Can you make a video explaining vehicles that have BCM and which type of LED work with these vehicles.
@ArunaVidu7 сағат бұрын
How about putting an led bulb in the classic housing instead of the halogen bulb. And how would that be vs the these options...?
@oakkblackbird7 сағат бұрын
HIDs still has a better output IMO
@bgdogy15 сағат бұрын
One issue with these hitch mounted lights that tap into the 7 pin harness for some trucks, is that it thinks you have a trailer attached and you keep getting trailer warnings. Diode Dynamics has a fix that uses an included wire that plugs into the harness then you have to route it up to tap onto the brake light wire. They also offer a way to stop the strobe when you first hit the brakes if you don't like the strobe feature. Another thing, all these guys make it look easy to route the wire through the hitch, but if you have a hitch like mine, it is solid metal at the back, so you have to drill a 7/8" hole to get the wire in.
@goblin381019 сағат бұрын
Its all Overpriced.
@gagenorthrup609723 сағат бұрын
Is there a way that you could make it to where there is no amber yellow on the turn signal, and the side light?
@josephdickerson990223 сағат бұрын
I see your set banger bar sets but how do I do the mix and match thing on your website?
@FabianClark-bl5wfКүн бұрын
Only gotta pay 650.00 for something that cost yall 500 less.
@wyslink9354Күн бұрын
Nah you bs
@julianescobar7506Күн бұрын
What seat covers do you have
@daggerzzКүн бұрын
going to mount 4 HELLAS facing backwards towards those glaring idiots
@wjm3018Күн бұрын
HID becoming obsolete and consumers choosing Leds. You can get decent $10-20 pair of led in the market and is quite bright
@wjm3018Күн бұрын
Hid was popular 10 yrs ago but led is now the new gen. Very easy to install vs hid with all the wire to install. Almost same brightness.
@rudydaberry122Күн бұрын
Do the euro adapters fit 2020 GTI to retrofit LED bulbs
@jeremiahcain2683Күн бұрын
Soo.. Shotguning light is bad?.. 🥲
@topreventretaliations3590Күн бұрын
But dude, the whole point of buying the brightest LED Bulb for me is to blind other drivers like they blind me! It doesn't matter what you say about not blinding others because unless earth is completely FLAT not blinding others is out the window...
@ossef97122 күн бұрын
Nice minus snorkel
@BramtheMan12 күн бұрын
I couldn't find a bulb for this vehicle on the website or through the links.
@craigmack488582 күн бұрын
What kind of rims are on the truck, I like them.
@alankirkham55982 күн бұрын
My Alpha Rex low beams went out in less than a year. Not impressive
@armadillotoe3 күн бұрын
So you are saying I may want to replace my 22-year-old OEM halogen bulbs? Are you saying my night vision may not have degraded as much as I think? Cool. - - - - 72 year old guy. Don't you have problems putting an LED bulb in a halogen reflector? Does the throw pattern tend to blind oncoming drivers?
@csproductionsMS3 күн бұрын
Thank you so much for the tip on re-pinning the turn signals. I had been looking everywhere online on how to fix the lights where the blinkers would work with the headlights on and that did the trick! Thank you thank you thank you!
@nelsonbrum84963 күн бұрын
2003 GMC Sierra SLE: I recently swapped my flasher relay to a NOVITA LM487 LED compatible unit. I had previously swapped over the rear running/brake, backup, & frt side marker lights to LED units. After installing the flasher relay, I upgraded the rear turns and the front running/turns to LED switchbacks. That evening driving home, i noticed that the side mirror turn indicators, and in-dash turn indicators were faintly illuminated. As soon as I got home, I swapped the front switchbacks back to incandescent bulbs, and the side view & in-dash lights went back to normal. My question: Is the feedback from the switchback LEDs going to f-up my electrical, and is this a "normal" or common issue? How do I get LED frt turns without any problems?
@tecnoworld53243 күн бұрын
excellent video, very useful.👏👏👏👏👏
@garybray36144 күн бұрын
Is this one of those that blind me in broad daylight? Talk about causing road rage. These bastards should be illegal if they already are not. Stop causing auto accidents due to blinding the on-coming driver. Bragging about brighter is wrong. You are the problem, not the solution. I am getting sick of having spots before my eyes like accidently seeing welding without protection. When are the class action lawsuits starting? I want in.
@kodilindman13444 күн бұрын
I am having issues with my flashers, and turn signals. I have leds in all my lighting and I hooked up resistors to both headlights and taillights. It worked just fine until two days ago!!! In the morning my flashers are dimly lit on dash but I have no flashers or turn signals. But later in the day then they work.. I’m stumped
@tonyfon56684 күн бұрын
Send me a pair for a great review
@protestthisyouloser10935 күн бұрын
Not good for 06-09???
