Fantastic video--this solution is perfect for the single-handed hard-top removal/reinstall.
@BirdDogOffRoadAdventures7 сағат бұрын
Great Video Bill
@MrDoom696911 сағат бұрын
Looking Great.Wow love that bronco..
@bthorn3200115 сағат бұрын
Hey Bill. What’s your oil temp usually run at?
@EvilleTruck5 сағат бұрын
@@bthorn32001 around 180-190 normally unless on trails or being mean to it they get up over 200
@EvilleTruck16 сағат бұрын
Wow this is an older video that I thought I posted , but just saw it was never published, so here we go bonus video this week 😆
@MrDoom696921 сағат бұрын
When did you get that swing gate subwoofer box? I don't remember if i saw that video?
@EvilleTruck16 сағат бұрын
Well first of all thanks for asking , I just went to look for the video and found a different one that was never published 😬 . I've had the stinger box for over a year now, pretty sure I recorded a video but not sure what happened with it, I have a memory card somewhere with 2-3 videos I know I recorded but can not find any where , that or I accidentally deleted them without saving first. But looks like this may be one of those because I do not see the footage for it anywhere.
@MrDoom696912 сағат бұрын
@@EvilleTruck Is it better than the kicker subs? Do you still have the install paper template?
@askren764 күн бұрын
Props to M2M for thinking of the aftermarket rear speaker pods. I have several things from them and everything has been well thought out and quality!
@EvilleTruck3 күн бұрын
Agreed, Was first thing I thought when I first saw it, that its cool too bad it wont work for me since I put in larger pods.. and they said , oh we already have a different version for that.
@bthorn320014 күн бұрын
Hey Bill. Great content. Have you noticed an oil temp increase with any of the bumper replacements you’ve done? I did a capable to modular swap and my oil/trans temps are about 5-10 degrees higher now. Any thoughts?
@EvilleTruck3 күн бұрын
Thanks, I have not noticed any changes like that no, but to be honest I'm not sure I have paid super close attention to notice it, I would most likely just have noticed if it was a significant increase or started getting to scary temps.
@MrDoom69694 күн бұрын
That Looks nice...That is a great idea for storage.I have a hard top on my bronco,wondering if I could do something like that?
@EvilleTruck4 күн бұрын
@@MrDoom6969 Yes it works with the hardtop, or soft top just not with the bestop unfortunately
@Biglucs_Bronco_Life4 күн бұрын
I love my attic rack! I had it installed at Super Cel Tennessee perfect place for the recovery gear.
@EvilleTruck4 күн бұрын
Its a great rack, out of site and mind until you need it. Glad I finally got it installed.
@AlaminhossianAli5 күн бұрын
Hello, Dear I visited your channel, really nice video, and I like this video. But your SEO score, Tags, descriptions, and title are not perfect, If you want to grow your channel and increase your video views, then video SEO is very important. If you want I can help you. The problem that the channel has is mentioned 1. SEO Score is very low 2. No Title - Description - Tag SEO friendly 3. No Share Social Media Platform and many problems on your KZfaq Channel Immediately need SEO for your KZfaq channel I am waiting for your response. Good video but your channel not growing because your all videos are not SEO Optimized. thanks
@AslamSikder-to9xs10 күн бұрын
Hello sir I am Aslam Sikder Sopno. I am SEO Expert . I can grow your channel very fast.
@technicaldisasters10 күн бұрын
The drawbacks you mentioned are just too much. I hate my OEM soft top, so I’m going to save up for a Turn Off-road hard top.
@EvilleTruck10 күн бұрын
I am really liking what I have seen of the turn offroad hardtop, Even if I didn't like the top ( which I do ) I would still be impressed with how they handled the development and roll out of it.
@justinzimmerman285211 күн бұрын
I love mine, wouldn’t have any other top
@MrDoom696911 күн бұрын
In my opinion...I don't like soft tops at all..I have a hard top on my 2 door bronco.Great video.!
@EvilleTruck11 күн бұрын
Fair enough! I do regret selling my old hardtop but thought there would be be a lot more options available by now at the time
@EvilleTruck11 күн бұрын
Its been two years since the installation for the Bestop Trektop, and just wanted to check in to show hows its held up since then. Checkout the original installation video at kzfaq.info/get/bejne/n8BkaLugtZnPmX0.htmlsi=9-k5GMhXtdt85M0Q
@Travisj993514 күн бұрын
It's because of the 1.5 inch spacers. Take them off and it'll be good 😅
@EvilleTruck14 күн бұрын
The spacers were needed to keep the tires from rubbing the frame and upper control arm, the OEM wheels do not have enough offset to run a much bigger tire without them.
