elubb

Пікірлер

@marukothekid Ай бұрын

Hi, I don't see any information on the wiki page. How's the heli flying? Is it with or without RPM sensor? What ESC are you using for main motor? BLheli-S with bluejay? brake on stop setup so the motor can spin freely? So many questions I'm having!

@elubb Ай бұрын

Thanks, the page was moved to rotorflight-old-wiki. I've updated the link. That wiki page describes how to set it up for RF1. RF2 is slightly different. If you have any questions about RF2, please join the Rotorflight Discord.

@marukothekid Ай бұрын

@@elubb Thanks a lot! I'm very familiar with RF2 and K110 stock/modified. And I'm really interested in K110 running RF2. Upon reading the page, all my questions've been answered! Superb! Thanks man!

@hekikuu Ай бұрын

Why not an AIO FC? Would be lighter and cleaner?

@10fantic 2 ай бұрын

So cool!

@cwartv4937 3 ай бұрын

How to do video?

@elubb 2 ай бұрын

LEDs: www.rotorflight.org/docs/Tutorial-Walkthroughs/led-strip-quick-start

@cwartv4937 2 ай бұрын

@@elubb ty

@fklotaloi 4 ай бұрын

Hi video uploader, Do u join the Discord channel ??? Yr video seems to be interesting , interesting me to built a custom FC for a micro heli.

@glenncain 6 ай бұрын

will you look at that. servo centering on lua done in a couple of days. that was fast! nice work

@adakalyoncu1913 6 ай бұрын

Could you make a tutorial video on how to add 3D to a stock tinyhawk 2 freestyle? How do we get from stock rtf kit to this?

@elubb 6 ай бұрын

The trick is to make the motors spin bidirectional and get equal thrust in both directions. The fundamental steps are: 1. Flash Bluejay 0.21 using esc-configurator.com and set the 'Motor Direction' to 'Forward/Revers (3D mode)'. 2. Reverse the props on motor 1 and 4 OR on motor 2 and 3 (take them off, flip 180deg, then mount again). 3. Configure Betaflight for 3D mode on the 'Motors' page. I've also enabled 'Bidirectional Dshot' and 'Gyro RPM Filter'. Now you should be able to arm with the throttle stick in the middle. Throttle up works as usual, throttle down will reverse the motors.

@miroheymann5882 Жыл бұрын

Hey, did you fixed it somehow?

@Rip_WathaGeplays Жыл бұрын

Pas op he

@hekikuu Жыл бұрын

Incredible! Amazing that this tiny helicopter can lift that.

@14HELIKOPTER 2 жыл бұрын

How is standard thrust?

@wibbyarief8958 2 жыл бұрын

is it possible to compile custom F3 board?

@jerrypatterson55 2 жыл бұрын

can you show me how to set up a copter in rotorflight i have a eachine e160 im going to be using the baro id like it to hold height while i fly so step by step could you lead me in the right direction

@elubb 2 жыл бұрын

Join Rotorflight on Discord, discord.gg/nB36tu542a

@markusleonhardt2735 2 жыл бұрын

That's super cool, I hope this project will become competitive to the big brand FBLs

@avivsan1 2 жыл бұрын

Which FC do you use?

@elubb 2 жыл бұрын

Play F4.

@flyingskwerrl 2 жыл бұрын

Brother.TY

@konghugo6534 2 жыл бұрын

What props did you reverse? And can you do a tutorial on how to do it

@elubb 2 жыл бұрын

I reversed M1 and M4, but you could also reverse M2 and M3.

@InfinityDrones 3 жыл бұрын

what is your cpu %? On my TH2F if I flash my Esc's with Jazzmaverick 16.77 to enable RPM filtering I get 100% cpu load when bi-directional dshot is enabled.... The only way I can have bi-directional dshot enabled is by having my gyro at 8k and my pid loop at 2k. I also need to have my accerlonometer disabled to get under 30% cpu load...

@elubb 3 жыл бұрын

Try BLHeli_M 16.9. With 8K/4K loop, accelerometer enabled and RPM filters I get: - around 32% when using DSHOT600 - around 26% using DSHOT300 When I use a 8K/2K loop, CPU usage is under 10%.

@InfinityDrones 3 жыл бұрын

@@elubb I tried... Really wonder what the issue is... With 16.9 I get 100% cpu... So needed to drop to 4k 4k to get under 30%... What else could I do?

