These new Volvos are some real nice machine to operate :)
@ConstructionChannelLuxembourgАй бұрын
Ah, thanks for that. That's something I would not have been able to figure out for myself because I'm not an actual operator. Is there an improvement between this and the E series?
@TheDanishConstructionChannelАй бұрын
@@ConstructionChannelLuxembourg Have to be honest, it's been some years since i last drove an Volvo, but i think the new one operates better than i remember the E series drive, it was smother and more harmonic in the hydraulics and it felt faster 🙂
@ConstructionChannelLuxembourgАй бұрын
@@TheDanishConstructionChannel Nice! I always wonder about electric pilot controls, because people are so married to the ability to feel the hydraulics on normal machines. Then again, my car has electric power steering, and I can't tell the difference at all. It's that good.
@TheDanishConstructionChannelАй бұрын
@@ConstructionChannelLuxembourg Have not been a fan of the electric pilot control some of the competitors have, but i think the once on the new Volvo felt really nice, but would have to try the machine at home for a longer period, to make the final verdict 🙂
@ConstructionChannelLuxembourgАй бұрын
@@TheDanishConstructionChannel I hope you'll get the opportunity to!
@DemolitionNews1Ай бұрын
Superb film Mr Grierson. That brings back some great memories.
@ConstructionChannelLuxembourgАй бұрын
Why thank you! They do indeed, and it was great to be in good company too!
@GacekspojlerАй бұрын
Nice compilation off all new equipment
@ConstructionChannelLuxembourgАй бұрын
Thanks, I'm glad you liked it!
@GacekspojlerАй бұрын
Do you know what is this square device on top of this Bell dumper?
@ConstructionChannelLuxembourgАй бұрын
Hi, Yes, the box on the dumper is an Xtonomy sensor system. It will read out the haul roads that the truck is traveling down, optimise the pathways, and drive the dump truck autonomously from the workface to the dump site / crusher. I have a video of it here: kzfaq.info5y-Kmd6h3u4
@mohamedfellague38452 ай бұрын
Bravo 👍 ❤❤
@ConstructionChannelLuxembourg2 ай бұрын
It's a beautiful machine!
@Gacekspojler2 ай бұрын
This red paint on counterweight looks beautiful.
@ConstructionChannelLuxembourg2 ай бұрын
Yeah, the design is fantastic, it's a very pretty machine.
@mohamedfellague38452 ай бұрын
Super 🌹 🌹
@dannyverheyen1232 ай бұрын
A shame I can only press like once
@ConstructionChannelLuxembourg2 ай бұрын
Thanks! You can watch it many times though, make me that good, good 1c per 100 views 😄
@alyaanali90152 ай бұрын
An excavator job can be found here am from Romania can you help me ❤
@ConstructionChannelLuxembourg2 ай бұрын
You see the name of the company, just apply to them.
@luisfigueiredo33132 ай бұрын
It's not a 936 but a 946
@ConstructionEquipmentLux2 ай бұрын
No it is a 936
@ConstructionChannelLuxembourg2 ай бұрын
There is also a 946 working on the same site, but the two-piece boom machine is definitely an R936 🙂
@csw6712 ай бұрын
Good work mate 👍
@ConstructionChannelLuxembourg2 ай бұрын
Hey, thanks a lot! Always end up a bit overwhelmed with these things, especially when I have about 3,5 hours of footage and have to start fiddling with what goes in and what comes out!
@user-xs5jn3bl5q2 ай бұрын
cat 325ng amazing machine
@ConstructionChannelLuxembourg2 ай бұрын
Yeah, it's a really solid 25 tonner!
@mohamedfellague38452 ай бұрын
Cool ✌️
@user-md9ys6rp2i3 ай бұрын
Тракторист, вроде так себе. Быстро убьет трактор😂
@ConstructionChannelLuxembourg2 ай бұрын
Hi, it's a demonstraation of the machine at an exhibition, not an operational quarry.
@user-md9ys6rp2i2 ай бұрын
Привет! Все ровно , зачем бить классный трактор)))
@ConstructionChannelLuxembourg2 ай бұрын
@@user-md9ys6rp2i Hi, it's a show. There are a few hundred people watching the machine perform.
