Thank you very much for taking it all the way through how to load the generated files back onto the lowrance unit. Super helpful!
@Trophybearer2 күн бұрын
Great help thanks! Will try to dial it in tomorrow. Can’t get my a-scope clear enough and no depth on plane…..
@dburg793 күн бұрын
Great video!
@coronafrancesco32709 күн бұрын
💪
@thedutchfisherman707811 күн бұрын
So they have these units for 10 - 14 years now and they still don't know how to use them?! Quite impressive. 🙄🙄
@hookedntravel8 күн бұрын
@@thedutchfisherman7078 I know. Some people are content with just a bottom reading and map. A lot of these units still out there.
@henryclark548612 күн бұрын
Hey, I have the Ti2 12" on my boat. I can not get the depth number to show on the screen when I get my boat in the water. I've already watched the Ti2 setup video many times. I've also checked the number on the transducer cord, and made sure I have the unit set to that number. All the unit shows is the Depth word with the three lines. I have two of those units for over a year now, I don't know what to do.
@hookedntravel8 күн бұрын
@@henryclark5486 are you loosing it on plane or just idle in the water? Have you checked what source the unit is looking and is the correct one? Properly networked to that unit? Is the network for internal sonar channel 1 and 2 on and able to network (in the menu system)?
@2dleavitt14 күн бұрын
Great video/instructions ! Thanks
@GeorgeHuber-z5i14 күн бұрын
Way to complicated. Just need basic settings.
@hookedntravel8 күн бұрын
@@GeorgeHuber-z5i yep if that’s how you like to use it. Very user friendly units. The folks who want easy, generally aren’t looking at KZfaq videos to up their game and get the most out of these units. Cheers!
@alvin1364able17 күн бұрын
You are a total wealth of info sir....thank you!!!
@guidelife596118 күн бұрын
Great video once again mate! Cheers
@johntyler457018 күн бұрын
wicked!
@alexkyle990018 күн бұрын
Thanks For the video. Run HDS's but this still is such a great vid Jos!! Always wanting more!
@outdoorsnwild834418 күн бұрын
Another Amazing tutorial, so many nuggets of great info packed into each video you guys put up! I am thoroughly impressed!
@Crushin12321 күн бұрын
Sooooo many things to keep adjusting - I am probably the only one, but I like the old school simpler sonars - I will find the fish if I can see structure clear enough. All this time learning and tweaking could be used for 'on the water' time. Good video however and much appreciated - it saved me a lot of money as I was considering sonar upgrades etc - I may just find what I have, with a bigger screen and be done. Thanks for all the time you put into this.
@hookedntravel20 күн бұрын
no problem glad you enjoyed it. Mind you this video goes from beginner to super advance techniques. Most users will only need the first half at best. The active target is super user friendly and designed to be of all the brands. You don't have to keep adjusting to be honest. This video was done for beginners to super advance at the high performance level. My biggest thing is jump in someone's boat who has one and see if its something you will use. Cheers
@ralphdetloff830022 күн бұрын
Thank you sir for an outstanding to the point tutorial. I have searched many times and finally foud exactly what I need .
@hookedntravel20 күн бұрын
glad to hear that. We hear that all the time.
@Domantk24 күн бұрын
hi, I have done everything like you, everything seems working. but my black box power litght is RED. whats the problem can be?
@hookedntravel24 күн бұрын
error of connection of some type. Are all your leads to the battery properly done and not loose?
@Domantk23 күн бұрын
@@hookedntravel everything is good. Everything is working but power is red light.
@PaulGreenaero24 күн бұрын
Tight lines. Love it. My social map is missing major detail - Like large islands. I get this is a fishing tool But shouldn't the downloaded map have the same level of detail you see on the website? Btw, I have full detail selected. What am I doing wrong?
@hookedntravel24 күн бұрын
my main lake didn't have some massive islands either in there and had small islands done. you just email or flag it for tech support on your map and request they do the outline of the lake for your map. They do it usually pretty quick and when you redownload its there.
