I have smaller hands, have no issues at all with trigger space, pinching, or recoil on the Max. Different strokes for different folks.

As a "future viewer," this was extremely helpful. Thank you.

Great, clear and to the point video. Thank you.

The manufacture should of done what Brass Goat did on their design which is allowing the main body of the catcher to remain on the gun while the user can detach the bottom half of the catcher. That lets the user have a simpler process of dumping the casings and it lets the user have 2 options whereby the other option is to shoot the gun with the lower half of the catcher being detached and therefore the upper part that is still covering the ejection port is acting like a funnel to divert the spent casings straight down to the ground since there are MANY AR-22 users who obviously dont want to save the .22LR casings and also dont want them being flung out all over the place

Nope not saying that's a really pink rifle. Can only see a really deranged-looking gun with a pink and orange/brown color scheme as if someone was seriously drunk when they picked out their colors for it ;o)

Cool vid. I chose a P22 over a Mark IV. Kinda regretting it. But I'll get the Ruger yet...

Where can I get copies of those opinion letters? That would have been awesome if you had provided links to those opinion letters.

Good~😉👍 IMI SP-21 Barak PistolIs it possible to review it?

To each his own, but for me the more safeties the better. I’ll stick with Glock.

Looks and sounds like a lot of money

I have the 380 Plus version. It has a double stack magazine. I like mine a lot.

By the way you are also honest and I will subscribe right now

I've had one for probably 17 years very reliable gun and the safest gun to carry would be double action single action to be carried with the hammer decock and One in the Chamber with no safety on by the way you are a unbelievable shot with a pistol

Cool space gun 🤠

good explanation of the operating system. thank you.

Looks like a Taurus spectrum.

Please support my sponsor for this video - Browne Works Inc. - They are a manufacturer of customized exotic wood grips for all your firearms. Each grip set is made to order and can be customized based on material, color, finish and even custom engraving. If there is something you want and do not see on the website, contact Mark, the owner, personally and he will do his best to make anything for your needs! browneworks.com?aff=11 Or use the discount code TGV10 to save 10% on your order. instagram.com/browne.works.inc/

I just bought a Sig P320 in .357 Sig and that’s one bad ass caliber!

Hmm - this may be the solution especially if you may be going to the restroom etc

My owl does have shake awake... great feature

Never mind the clone clowns dude, happens in every hobby, there’s always someone just green with envy because they can’t have what you built or their build is inferior to yours. Great build, great video and what better way to honor and remember these men who did and still do what most couldn’t even fathom. I’m subscribed too!

I own this firearm. It's in my rotation with my Ruger EC9S for my edc. The Bersa Thunder 380 is accurate, reliable and I have had zero issues. Highly recommended. Just a note Bersa makes a Thunder Plus that has a double stacked 15 round mag and the mag release button is lower on the frame otherwise same build with a slightly wider grip to accommodate the double stack.

love it but long grip is better for my extra large hands

Why in the world didn't you show off its biggest claim to fame? The ability to rapid fire like a pistol???? Missed the mark completely there buddy.

I don't like the paper clip either but the bull barrel adds weight. That helps.

That is the old style slide and extractor gen2 I believe

I have a Colt’s MK IV / series’ 70 government model .45 ACP original in mint conditions and I’m in love with the gun. Some gunsmith’s told me the gun could be worth a lot, they gave me a reason but I’m gonna be realistic I didn’t understand him. My grandfather that he passed in 2023 gifted me this 1911 and now I understand why the 1911 it’s the world champ. I have a strong sentimental value for this 1911, that’s the reason why I didn’t contact Colt so they could tell how much it’s worth. I’m not gonna sell it in my lifetime. The 1911 it’s the real definition of “where I put the eye I put the bullet” Also I want to thanks this content creator for always upload very informative videos.

I’ve got a 66-2, 2.75 inch barrel. Great shooting gun that’s been by side since 1985. On your remark about R butt vs S butt, these are carry pistols and a R butt is what you want. Obviously this is just a preference on your end when you said you’d like it in a S butt. But I carry mine a lot so R butt is the way to go. Great video and beautiful looking 66-2 you showed us.

