Have you got a video on a speed fighter 2 that use to do over 30mp now all of a sudden it doesn’t, what could that be or a vid on here to look for to watch?

Tidy TDI?

Why is that the v clic don't have a starter solenoid on it be other bike do any help

Very helpful 😊

hi i have the same problem with aprilia ditech. I put a new spark plug in the engine, the engine runs for 10 seconds and then shuts off. The spark plug is black and burned out. Where is the problem?

How to change taillight speedfight 4 2-takt 50cc ?

Thanks never thought to check if the wires were backwards, i had issues starting. Put my hand over the carb and it fired up thats how i know my choke isnt working right

Bin the stock pipe, remap it. These bikes are massively restricted in 1st, 2nd, 3rd and 6th out of the factory, you are robbing yourself of the experience by not doing it. Figures with a flash, air filter and pipe breach 160rwhp, more than a gen 1 hayabusa puts out. It's possible to do all of the work for about 500 quid, which for 20 more horsepower, a smoother ride and a lighter bike is a small price to pay.

42psi front 42psi rear fella...

Hi, i have a question, im hoping you can help with it. We have just purchased a peugeot speedfight 2 50cc LC for our son to use to get to college and back. We have put a new battery in and replaced the starter motor. Everything worked perfectly. It's not been rode yet. Went back the next day, and the battery was flat. Put a spare battery in. Everything worked again, then the next day flat again. Any ideas? Many thanks.

Hi...Is there much difference in legroom.?

I took my side cover off and removed the flapper cable at the servo. The flapper stays open all the time now, I get a nice little bump in sound, and it seems to run smoother as well. And it cost me nothing.

I have the same problem as you. My chickens steal my 5-minutes of fame😂

Good video very informative

I have an Audi A4 2ltr 190bhp 2017 and have used this Mannol 5w30. So far so good, the only thing I was told that is won't protect your engine like Castrol will.

Because BMW wants you to service their cars at the STEALERSHIPS!!

I’ve just got a Speedfighter 2 50cc it starts but after 2 minutes it cuts out then won’t start for 5 minutes any suggestions on what it could be

My Piaggio NRG as soon as started cold can accelarate up to 70km/h when I slow down then accelarate again it only goes up to 40-50km/h and only reaches up to 7k rpm. What could be the possible problem and fix??😁

You do mean scrape and your not going to scrap it.

Hi, I have a 2018 Fiesta Zetec, I been told by a garage that I need both front lower ball joints, claiming the rubber is split on both and leaking grease. I haven’t noticed any change in the steering, it’s not loose, and there is no noise. They have said the work will need to be done for my next MOT in September. Any advice on whether I should get a second opinion? I’ve not used the garage before, I was just having free health check. I moved to a new area 18months ago, and haven’t got a “ regular” garage yet. Thanks, Kerry.

Hey i have a problem on speed fight 1 i can not fix the ignition thing on it and its a diffrent thing compared to yours please help anyone!

Hiya mate my front break lever is sitting just loose off the front break switch meaning my rear light is always on how do I adjust it to sit properly/ stop it from being loose

Love the Chicken Mate 😅😅 Oh wait....Love the Chickens (Plural)😂 I'll check my carb mixture screw on my carb.

Hi man this is a really out of topic thing. But do u know what is the problem on my sf3? I recently bought a tecnigas next r exhaust and a 70 main jet. And on top of that I removed the oil injection system because I trust premixing more. Now it wont start at all after putting them on. The spark plug was working fine before the oil injection removing. Ive checked messing with the carb, nothing. Trying the stock main jet, nothing. Tried to start without a air filter, nothing. Could it be a mechanism within the electrics that it wont start after removing a component?

I need my head tested, this 2 stroke 50 I am working on is really testing my patience.

This 2t is driving me crazy.

I bought a speedfight 2 a couple of months ago and you helped me sooo much mate! I hope you get well soon ❤

I bought a speedfight 2 a couple of months ago and you helped me sooo much mate! I hope you get well soon ❤

Hi mark did you find manage to seal up the hot pipe issue Mines leaking now and just curious how you got on with a re seal

Thanks for the video Mark! What advice could you give me on buying a 2011 1200GS 30th Anniversary with 118k kilometers for around 6k euros?

68 maint jet for sports exhaust mate

Its June 2024, and I am looking at a 2004 1600 with 31K miles. Garaged, stickered. Looks great, runs great. $3250 out the door.

So you just cut the wires of the oem plug and connected them to the new provided plug right ? And just taped them up ? Looking to do the same.

Wow, just wow 👌 👏

Be original, who wants to be vanilla, no me!! Be a one off and love life , haters scroll on !!!

Beautifull car. Only negative in my eyes is she’s auto. My dream car 2009 ls3 manual.😍👍

I’ve a sr50 it starts just splutters and won’t move it’s a ditech model unsure what to do

Best vid on this !! No music, just good info ! Thanks bud

Imo it’s personal preference. I have mixed without any problems especially in the early days when I couldn’t afford anything else but to mix however these days if I do I always do my homework first and the type of riding I do on that bike. For me for pure sports bike or long distance touring I use sets only but everything else I do mix from time to time and over 40 years later I am still here.

Hi Mark I have a peugot ludix my self changed carb vacuum and can't get min to run it turns over

hi mark, I have a problem with my Speedfight 2, I changed the crankshaft and a little all the scooter but once finished the work and started immediately but after did not want to leave, I have compression spark and fuel but the scooter does not want to start, i hope you can help me

Fucking A Cool.

Are you on Facebook mark.

I bought a 2006 model in Arizona from the original owner ......tell me if you like her ........kzfaq.info/get/bejne/r7yUnrKj0cmqo5s.htmlsi=qwlWsDMjWcGuB0ld

Top one mark hope your appointment went good bud 👍🏻

cover your plate bud.

Nice video but I'm sure the 600 gixxer made more than 95bhp. They're definitely comparable to a zx6r or cbr600rr (both around 120bhp).

i have the screen on, great for bugs and gravel flying...

The cover in the variator is stuck om my moped and i cant get it loose

My moped seized a few days ago today me and my dad filled it with about 4-6dl of oil and continuously used the Kickstarter until it run smoothly, and almost started three times. He is going to buy a new start plug tomorrow so we can see if it will help. I really hope it will, i dont want to buy a new moped sese i have had it sence 2019 and its my second moped.