@MrDoom696918 күн бұрын
Thanks Bill...Keep making GREAT videos..😀
@justinzimmerman285218 күн бұрын
I’ve actually got one en route as we speak. Will we see u guys at Stampede?
@EvilleTruck18 күн бұрын
How many miles you have? you are on 37's ?
@justinzimmerman285217 күн бұрын
@@EvilleTruck 25k miles, but I’ll show u the video that screwed it up. I had to wench, and forgot to turn my front locker off. It was not pretty
Special thanks to JFEGWO for sending out there 6250A Batter Jump Pack for review. be sure to stop by and check out the products they offer at www.evilletruck.com/jfegwo
@scleco9318 күн бұрын
Body lift. Ghetto fab. Gross
@Searching-4-Paradise21 күн бұрын
How does that sound bar sound?
@EvilleTruck21 күн бұрын
It sounds good, but only after also adding a subwoofer too it by itself is not a huge improvement.
@Searching-4-Paradise21 күн бұрын
You guys are great, nice detailed video!
@EvilleTruck21 күн бұрын
Thank you
@jdegid24 күн бұрын
great video kinda crazy to not do a brake pad replacement when this was all apart.
@EvilleTruck24 күн бұрын
Thanks, if we had all the things it would have been great to get it all done at once but schedules and parts arrival worked against that plan 😢
@MrDoom696924 күн бұрын
Really Nice video....!
@EvilleTruck24 күн бұрын
Thanks, appreciate you watching and commenting.
@PontoonGrandpa25 күн бұрын
Pretty standard hub/bearing.... happy to see that. For all of us in the north/rust belt.... don't forget to clean that knuckle real good before re-assembly. And a good dousch of fluid film (baaahhhhh).
@EvilleTruck24 күн бұрын
Yes pretty standard, luckily no big surprises or some weird one off design choice for theses.
@BirdDogOffRoadAdventures25 күн бұрын
Thanks for doing this. I have a feeling we are all going o be doing this at some point 😂
@EvilleTruck25 күн бұрын
@@BirdDogOffRoadAdventures haha yeah , I have a feeling this is just the first of many I do.
@nick742527 күн бұрын
BS kamalah Harras ad before this video FKH trump 2024
@EvilleTruck11 күн бұрын
We have no control over what ads get placed on our videos, I imagine there will be a ton of political ads all over youtube and other sites as the election gets closer. Fun times
@MrDoom6969Ай бұрын
Thank You for this video...!
@EvilleTruckАй бұрын
@@MrDoom6969 Thanks for watching
@douss11Ай бұрын
this is great! but for the price all function should be working fine without doing other changes. thank you so much to get this video done.. great info to know before buying this
@EvilleTruck11 күн бұрын
It seems they have worked out most if not all the kinks now, so it should be plug and play for new customers, but yeah pretty expensive to pay for being a beta tester. Every time I get into Matts Branco I am tempted to order another for myself, but have a couple of other things to get on my list first.
@timjackson4927Ай бұрын
Thanks Bill, very helpful !!
@EvilleTruckАй бұрын
@@timjackson4927 happy to hear it’s helpful
@breaddrinkerАй бұрын
Another genuinely useful video. Many thanks.
@EvilleTruckАй бұрын
@@breaddrinker thanks glad to hear you find it useful
@MrDoom6969Ай бұрын
LOOKS GREAT...Nice Video....
@EvilleTruckАй бұрын
Checkout all the different offering from Tackform at www.evilletruck.com/tackform
@sheikhitinstituteАй бұрын
I recently viewed your KZfaq videos and was impressed by the high quality of your content. However, I noticed that they are not optimized for SEO, which may be affecting your views and subscribers. I can help you identify and fix these issues to reach your audience more effectively. Let's work together to take your channel to the next level!
@gerardosoto3888Ай бұрын
I did the same in my 99 Chevy tracker but since the front suspension has 2 inch spacer , the spring ended compressed and now the suspension y very hard , and has a rough driving I feel even the litthe bumps on the road. I would like to find a lower control arm relocation kit (move the lower arm down) to release some pressure to the springs.