I THINK THE SMITH AND WESTON MODEL 929 IS THE MOST BETTER THAN THIS IT'S HAS 8 SHOTS ALSO CAN CONFIGURE IT INTO 9MM

Nice video, but one thing I haven't seen mentioned is that once you pull the bolt/carrier mechanism out, the hammer can, or will lurch forward (sorry if I missed here). Then when you reassemble, the hammer will not be positioned to fire. When I went to the range yesterday for my first test - I couldn't fire the FPC. VERY bummed. So to save others from being very bummed, here's a tip: When replacing the carrier, make sure the hammer is fully cocked, either manually or by virtue of dissembling when it's cocked. I hope this saves someone a trip to the range and not having the FPC function as planned. The FPC is actually very easy to disassemble and reassemble if you follow the process defined here and make sure the hammer is set properly upon reassembly. The first time is maybe unusual if you're used to AR15's or shotguns, but the 2nd time is just a few steps and handle the slider spring so it doesn't launch, then it's 1-2-3 and done. Very well designed. The other thing I'll mention is complaints on how the mags are released from the stock. I really like how that was designed. Again - a few practice sessions and you'll feel very confident of dropping and replacing a mag. An improvement would be if S&W would orient the mags 180 degrees in the stock so when they pop out, you shove them into the mag frame without rotating. One step removed in a time sensitive situation could be the difference between your life or the goons. On a good note - I put a couple hundred rounds through my M&P Shield Plus yesterday and a couple mags through my friend's tricked-out 9mm Staccato 2011 - sweetest handgun I've ever fired, but I don't want to spend $4K for my own. I'd rather put that into another 1/2 acre of TX land.

What plate did you use?

The SS model is Gorgeous been off the market for about 5 yrs......

I really hope in the future a 8 shot version of this revolver comes out .

So you have been holding on to " Blades " revolver.

Robo Cops Moma Revolvers .😂😂😂😂😂😂

Judge Dreads retirement pistol 😂😂😂😂😂😂😂

Wish it was a 7,8 shot revolver

oh the other thing was that it worked perfectly,,,British engineering at its finest,,

the frame slid back just the same and the cylinder looked like a Stanley pump screwdriver

The first I used was the Webley Fosbury,,,they made the first auto revolver,,

Really glad you revisited this gun again, great review!

The most accurate pistol I've ever shot in my life with a Beretta. Just went to shoot with a friend of mine that had one, the design is remarkable and clearly made for accuracy. The clone is the same as well. 25 yards off a rest of course, I managed five groups of five shots at 25 yards all measuring 1 inch. That's almost unheard of in a pistol. I do a lot of pistol feuding and hand loadIng, but with factory loads right out of the box, I was purely amazed the pistol fits extremely well in the hand so natural to hold and yes I'll be saving up for one, most possibly the one made in Turkey.

Turkey makes beautiful Guns.

Turkey makes absolutely beautiful firearms 100% dependable. I own a big variety from different manufacturers and have never had a problem with any of them and some of them are so beautiful I don't even want to take them to the range.

The world will be a better place when the ATF and NFA is canned. Unelected “ officials “ governing what we can and can not do is not good for the American people.

I've got a 11.5 Spear LT in 5.56. So far, So good.

Just installed two of them on my guns today

Yeah its "snappy" but not a huge issue. It feeds reliably and thats really all you need. That malfunction seemed to be user induced with the lady with pink fingernails

I appreciate you so much It’s Very Cool your Video you are good man Jason ❤ Continue Red Dot on Rifts AR15 I’m from Iraq 🇺🇸🤝🇮🇶I followng on instagram I Subscribe to your channel

Hi there im from south africa. I own a vektor sp1 and the vektor z88 (beretta clone) i was issued the SP1 when i joined the military police in the south african defence force back in 1993. It was taken away from us a few months later and we got issued the z88. When i left the army and joined the south african police service i was issued a z88 again while friends of mine were issued the sp1 while in the metro police. I always wanted to get a sp1 but never got one at a good price or if you did see them they where used AF....a friend of mine left south africa emigrated to the USA and in his safe was a brand new sp1 that he bought over 20 years ago when he left the south african police.....he gifted me the new sp1 and it is 100% my safe queen ....i have the z88 and the sp1 in my safe because they are true south african iconic firearms.......i will never let them go.....so much history in both of the guns lives.....than you for your channel keep up the awesome reviews