All this video proves is the puddin' was tainted/biased. Funny how you made it seem the top competitors product failed first. I've used Morey's/Lucas Oil Stabilizer for about 50 years. The proof is setting in our driveways along with my our customers till this day. Prolube = unbelievable

The real winner was mobil 1 motor oil.

Did you watch project farm?

Confusing 🤷‍♂️

a thicker viscosity oil is probably the reason the prolube won but this channel is prolube so its biased test.

The test conditions here are pretty lame. It would have been better to run the engines for a day then check compression and cylinder heads/valves of each one. Then run each one of the oil additive mixtures to see if they do what they say. Most of them claim to clean and increase compression. Keep in mind modern oils already have detergents and depending on which ones you get are long life high temp. BMW and other german cars recommend only long life "EURO CAR" blends because they have higher specifications. Whenever possible use a "EURO car" formula in your 4 strokes as they are much better oils with better high temp wear. They are designed for twin turbo engines.

"And it'll work....... Wonderfully"

vs Amsoil?

Someone please tell me what this stuff smells like. I really think it's McClure's CE10, from what I've seen and what I've read about it.

Works great if you never add oil to it

Yeah, mix it with oil and it doesn't work as good . Snake 🐍 oil

Google says pro lube is carried by AutoZone and Advance auto, yet when I check their website NOTHING.

Whats the point if you didn't use Amsoil in this test, you guys afraid of Amsoil ?

So prolube did there own test, OK

One of the best FAKE videos I have seen in a while.

The next time I'm thinking of running my engine withut any oil, I'll make sure I add some Prolube before hand. Not that this video is biased or anything, but Lucas Oil Stabilizer is the best. It has been proven in many videos that were unbiased. I like how you Prolube guys ran the Lucas Oil engine without any oil for 12 hours, instead of the 3 hours that you ran the Prolube engine.

Oil supplements are not needed. The motor oil alone from the bottle is the way to go. Mobil 1 proved this.

Oil alone isn't enough? Yes it is. Just don't run a engine without it 😂

First thing I noticed was that using Mobile 1 synthetic oil for break-in is a NO NO! Usings synthetics on a new motor will take much longer for bearing/rings to bed in, if at all! And 2nd, Lucas also makes a synthetic oil additive. Why didn't you use that instead, since the other additives were synthetic? Just saying!!!

Fake propaganda video guys 🥸

A good product for machining .

I'm going to ask ONE LAST TIME. Please please answer. What would happen if I ran one of my engines ENTIRELY on Prolube? Thank you.

This test was rigged😄

Next time I run my engine without oil, I’ll make sure to get some..😒

Great 👍 I would love to see it test against Prolong and Motorkote

id like to see it go head to head with motorkote

I'm going to predict that the prolube works the best!🎉🎉🎉

Bitron is an excellent additive. Shame they fkd 4 good engines. Should of just done a load bearing test. Bitron. Smiths lubricants Australia 🇦🇺

This is a joke right? Just having fun seizing Chinese engines, these results are completely invalid. How are you verifying the machining differences in the engines? Or the many variables taking place off camera?

You are not to run engines without oil! This is a marketing vid. A true test would be long term and a oil analisis and tear down and wear jus saying

My brother swears by your product. He runs it in his cammed hemi. I probably get some now

So this was a cool and fair test..however... what I'd like to see is the exact same test, run 3 different times. I've never been one to believe a single test. To be fair, that time they each lasted was significant for Prolube, and even Mobil1 by itself. What does that say about the additives? Either a fluke, or Mystery and Lucas are WORSE for your engine than standard oil by itself. Hence, running the same test at least 3 times. if you got the exact same results, it'd be pretty concrete at that point! Def looking good for Prolube!

I have a feeling that ZX1 Extralube would beat the Prolube..Why not test it and see?

kzfaq.infoNkyS_GNJyF4?si=H6Bqjrwd78RNphov

It's only good by itself for bos men tested it with the application ratio you recommends and other products did better on the Timken bearing scar wear test.

It's going to be part of my oil maintenance on all of my vehicles

Motorkote Hyperlube would have lasted longer 😤

Where your product is available?

Redline oil?

Now bring those motors back and warranty them😂😂😂

He'll yea man!!!. Almost can't wait to change my oil again just so I can add some in. Lol

Hopefully people understand. This is a torture test. Nothing will make the engine last for ever. But prolube definitely is on top.

I ordered some 2 weeks ago. My old 1990 gmc truck started to burn oil after that 300k mark an sitting as i was driving my winter/ mud toy. Started to burn oil. So naturally i tried everything the auto parts stores had. None of them worked. I ordered some prolube an lets just say its burning clean with some improvement on cold starting power and mpgs. I knew the rings were stuck. I always do oil changes every 2,500 miles no matter what. Being a mechanic by trade. I can easily do a in frame rebuild. But as most mechanics we are to tired to do things like that to our vehicles. So prolube for the win. I'll definitely buy more. An probably buy the 55 gallon drum for the fleet vehicle an equipment

Fantastic test. Been waiting for this one since end of last year i think it was when i seen yall bought the motors

لوكاس سيء

Also 10% is 1.6 oz not 2

No ...10% prolube for that 16oz capacity would be 1.6 ounces of prolube. The back of prolube can says nothing about 10%..it says 1 ounce per quart... For heavily when engines add an additional ounce... Which I assume means 2 ounces per quart..that would make your amount of prolube for a 16oz oil capacity engine at 1 ounce prolube for that 1/2 quart engine. Think you better change directions on can

Okay Okay, NOW I’ll buy some ProLube.

Yesss for the win bad ass let's gooo

This comparison was the best one yet hats off. Only question is why have a minimum and a maximum ratio if it takes the max to get these results?