@JAdame2428 күн бұрын
Can I download public c maps on my Hook 7x Reveal TS? It says it only records onto the SD card. Can it also read files downloaded from the c mapping community?
@hookedntravel27 күн бұрын
theres a list of all compatible units on the website for cmap genesis. Most units nowadays are compatible with the maps that having the mapping feature
@samelgore757528 күн бұрын
how does he turn the machine on indoors with no GPS signal. Mine keeps saying no satellite signal.
@hookedntravel27 күн бұрын
just acknowledge it, it'll have a little bell icon on the bottom left, just ignore it and keep along with the video.
@derekpierce458629 күн бұрын
On the charts the maps shows the river being the actual size to scale and when I get up river a lil bit it goes to a very thin blue line for the river .
@goktu0129 күн бұрын
Graet tutorial, though I have got a question and glad if you answer. does that side scan and down scan work effectively for100 meters of depth? Thanks
@hookedntravel29 күн бұрын
yes but you've got to under stand your limitations. 455khz is going to have more range and deeper penetration but not as much details. You're going to have increase the contrast quite a bit. You are probably at the sidescan and downscan limits though
@sebastianbagge582129 күн бұрын
You are a legend man, thanks so much!
@brucehoffman7063Ай бұрын
Great information! You’ve answered a big problem I’ve had from the marine boat dealer I got my hummingbird helix and depth finder from . They said I’ll have to get another depth finder! lol they don’t know what there doing. The told me to go out to the lake and try it. They don’t take them out and see if it works. Dang ! I got the y connector. Just need to get other transducer, thx I subscribed and I’ll be back! Thx! I’m the 69 year old fisherman! Keep the faith! 👍🥸🙏
@hookedntravel29 күн бұрын
awesome, glad to hear.
@neilgrubguts9270Ай бұрын
Great video, thank you for taking the time to get people going and set up, could you tell me what model high speed do i need to suite one of the newer helix 8 gen4. Cheers and thanks again
@hookedntravel29 күн бұрын
high speed transducers?
@antonioGomez-nj2itАй бұрын
Buen video amigo 👌 . Mi xi5 va perfecto el único problema es que al año de tenerlo el pedal dejó de funcionar y no he conseguido hacer que funcione solo me queda la actualización tu crees que funcionará?? Haber como es el servicio técnico en España pero no creo que me manden ningún dongle para actualizar 😢. Con el mando si va bien no hay problema es solo el maldito pedal😂
@hookedntravel29 күн бұрын
you can try to update it via a lowrance unit. But it's probably unrelated to the motor itself. Replacing the batteries and making sure it's synced first before trouble shooting the motor. The foot pedal may be the issue.
@donaldmartin4980Ай бұрын
Thanks for making the video I truly needed to see, I will rewatch it many times while resetting my HDS-12 live. Thanks sooooo much !
@andrewcarson9068Ай бұрын
how do you get the simulator to work
@hookedntravelАй бұрын
Dont program your unit in simulator mode. It will loose the settings. Keep it in regular mode. We only do it for demonstration purposes only
@kirkmarsh241Ай бұрын
Can you read a Loretz HDS Pro 9 and use the 3-1 transducer next to a hummingbird side imaging transducer without getting any interference
@hookedntravelАй бұрын
Depending on what sonar frequencies your using. 455 and a 1200khz is probably gonna be fine. But if their using ones close, then probably not. Or just shut down one transducer
@marcoluna4293Ай бұрын
Hi, thanks for great video helps alot. Is there a way to remove white outline or any outline from text? I dont mean the overlay, I mean the the text that is shown on the vector charts with outline makes it harder to read on smaller units.
@hookedntravelАй бұрын
Not sure what maps you have on your unit. You could try putting it in easy mode.
@MarcoLuna-bc5bhАй бұрын
@@hookedntravel Hi thanks for responding, I am using C-Map reveal on HDS Live 7. The outline appears on most of the chart text on both the reveal and the discovery that came with the unit and is much thicker than the outline on the overlay items that I created, I couldn't find any easy mode settings only found the option for chart are full, medium or low which end up removing the text from the chart completely and remove chart details.