@elubb 3 жыл бұрын

@@InfinityDrones Have a look at my dump: drive.google.com/file/d/1qxfj6GKzZJqcvolic5Y0Ct6GksQ916sJ/view?usp=sharing

@InfinityDrones 3 жыл бұрын

@@elubb Thank you very much! Fingers crossed it sorts out my issue!

@InfinityDrones 3 жыл бұрын

Only thing I'm thinking now is that I'm still running stock betaflight 4.1 and you're running 4.3..

@epulotuschannel8116 3 жыл бұрын

Do you change the tail boom?

@elubb 3 жыл бұрын

Yes, it's now 24cm long and has a custom made mount for the brushless tail motor. 24cm is a bit long, 22cm would work as well.

@Rosie-xm2yd 3 жыл бұрын

Niet vervangen allen netbeheerder nag alleen doen

@Sick1982 4 жыл бұрын

Super dit clipje: ik ben zelf naar een mogelijk lek aan het zoeken, en zag slechts op 1 plaats heel even wat mini broebeltjes en twijfelde of het gewoon schuim was, wat lucht van in de draad, of echt gas... maar dit heeft me geholpen te besluiten dat het daar dus al geen lek was. Bedankt!

@willwinardi9627 4 жыл бұрын

Hello, can you do a tutorial in the future? Really intrested in the tail rotor setup, thanks

@jefersoncastro8005 5 жыл бұрын

beleza preciso do radio controle aonde eu compr

@PlakToetsBart 5 жыл бұрын

0:12 Volgens mij ook!

@nikzegthoi2235 6 жыл бұрын

Nee dat is het niet

@chriswilson4614 7 жыл бұрын

I fixed mine today cleaned the wheel sensors and also the bump sensors .

@sglebsing 7 жыл бұрын

How did you fix it? Did you replace the sensors? Which ones? Where did you get spare parts?

@skydiver171 8 жыл бұрын

cool Gratulation, only the Nose is little bit to light

@stefanie_m466 9 жыл бұрын

need to run behind it . haha , some sht law in the benelux that toys are not alowed to transmit further then 30 feet , sinds 2015 the law changed it to 5 feet . insane world isnt it.

@DJmonsty 11 жыл бұрын

one of the wheel sensors is bad; you will need to replace both wheels

@chris24542 11 жыл бұрын

Go home roomba you're drunk

@GitUke 12 жыл бұрын

You made this very well, but it isnt a good idea because 1. It needs electricity from the battery and flight time decreases and 2. You may be able to see the plane in the dark, but not the trees ;)

@ilovetodraw555 12 жыл бұрын

how much battery life does that take away?

@zubinmathoera 12 жыл бұрын

Kijk eens of je moter niet scheef staat

@gautam456 12 жыл бұрын

Is that the stock battery of the x-twin or you've upgraded the battery ?

@tlaroche38 13 жыл бұрын

I have the same one, it works absolutely perfect!

@traxxastmax1 13 жыл бұрын

its been drinking:)

@rotagen5 13 жыл бұрын

Mine is going to be a machine for high winds. Its gonna be higher wing loading and way overpowered. I'll post something if it flies well.

@rotagen5 13 жыл бұрын

I forgot to ask. HOw does this one do on a windy day.? I needed something tough and small for wind, so I ordered one. I guess if I fly fast enough I'll be OK.

@rotagen5 13 жыл бұрын

9gm motor sounds too small. I would go with a 15-20 gm motor around 2000kV

@leandeganis 13 жыл бұрын

kick it

@stefanie_m466 13 жыл бұрын

how much further goes it with the capacitor mod?

@legovogel1 13 жыл бұрын

ah godver xd hahahah

@desidudes78 13 жыл бұрын

Hi, great flying! nice vid! I was thinking about getting one of these and i was just wondering about how fast they can go? and does it come in a bind and fly version as well? thanks, looking forword to some more videos!

@Lonewolf2201 14 жыл бұрын

@samunro01 All single rotor heli's want to go left at take off because of the talk of the rotors, so don't worry to much its just physics :)

@EliasOwnage95 14 жыл бұрын

damn the site is in german

@elubb 14 жыл бұрын

Search for PKZ3016. I bought 3 of those on myatomic, shipping was around $8. It works perfect.

@cristianoid 14 жыл бұрын

heyyyy , what about the brushes ^s motor , with time the brushes runs-out its a very tipicar failure that brushes motors suffers when brushesh are runed out i hope it cuold help you in fact my cuestion is, where i can buy a replacement for motor (brushes, runed out) sorry my english!!!

Ең жақсы KZfaq

Пікірлер