Yeah I strongly recommend getting the extended warranty! I love them…

Thanks glad you enjoyed…

a.co/d/3r5Uixm

I only use it for light stuff not recommend for heavy stuff…

Looks light and compact. I keep the aluminum lightweight 6ft ladder but takes alot of space in my van

Yeah that's what I would do. Kinda looks more like a household ladder. But I like the compact and lightweight aspect and I can keep it in the van pretty much anywhere

It’s not heavy I use it because it’s easy to store and carry. Trouble shooting ect.. if you don’t have good balance I don’t recommend it 😂

It’s really disgusting..Folks work their asses off for stuff like this.I mean yes it’s self inflicted but they get taken advantage of a lot…

I see it a lot...

I did not show that part due to the fact I do not want to be liable if some messes up. You need a 24v relay wired into the control board fan circuit. Where do you live sir?

Meta rayban glasses

They give you whatever money can buy 😂

Thanks

Yeah it’s more for recreational than fishing just my opinion…but fish the hell outta mine 😀

@@Matts_Crafty Yea Matt being older now I'm not looking to fly across the water to get somewhere, just ride , and do alittle fishing and enjoy the day. But I do understand how folks love jet skiing.

I’m with yeah Bud!👍🏽

Thanks John

Depends on what unit you’re installing correct? And is that for all four sides or just one? Is that the same as well with an inverted side discharge? What if you don’t have 18” what do you do then?

😂

This was exactly what I was thinking... And I have never seen someone use MAP gas and solder. I have only brazed refrigeration lines in my 25 years in the trade. I had to rewind the video and make sure I was seeing correctly.

@@Fadda-Pyou need stay clean flux and stay brite #8 solder. Clean tight joints it’s not forgiving like solder you only need half the width of the pipe in relation to the amount applied. If you feel uneasy next to a metering device then disconnect it. I used to much heat in this video because he was learning. You should use some type of heat barrier. But im good enough now to install equipment without using it.still good practice to always use heat barrier. Practice with it. You can buy it at supply house.com need more info LMK

Stay brite #8

Is Stay Brite 8 stronger than brazing? Joints soldered with Stay Brite 8 solders exhibit considerably higher than necessary elongation for sound, dissimilar metal joints and vibration applications. Stay Brite produces an overall component with greater strength than a brazed component whose base metals are weakened by annealment from high brazing heat.

​@@Matts_Craftyic. I have never heard of this product. You may have taught me something new today. I will check it out.

@@Fadda-PDo your research this isn’t teaching how to just it only entertainment and practice, There are cautions and certain procedures you must take heed to! It’s not a short cut! But once mastered it will save time nitrogen and lugging torches . You use to much it will pull inside of the pipe and can get into the system and metering devices. Watch some other KZfaq videos on it any questions let me know 👍🏽

Thanks brother!

Thank you!

Here is the link I believe they are dicontinued but have other versions... www.amazon.com/gp/product/B006VE3WI6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

It's just a car...

you are correct it is where its supposed to be now...

Why thank you for the kind words 😂👍🏽💪🏽🤜🏽…

Very true 😂

You need to install a low voltage relay between the furnace control board and the diffuser.

Link is in the description. Verify your motor mount fits! If it does not fit the mount you can just drill the holes you need. I had extra bolts lying around in my shop. Worse case scenario you take a trip to Home Depot or Lowe’s and grab the bolts you need. Any issues feel free to reach out!

Thanks nephew!

Absolutely strong enough!👍🏽

@@Matts_Crafty So these Switches are becoming very popular and I know everyone want to use it for fishing...I don't have a channel but you would get some views if you did a series on installing your batteries, why you selected the trolling motor you did and is it enough thrust, etc.... Greatly appreciate your videos and responses. Thanks Last question....(I hope) How long of a shaft is on your trolling motor and what thrust...

54” is the length. I’m heading out of town but I will try to remember to do a walk through on my battery. I only use my trolling motor in lakes but I fish mostly in open bay and ocean so I drift mostly.