@robertkraft5631Ай бұрын
Thanks great video
@EvilleTruckАй бұрын
Glad you enjoyed it
@Camaro1019Ай бұрын
Arb is cheap as hell for not including new studs.
@EvilleTruckАй бұрын
I don't think they even know that they are missing for the Bronco , they just see it uses same axle housing they built a cover for and say yup that will fit.
@crisiffland4259Ай бұрын
Nice video. Are these old videos or do you still own the Bronco?
@EvilleTruckАй бұрын
I still own the Bronco, I traded it for a little bit but then got it back.
@coltonwhite9760Ай бұрын
Just installed this lift on my 4dr and was wondering if you’ve had any problems with it squeaking?
@EvilleTruck11 күн бұрын
Sorry I missed your comment earlier, I did not have any issues with anything squeaking with this set up.
@texasgrillchef8581Ай бұрын
What lift kit did he use. How much lift?
@EvilleTruckАй бұрын
He has Zone 3 inch lift www.pandamotorworks.com/collections/2021-ford-bronco/products/zone-offroad-2021-ford-bronco-4-door-3in-adventure-series-lift-kit-sasquatch-only?sca_ref=2466226.NkDHNXwTBk
@kakaxtАй бұрын
Does this mean that you have to use 93 octane from now? Hows the mpg 🎉
@EvilleTruckАй бұрын
Yes, but he always ran 93 before anyway so no change, his MPG is only like 10
@lucasdriskellАй бұрын
Thank you for explaining not only how to do it, but also why you're doing it! I didn't fully understand why people worried about their rear track bars until you explained it.
@EvilleTruck11 күн бұрын
Thanks, Glad it was useful information.
@EvilleTruckАй бұрын
Track bar bracket is available on Amazon at amzn.to/3xC25fx
@technicaldisastersАй бұрын
My buddy just went with the triangulated four-link and loves it.
@EvilleTruckАй бұрын
Yeah that does look very tempting
@MrDoom6969Ай бұрын
Hey Bill...Love your videos..Just wondering if you could make a step by step video on changing front and back brakes on a 2021 - 2022 Ford Bronco..I heard you have to put it in maintenance mode? Thanks Bill
@EvilleTruckАй бұрын
Thanks appreciate you watching, I actually just bought new pads to do just that
@MrDoom6969Ай бұрын
@@EvilleTruck Great minds think alike.Thank you
@timjackson4927Ай бұрын
Look into rockrawler triangulated four link, and you can eliminate track bar all together!!
@EvilleTruckАй бұрын
I have , and have heard some great things about it . Something to consider for sure
@gsxr1000jtАй бұрын
I have a 21 f150 same screen size as yours/non b&o I want to add my sub and amp. Will these forscan audio mods allow all the bass frequencies back like my aftermarket deck would? I'm aware the trucks OEM speakers are trash but just want my non controlled eq and volume back ie: all bass frequencies back.
@breaddrinkerАй бұрын
I got my box in the mail today and notice it didn't have the flat bracket pieces, that you also didn't seem to use in your install. They're listed in the install manual as parts, and you also have them. Any idea what those parts are for? Kind of hard to describe them. They're the square plate pieces. Almost square in shape with a single edge at a 90. One slightly angled more than the other. You have them in your video laying on your garage floor before the install... You didn't use them, and I don't think I see them used in my instructions for the Bronco either. Only listed. I seem to have absolutely everything else.
@EvilleTruckАй бұрын
I'm not sure which pieces you are referring to as I think I used all the pieces it came with, if want shoot me an email at [email protected] that way I can respond with some pics if it helps .
@breaddrinkerАй бұрын
@@EvilleTruckI will. Thank you. I'll send you a picture with the part I'm missing. I swear I can't find you using them in the video though... Or in the install steps in the manual, though the pics are dark... Email on it's way.
@breaddrinkerАй бұрын
Many thanks for the help, Bill. Update for others... I was seeing the foam pads as brackets. They look similar from the pictures and they lay them out with the metal parts in the parts list. Slight fitment issue with the hard top latches at the front, but otherwise a very simple install. Really, I could have lived with that clipping the panel either way, but decided to trim and paint it so they cleared. They fit with the roof on either way, just clip when rotating for removing and reinstalling. You're right. It really stiffens up the bronco. A lot of shuddering has vanished. I'm happy with it.