@HeadlightRevolution4 күн бұрын
You can find the kit for the 06-09 here: www.headlightrevolution.com/2006-2009-toyota-4runner-Xenon-Depot-Xtreme-led-pro-low-beam-?quantity=1
@bobcekmilan5 күн бұрын
Hi, can LED cause a heat fire? For example one without a fan? Possibly heat damage the light?
@HeadlightRevolution4 күн бұрын
If there is no heat control, absolutely!
@bobcekmilan4 күн бұрын
Standard h11 leds (no fan), but "fast heat dissapition", but 360°. Halogen vs leds heat?
@johnnytrain24725 күн бұрын
great informative video!
@young_simba63745 күн бұрын
Will they work for me? my stock is h11c? Not sure if it will fit?
@HeadlightRevolution4 күн бұрын
Yes, these will work! www.headlightrevolution.com/h11-h8-h9-ultra-series-bulbs-LED.BUL.H11.ULTRA_2?quantity=1
@ghostiroc5 күн бұрын
We're can I get the splitter harness
@HeadlightRevolution4 күн бұрын
The splitters are available here: www.headlightrevolution.com/Sealed-Beam-Holley-RetroBright-LED-Headlights-4x6?quantity=1 If you need just the splitters, please reach out directly: [email protected] or 218-755-5200
@h1glu2026 күн бұрын
future reference, most people are looking for more side by side functional comparison...
@jarrodsimmons53496 күн бұрын
Do i use this same method to aim my highbeams as well?
@HeadlightRevolution4 күн бұрын
Yes, high beam follows the same method.
@cptgohard80626 күн бұрын
Any know the size of that nut I lost one lolololol
@miguellozano71306 күн бұрын
Links to buy items ?
@HeadlightRevolution4 күн бұрын
You can find the interior upgrade kit here: www.headlightrevolution.com/HR-07-13-Tundra-Interior-LED-Upgrade-Kit?quantity=1
@AjithPeiris6 күн бұрын
Great advice
@MariaRivera-xc3hu6 күн бұрын
What a complete and well explained video! I was lost trying to find the right ones for my car, but you definitely cleared my doubts! Well done, man, thanks!😊
@HeadlightRevolution4 күн бұрын
Glad it helped!
@nicholkid6 күн бұрын
big sigh because my headlights require significant dismantling to get access to the adjustment screw. Also I have no ideas where I can find 25' of flat ground with a wall at the end as I don't have a driveway. Surprisingly difficult scenario to find out in the world.
@HeadlightRevolution4 күн бұрын
Loading docks behind stores are great!
@rudydaberry1227 күн бұрын
My dad has a 2007 dodge ram 1500 and he bought sone cheap led bulbs and when we installed them the lights only turn on for a couple seconds than shut off until you turn the key off then on. I then bought these resistors kit for the bulbs and now they work but they are stuck in high beam mode and when you hit the high beam switch the low beams come in for 1 second then go back to high beam mode. I now just bought some pwm modules to see if those will work
@HeadlightRevolution4 күн бұрын
Sounds like the PWM Modules should fix everything!
@bcservicesrosarito7 күн бұрын
Thank you!
@HeadlightRevolution4 күн бұрын
You're welcome!
@danelswick98867 күн бұрын
Great video Do you need a resistor on the brake and backup light? Also, inquiring minds wish to know - what did the second resistor in your truck hook up to?
@HeadlightRevolution4 күн бұрын
Resistors are most recommended for turn signals, and occasionally brake/reverse lights. You will need one resistor per bulb.
@5.7daniell7 күн бұрын
Great video
@HeadlightRevolution4 күн бұрын
Thanks!
@drew59927 күн бұрын
What about the bulb that has about 5/6 wires???
@HeadlightRevolution4 күн бұрын
It would still be the same, you're searching for the wire that provides power during turn signal function.
@gsgcarreviews7 күн бұрын
"First thing we need to do is wetsand the FFFFF-ront" Lol though that was going elswhere
@bryanjones88218 күн бұрын
I’m in a 2010 Tacoma prerunner that has DRL that are also the turn signals. I’d like switchbacks that are white DRL and amber turn signals. Is there a bulb I can get that doesn’t require resistors ?
@HeadlightRevolution4 күн бұрын
We suggest the XB LED Bulbs! www.headlightrevolution.com/3156-3157-Morimoto-XB-LED-Bulbs-Resistor-Free?quantity=1
@hassanquraibah25568 күн бұрын
I think this video should be removed, considering the latest brands of cars considering LED over HID , technology is improving design pioneers had flaws LED btr brighter and last long
@HeadlightRevolution4 күн бұрын
Headlights with built-in LED Technology, which is what new cars have, is vastly different than LED bulbs replacements.
@hassanquraibah25568 күн бұрын
7000k btr brightness unfortunately it's hard to get Another point is lumens/beam strength in metres as well power/watts
@calebladd40828 күн бұрын
Your bulb grease is white but the crap they give me at AutoZone is not. Why?
@HeadlightRevolution4 күн бұрын
Dielectric grease comes in many different colors - Morimoto made a green one 👀