female latch to the bracket in alignment to the handle.

@@PatioLinkPetDoors AH ok so really when the video says screw it on, it should say drill holes then screw it on?

Hello, here is a link that will take you straight to the page: patiolink.com.au/product/cat-window-insert/

We deliver Aust wide but if you need international shipping, we can do this but please send us an email for freight cost. Thank you

Hello, yes we can. we have special wheels that go inside bottom of the pet door insert and you can connect pet door to your glass sliding door that slides. Please check how wide is your bottom inside channel of glass sliding door as for wheels to work, it needs to be 26mm or more. You are welcome to email us a photo of your doors and we can check and confirm all is ok and compatible for install and locking. Our email is [email protected] Thank you

Hi Nathan, People with Labradors normally get our XL size pet doors. XL flap width is 31cm wide and Flap height is 65cm including 5cm rise. I will try and post a link below to our XL size pet door. patiolink.com.au/product/pet-door-insert-xl/

They sure are :) Thank you for your comment :)

Thanks for your comment. The reason we used this model pet door is because it is the same one that was used in their main video. Features and quality of 1 piece will be the same. Thank you for your feedback. We are very proud of our Australian Made Pet door, premium quality, 10 year warranty and 24 years of trading and lots of happy customers. We wish you a Happy New year :) and if you need a pet door insert, let us know if we can help :) Thank you!

Thank you Tammy for your support. We look forward to your order!

Hello - yes we do deliver to USA. When you get access to your new home, please measure your sliding door height from top inside channel all the way to the bottom inside Channel as close as possible and also take some photos of your doors (both locks standing inside) and a photo of your bottom track and please send us an email enquiry to [email protected] and we can check everything and provide all the info and a quote. Thank you, Ivana from Patio link pet doors www.patiolink.com.au

@@PatioLinkPetDoors will do. Thank you so much. 😊

Hello, its always very important that you measure your glass sliding door height before purchase. You need to measure your glass sliding door height from top inside channel all the way to the bottom inside channel. If your height is between 2.0-2.1m then you have a standard height. If your height is less than 2m or taller than 2.1m then you will need a custom height pet door insert and we specialise with custom height pet door inserts. You will always have 10cm adjustment on top of the pet door insert (top adjustable panel that goes up and down by 10cm). Thank you and let us know if we can help more! Thank you, Ivana from Patio link pet doors

Thank you for your feedback :) Happy to hear you found this video helpful. Let us know if we can help more, thank you - Ivana from PatioLink Pet doors

Hello - you need to relocate all your female latches to either our adaptor or a locking bracket. And to secure pet door to your sliding door frame, you just need to put 1 screw through the existing screw hole where female latch used to sit to connect pet door insert through the frame. Your welcome to email us some photos of your doors and locks and we can check and confirm if your doors are ok and compatible for install and locking. Our email is [email protected]

Thanks. I am moving to a new state and not near the doors right now. Do you ship to the US?

Yes we do deliver to USA. When you get access to your place, please take some photos of your sliding doors standing inside, pic of handle and female latch and a pic of bottom track too and email us [email protected] Also please measure your sliding door height as close as possible from top inside channel all the way to the bottom inside channel and let us know your height. We look forward to your email :) Thank you, Ivana from PatioLink Pet doors @@4LifeChanges310

@@PatioLinkPetDoors Oh ok 👍🏼 Approx how much is shipping to Florida?

Depending on size of the pet door insert, it can cost up to $400 AUD. But email us when you get access and we will see if our production can make a pet door that will be foldable in half and delivery should be cheaper. @@4LifeChanges310

I tend to agree but some dogs actually get cold and do need some clothing to protect them but generally animals wearing clothes just pisses me off. This dog doesn't seem uncomfortable

@JimmyDire In Melbourne winter time, when weather is freezing, these kind of doggies love to be nice and warm.

Hello :) You can try and install a pet door insert in a corner where fixed glass panel is. You will need to look for screws that are holding your fixed glass panel in place, unscrew them - and slide the fixed glass panel & fit a pet door insert in a corner, then secure the fixed glass panel in a new position with a few new screws at the top where fixed panel is.

Hi Jeremy - yes you do. You need to relocate your female latch to our Locking bracket or Adaptor panel so you can lock your glass sliding door into the pet door insert. You will also need to connect pet door insert to your sliding door frame, and this is by connect pet door to frame with 1 screw where female latch used to sit, to catch pet door insert. Have a look at this page online, Check My Locks patiolink.com.au/check-my-locks/ or feel free to email us some pics of your sliding doors to [email protected] and we can check and let you know if your doors are ok and compatible for installation and locking without any damage to your sliding doors. Thank you

Hi Chris, thank you for your message. We specialise with huge range of sizes for small and big doggies. this one in video is our XL size pet door (flap height 65cm including 5cm rise and this one has soft flap installed without any magnets on the flap because these particular greyhounds are very shy. We also have Greyhound pet door inserts that have flap height 75cm including 5cm rise at the bottom. ) Please click on this link and it will take you to all our sizes and prices. Our factory is located in Gold Coast, and we deliver Australia wide. Feel free to email us and include few photos of your doors and we can check if your doors are all ok and compatible for installation and locking without any damage to your doors. patiolink.com.au/products/ Thank you, Ivana from Patiolink pet doors

Hi Erin, this is our Medium Black pet door insert, its ideal for small doggies and bigger cats - up to 10kgs. It will suit doggies such as French Bulldogs, Cavoodles, Maltese shitzu size. We also carry huge range of sizes from small up to Mastiff Size. Visit our website www.patiolink.com.au for more info and please contact us and we can help more - Thank you!

Hi Peter, here is some info on this product dimensions and features: store.intl.petsafe.net/en-au/electronic-smart-door-large Just check how tall is your golden retriever from paws to top of back. If he/she is up to 55cm, then we will do a 10cm rise at the bottom. If you like to make flap height 60cm, we will need to make 15cm rise at the bottom. You need to check flap height will be ok when your doggie goes through that he/she doesnt bend down. Your welcome to email [email protected] for more information. Thank you - Ivana

Hi Patricia, here is a link to the online store: www.patiolink.com.au/online-shop If the link doesnt work, just go to www.patiolink.com.au These window extensions are for Patio link pet door inserts. Contact them for more info :)