Bonjour cette débroussailleuse pèse combien car j'ai trouvé d'occasion cette même machine mais dans le temps on doit bien ressentir le poids que ça pèse pendant l'utilisation...

Droning, barely audible narration.

all weibangs are pros. they don't do a red domestic range of mowers anymore

I agree that your video was a help so thank you. However, I do feel that you should have an assistant holding the camera and proper lighting as it would have made it so much easier to see what you wanted us to see. Also, you omitted to show how to adjust the headband by pulling it down and twisting the knurled knob. Seems obvious, but one of your commentators asked the question. Maybe worth redoing? Thanks again.

Yeah lets see a load put on it. Stall that weed wacker motor right out.

It is 2 stroke, so much higher RPMs than a 4 stroke. Great setup.

Thank you for this video. It's hugeky useful.

Worst video I've ever seen. If I wanted this info I can look myself on the website. Pointless. Waste of time.

Bonjour l'avez vous encore cette machine ? Je recherche le même modèle. Très bonne machine pour le milieu professionnel

If you haven't actually used it what is the point off this review?

Hi how do you get a mountfield 1530h disengage the hydrostatic

Thanks for taking us through the webpage...do you know where I can see the shredder being used?

Stihl recommends HP Ultra for 4Mix engines. But there are better oils available like Amsoil Saber. Or even Echo Red Armor.

Thanks for the advice

Disconnect the spark plug lead before you turn the blade (basics)!

Best ride on mower i ever owned even though mine is a very used one (Bahia 2003) with a kawa engine. Strong and reliable. Love it.

You forgot your ear protection, and your belly button protection too.

Very disappointing to find that this “product review” didn’t actually involve showing the product, at all.

There is a company that still makes replacement parts for a lot of the Howard gems. Those were by far the best walk behind rototiller ever made in the world! I was fortunate enough to get an old one and got it working and used it in a business for several years. By the way, the man in that video doesn't know how to run that thing properly! And dowdeswell bought out the rototiller division and made them for a while. Mine was an old one that had a dry-sump 9 horsepower J.A. Prestwich engine on it. Those walk-behind tillers will do evey bit just as beautiful of a job as a tractor mounted rototiller if they are used to properly. They can leave a beautifully smooth surface with no tire marks and no footprints!

Se ve excelente 👍

It's rubbish ,buy something else

7:03 was that a fart?😂

Hi I have one of these and they are really good. However, I find it hard to remove the spark plug cap can you advise. It appears to be located at the front of the machine but instead of a rubber cap it appears to be metal. Any help would be appreciated. Thanks

Wanted a review. Not watching 5 mins of stump grinding lol

You stated nothing more than what was on the screen already, which looks like it came off an internet sellers site. Your explanation of the machine was poor. 3:54 minutes of my time wasted.

I run a 6 tooth multi tip mt2 type wheel and have never had a problem with bolts breaking . Maybe that was the reason for the mt2 design wheel. Ps I run a greenmech (Laski) 22hp diesel belt driven machine

Good information thank you I purchased one

Thank you for this - my fiancée has just been issued with one as a Ranger and we were puzzled by the lack of instructions. We *thought* we were on the right track but it was great to confirm, so many thanks :)

try finding one for sale, would love to own one

It was kind of you to think to take the time to record and upload this; thank you. If you hadn't, I'd have a higher chance of needing to extract a chainsaw from my forehead! The producer should really thank you with some free gear.

Thanks ! Greetings from Germany

faut prendre un café mon amis, c'est trops mou tout ça! c'est comme rouler à 50 kmh sur l'autoroute avec une gt40!

Roy, just wanted to say thank you very much for taking the time and effort to put this video together. Very helpful and made the assembly much easier. Hope you are doing well.

Hello Stefan, My apologies for the late reply, I have just seen your comment! I think I have found the issue now; although I was tightening the bolts up to the correct tension, it didn't appear to be enough. I now tighten the bolts and then, with a flat centre punch, hammer the keeper block a few times, which enables me to tighten the bolts a bit more. I have been doing this for the past 18 months, it has solved the issue. Roy

Thank you really helpfull

Love you, gorgeous girl....

The included instructions are useless, I would have faffed about for ages without your video. Thanks very much for doing it

Electromagnetic micro generator is possible to implement???

😋😋😋😋😍😍😍😉💋

sexi lady de megdugnálak

enything about 6.5hp is under powerd so i went for the 15hp megga power

Great channel, very imformative!

Hi. Which collector do you recommend for this model? Many thanks

How about showing fitting it and using it? Anyone can read the article

Why does the Feider FRT-7550M keep mangling the steering rack plate. My machine is less than 2 years old and had needed 2 new steering racks.

The wheel is worn. Happens when bolts been little loose and wearing on the wheel. Knocks on the wheel if loose. Weld the back of the wheel. Or send to me and I fix the wheel. Same happened to me. Both on the mt1 and mt2. Not anymore since I figured why. Tighten them all the time now.

Basically just reading info from a website, not a review with any info gained from experience.

Hello Gordon, Thank you for your question, I can't answer it directly. However, I would drop Mountfield an email with the serial number of your machine and they should be able to find you the correct manual. In the meantime I have found a few manuals online which may be worth looking at. You can see the links below. www.mountfieldlawnmowers.co.uk/support manualsfile.com/product/k2g21bxxk10.html manualzz.com/doc/51842376/mountfield-827h-operating-instructions

How do I clean the air filter and change the spark plug? The manual on the mountfiled website is for a different engine or seems to be.

Excellent. I found the written directions that came with the helmet unclear. I did it in a few minutes with your video.