SolidWorks MEE Tutorial

Пікірлер

@mouradamr2307 11 күн бұрын

is there any way to remove the middle line where was the Mirror ?

@rsdineshkumar2978 Ай бұрын

Thank youuu..

@Grahamalon8001 2 ай бұрын

Really excellent showing of how to create an "impression" for the label. My only feedback: how are you selecting the interior surface for the trim (minute 18:15 and on)? I cannot see any selection manager in your video, and without hiding the "top level" surface it is difficult to follow. Got this one bookmarked, though, as I am using it for some unique impression on a product enclosure plastic housing.

@Grahamalon8001 2 ай бұрын

Nevermind, I figured it out: it was just extremely difficult to see the top surface was removed as there was no distinguishment between the sub-offset surface. This is truly amazing that a sketch itself can be used to trim a surface like this and create impressions. I have not seen it done until now and am puzzled how! Thank you so much for this great tutorial! The bottom right showing the goal feature / setup is a step way above other content creators.

@mrlitespeed 5 ай бұрын

So the deaf and dumb guys now make tutorials - that's useful :-)

@rananagy6754 6 ай бұрын

Can l design each panel alone and then make assembly?

@eliovalladares2185 7 ай бұрын

Very good explanation!

@prabinjachak1733 7 ай бұрын

What a tutorial it is! Modelling, explaining, presentation - top notch.

@antara-h4876 9 ай бұрын

I have this message unable to divide the surface the adjustment tool and the target do not intersect

@antara-h4876 9 ай бұрын

16:46

@josefernandocgmed 11 ай бұрын

Thank, for the video, was usefull Im begining in surface modeling. Thanks from Colombia!

@jddesigncadcam3747 Жыл бұрын

Hello I am from India and I like your video , alredy I work in Tool Design department so please upload your video

@jddesigncadcam3747 Жыл бұрын

Every day upload video, I promise every day watch your video first

@jddesigncadcam3747 Жыл бұрын

Your video very knowledgeable , please keep it up 👍❤

@charlestoneoyoo Жыл бұрын

Thank you for your videos

@charlestoneoyoo Жыл бұрын

thank you so much for this video

@user-ik5zw1tn7t Жыл бұрын

kzfaq.info/get/bejne/oMqnaMyjq8jad4U.html

@rhemaislife Жыл бұрын

Thank you so much 😊

@mohammadtayarani Жыл бұрын

Thank u I watched ur video from australia. iranian bro

@Akash-gq6ru Жыл бұрын

in this video 4:40 error spotted how to resolve this please explain

@charlestoneoyoo4087 Жыл бұрын

Thank you very much for this. Very helpful

@Kshayari19 Жыл бұрын

nice

@notfake1381 Жыл бұрын

Bro software name?

@rhemaislife Жыл бұрын

Solidworks

@SolidWorksMEE 11 ай бұрын

Solidworks

@SolidWorksMEE 8 ай бұрын

SolidWorks

@huzaifakhan4015 Жыл бұрын

Very informative video. ❤️

@mpam002 Жыл бұрын

keep up the good work!

@SolidWorksMEE Жыл бұрын

Thanks, will do!

@ms.tazulengineeringworks7273 11 ай бұрын

BEST OF LUCK@@SolidWorksMEE

@GEMini_gurll Жыл бұрын

thank you so so much!!

@SolidWorksMEE Жыл бұрын

You're welcome!

@klingeand Жыл бұрын

Thanks, very fine tutorial! Very clear about what to do, not too fast either, just fine :)

@duca74 Жыл бұрын

ctrl+sx mouse rotate ctrl+center mouse pan ctrl+dx mouse zoom?

@mateussilva-yt7jf 2 жыл бұрын

muito bom !! e vai ter continuação?

@arielmmos 2 жыл бұрын

Este video es increible, como usa las herramientas haaaa asi se usaba, para eso era...🤗

@SolidWorksMEE 2 жыл бұрын

Thanks Ariel

@williamhoward7121 2 жыл бұрын

Amazing attention to detail. Excellent Video!

@SolidWorksMEE 2 жыл бұрын

Thanks William

@bugiijorri7125 2 жыл бұрын

Thanks for you tutorials, keep it up and good luck! Also, kzfaq.info/get/bejne/rN2GYKyexN7QmZc.html may be useful to you if you are looking for a free cloud solution for storing and sharing drawings, 3d models :)

@bibekkafle3348 2 жыл бұрын

can i access those parts for practicing assembly

@qatqrgarage 3 жыл бұрын

Junk. Can't keep up.

@YelTrik Жыл бұрын

KZfaq has a "Playback Speed" control. You play it back at 1/4 speed if needed. Try it.

@swamys745 3 жыл бұрын

Awesome

@pardhukasam5752 3 жыл бұрын

Can anyone say which company's car Bonnet is this?

@ichayanti5991 3 жыл бұрын

good job....

@maherbenamor3254 4 жыл бұрын

did you have drawings please [email protected]

@Fusion360School 4 жыл бұрын

Great tutorial.

@aiminatasha4753 4 жыл бұрын

Sorry, may i know how did you made surface-fill4 at the minute 8:59 ?

@kevinland534 7 ай бұрын

He basically did another sketch and drew a straight line on connecting the two bottom points. Then he used Fill Surface tool like he did the top curve.

@dwwwwwwwwwwwwwwwwwwwwwww 4 жыл бұрын

If this is being shared on youtube for teaching purposes, why are you going so fast? No need for showboating in an educational video.

@dwwwwwwwwwwwwwwwwwwwwwww 4 жыл бұрын

Despite the first 3 minutes being very fast, still a cool video. Thanks.

@robbiecotner3666 3 жыл бұрын

I appreciated the speed if you just want a quick rundown. The video was probably sped up.

@samhklee 2 жыл бұрын

Donald, you are correct. This guy is not a trained instructor. It seems that he is trying to catch a train or plane.

@YelTrik Жыл бұрын

KZfaq has a "Playback Speed" control. You play it back at 1/4 speed if needed. Try it.

@dwwwwwwwwwwwwwwwwwwwwwww Жыл бұрын

@@YelTrik Boomer learns how to use KZfaq. Congratulations sir. Now study how to make a good video. Hint: It involves making videos that don't require quarter playback speed.

@Saravanan.28 5 жыл бұрын

Hi bro, i have a doubt. How to show the orgin point in blue colour? Like in your video.

@izdiharamrisaari9216 5 жыл бұрын

Sorry but at the minute 7:11 what are the transitions that you made?

@SolidWorksMEE 5 жыл бұрын

Hi dear I didn't realize that you said! Could you explain more?

@dmoney_thegreat 4 жыл бұрын

How did you turn the sketches into 3D Curves??

@izdiharamrisaari9216 4 жыл бұрын

@@dmoney_thegreat Using project curve

@muzirahmurad1131 2 жыл бұрын

How to make the project curve ?

@kevinland534 7 ай бұрын

@@muzirahmurad1131 I know this was 2 years ago but what he did to create that projected curve was to create an offset plane at the inner loop height of 11mm and then projected that inner curve into a sketch on that new projected plane. Then he created another offset plane at the height of the outer distance curve of 10.2mm and then projected that outer curve into a sketch. This is why he has 4 sketches now.

@mahdiehhojabri5193 6 жыл бұрын

This video is wonderfull to me. thank you

Ең жақсы KZfaq

Пікірлер