@arnauddecotterАй бұрын
What app is it, can find this app on Google store. The link app.. I do have a screen mirror app on my Samsung s21.. but that usually works the over way. I am also using the lowrance fs9, wonder if that works too
@TheDuffman1986Ай бұрын
Very good, thank you
@user-ey2te5vs3zАй бұрын
How do you put it back to summer open water mode. Mine is stuck in ice mode
@tonyhanna1392Ай бұрын
Ive programmed as per your video bit in forward mode I am only getting about a 5th of the screen being used. Any ideas for a fix? Cheers.
@hookedntravelАй бұрын
How is the orientation of the transducer? Is the screen black?
@tonyhanna1392Ай бұрын
@@hookedntravel the transducer is pole mounted at the front of the boat. In forward mode the screen is about 2 inches wide on the left of my HDS9 and the rest is black.
@tonyhanna1392Ай бұрын
I was wondering if I should go back to factory default modes and start again?
@hookedntravelАй бұрын
@@tonyhanna1392 yeah maybe try that. Not hard to adjust settings again. Transducer is in the water when your using it? It’s really hard for me to troubleshoot from here. Is it in forward mode? Sometimes you might have to hit stable view on and off.
@tonyhanna1392Ай бұрын
@@hookedntravel its working fine in Scout mode. Ive sent Lowrance some photos of the set up and screen. Hopefully it will be something simple. Thanks for your help.
@rosskroeber6157Ай бұрын
Newbie Humminbird Helix Gen4 user here. Great setup video and while my head almost exploded with all the info, it showed me what settings I should focus on (for now). Will re-watch this a few more times! Thanks!!
@hookedntravelАй бұрын
Glad you enjoyed! Please like and subscribe!
@jaybee006Ай бұрын
Wow! I definitely learned a lot about my fish finder's capabilities! Thanks for posting this. Hopefully, I will put it to good use this weekend.
@hookedntravelАй бұрын
Good luck! Tightlines!
@kylehraines95Ай бұрын
What do you do with the red and black on active target when you hook the yellow from active target to yellow from the graph?
@hookedntravelАй бұрын
The yellow is just the wake-up wire. So it will turn on the active target when you turn on the fishfinder. That’s one way to do it. The other is tap the yellow into the red wire. Black wire goes to negative terminal on your battery and red to positive after you put an inline fuse then to battery
@robertcarey8644Ай бұрын
Great tutorial! Thanks for helping me set up my new unit.
@hookedntravelАй бұрын
Glad you found it helpful! That’s why we do it!
@MichaelMathis-kk9rkАй бұрын
Can I do this on an HDS Pro 10?
@hookedntravelАй бұрын
Yes you can. It’s got all the same features and operating system
@tonydaicar1663Ай бұрын
Awesome video!! Best on AT I’ve found!! Thanks so much!!
@hookedntravelАй бұрын
Glad you enjoyed it!
@billljones979Ай бұрын
You can check the voltage, at what voltage will the battery not start?
@hookedntravelАй бұрын
Depending on motor but usually once it get below 11 it will have trouble starting. Most mercs are around 11.
@billljones979Ай бұрын
@hookedntravel thank you Good to know
@darrellbean1722Ай бұрын
Man, 😊this is a GREAT VIDEO. Thank you
@hookedntravelАй бұрын
Glad you enjoyed it! Cheers
@captainmorgan5106Ай бұрын
My Brand new Elite FS 9 doesn't have alot of these setting you are showing here ? I have zero icons on the lefthand side of my screen. This thing just shuts down when it wants, then doesn't fire up until it wants to. Very frustrating ! This'll probably be the last Lowrance product I buy.
@hookedntravelАй бұрын
Are you talking the menu settings on the right side of the screen or the overlays? Do you have proper voltage? And could there be a loose connection at the back of the unit, a wire connection like at the fuse, or at the battery? Sometimes this will happen if it’s wired with proper wire gauge too.
@captainmorgan5106Ай бұрын
@@hookedntravel Thank you. I think it was voltage. I had 1 positive terminal tha was loose enough to cause that. On a couple of your screens it looked like you had a drop down menu on the left side. On thise same screens I didn't have those. Could you tell me why it doesn't seem to be picking up fish ? Ice got depth, water temp, coarse but zero fish when there's literally fish jumping all around my boat ? It didn't pick up even 1 fish after putting around for almost 3 hours ?
@hookedntravelАй бұрын
@@captainmorgan5106 it could be the main menu screen. Hit the gear icon and it will bring up the main menu. What’s the time stamp on the video so I know exactly what you mean? How deep are you? And do you have the sensitivity up?
@captainmorgan5106Ай бұрын
@@hookedntravel When you're showing the "look ahead" info at 1:35 you have some icons on the left of the map. Mine doesn't have those Icons on the left. I was in multiple depth from 10' - 85' for about 3 hours. It never marked a single fish. It was showing the depths and bottom contour just fine. I just didn't know if I had to literally turn on the fish finder part of this. I did have to go in and turn on the depth finder. When I fired it up the very first time the screen just showed "stopped". I had to KZfaq that and that's when I actually found out how to find the depth finder menu. It was like everything was turned off from the factory.
@hookedntravelАй бұрын
@@captainmorgan5106 those icons are there for the NMEA network. Basically extra features to hook into the NMEA network for hooking up to the engine, or motorguide or vessel view. It’s advance features only needed if you have those networked with extra purchases.
@subbassickАй бұрын
I am stuck between a helix 5 Down image or hook reveal 5 down also. Which would you get?
@hookedntravelАй бұрын
What’s the price points are you looking at?
@kenn1320Ай бұрын
Nice rig. What seat/post did you mount on the front deck?
@hookedntravelАй бұрын
Springfield plug in, and it had the stock alumacraft bicycle seat but I switched it out for the bass pro one. The stock one was too uncomfortable. Looks beautiful but still feels too hard
@kenestra123Ай бұрын
You can do these settings in demo mode or does it have to be in the water? Sorry for the dumb question. I had just heard somewhere that its not a good idea to run your lowrance with the transducer on unless its in the water to cool it.
@hookedntravelАй бұрын
the transducers are pretty durable but for best practice yes keep it in the water. If you're sitting in your driveway simply turn off the transducer and hit STOP. Do the settings, close as you can get them in the driveway until you're in the water. Also every lake, river, set of conditions your gonna tweak your settings anyways. When you are doing this video also have the demo mode off. In regular mode as if your in the water. Demo mode does not save settings.
@CTRadventuresАй бұрын
I just got the eagle 9 which apparently is the new version of the hook 9. I'm having trouble getting those images that come preloaded on the demo mode. In real life everything is so much more noisy
@CTRadventuresАй бұрын
It's weird I get a noisy image unless I'm getting fast than 4 mph
@hookedntravelАй бұрын
@@CTRadventures when you're adjusting your settings, you are having it on regular mode. We just do it on demo mode in store to simulate on the water. Do not do the settings in demo mode
@steveronschillАй бұрын
I am using a Lowrance HDS Live 12 and a Aqua-Vu Multi-Vu Pro Gen 2. When I connect everything and power up, I’m getting about 5 seconds of video on the HDMI source before the Lowrance switches back to Video 1 then it flips back to HDMI and repeats the cycle. I can't get it to stay on my HDMI feed. Any ideas what may be the problem?
@hookedntravelАй бұрын
loose connection on the port? Seems like its not connected properly
@fishinbite2 ай бұрын
Hey Kyle, which video is Joclyn referring to when he says "Kyle has a great video on waypoint management"?
@hookedntravelАй бұрын
lol, one I am still working on. It'll be called waypoint management. He thinks I can get these videos out with a snap of my fingers.
@fishinbiteАй бұрын
@@hookedntravel haha okay! Well I look forward to watching it in the future.