@mohamedfellague38453 ай бұрын
Top merci ❤❤❤
@Vidarsteinsland3 ай бұрын
nice machine 🤩🤩. But it doesn't have as much equipment as I have on mine😜🤣
@ConstructionChannelLuxembourg3 ай бұрын
Yours has another 10 tonnes on this machine :D
@Vidarsteinsland3 ай бұрын
yes, but it doesn't matter much 😉👍. I have a lot of equipment that can't be seen from the outside🤩👍. We in Norway and Sweden usually have better equipped machines than the rest of Europe. But you come after and that's good🤩🤩🤩
@ConstructionChannelLuxembourg3 ай бұрын
@@Vidarsteinsland Yeah, I agree, speccing the machine with Oilquick and a tiltrotator would be pretty awesome, but I guess it all depends on how much you are willing or able to pay for a machine up front. I know a tiltrotator will save money over the life of the machine, but it often depends on the people with the money, and how much they want to spend.
@Vidarsteinsland3 ай бұрын
You're absolutely right there🙄. In our company they found out in 1994 that we saved money by having rototilt on the machines🤩👍Here in Norway they can't get machine operators if they don't have this equipment on😉👍. we machine drivers are picky in this country. We have oilquik and Rototilt on all machines in this country under 40 tonnes👍
@csw6713 ай бұрын
Handles the crusher well . Vid 👍
@ConstructionChannelLuxembourg3 ай бұрын
Thanks! Those 25t short radius machines are really versatile!
@mohamedfellague38453 ай бұрын
Super un bon paulo
@mohamedfellague38453 ай бұрын
Bravo ❤❤
@Vidarsteinsland3 ай бұрын
Awsome video🥳🥳. I feel a little sorry for the driver of that komatsu 🥲. They have made a terribly cramped cabin on those machines and with a terrible sliding door😳😳. It looks like they've moved a lot of cubicles there😳
@ConstructionChannelLuxembourg3 ай бұрын
Yeah, I wondered about that, do they have a shorter radius compared to other short tail machines with a standard-size cab? How many extra cm are they getting compared to a Hitachi or a Kobelco?
@Vidarsteinsland3 ай бұрын
@@ConstructionChannelLuxembourg They don't have any shorter turning radius at the back, but maybe a little at the front on the left corner. From experience of 40 years in the industry, it is so rare that this is a problem. There is a reason that Volvo, Hitachi, Livherr and CAT have moved away from this nonsense. While Komatsu drives on with a sliding door and cramped cabin😱😱🤣🤣🤣. Hitachi has the same 8 Ton cabin as the 25 Ton cabin, tight and nice😵💫😵💫. Kobelco also has a strange way of constructing their cabin. it's also tight when you're going to sit there all day😱. But CAT 335 and 325 have a large cabin on them and that's Nice 🤩🤩
@ConstructionChannelLuxembourg3 ай бұрын
@@Vidarsteinsland True, the Next Gen cabs on the short radius cats are quite roomy!
@dannyverheyen1233 ай бұрын
Lmao 😂
@ConstructionChannelLuxembourg3 ай бұрын
The cats usually try to help, but I guess they were a bit camera shy.
@tractors-plant-machinery3 ай бұрын
It's a shit job...........but some buggers got to do it! 🤣🤣🤣
@csw6713 ай бұрын
Good vid that 👌
@ConstructionChannelLuxembourg3 ай бұрын
Tap tap tap tap tap tap! Must be very satisfying to do the final clean-up!
@satricon3 ай бұрын
awesome machine!
@ConstructionChannelLuxembourg2 ай бұрын
It sure is!
@user-ue8qm2bi8u3 ай бұрын
I am interested company
@user-ue8qm2bi8u3 ай бұрын
I am interested company
@Gacekspojler3 ай бұрын
What were they digging over there?
@ConstructionChannelLuxembourg3 ай бұрын
They are digging up the railway embankment for the main train track that goes to the north. After digging up the track, they pushed a large concrete underpass (that was built on site) into position and replaced the track.
@Vidarsteinsland3 ай бұрын
Here in Norway we call the wheel machines wheel whores😱🤣🤣🤣 because they have to help everyone at the plant with different things. Good video as always 🤩🤩
@ConstructionChannelLuxembourg3 ай бұрын
Hahaha, yeah, they have to be the happy helpers on every site, because you can't just trundle your tracked machine from one end of the site to the other. 😀 We also have smallish (Volvo L35 type) wheel loaders for the same job. They get a lot of abuse though because everyone will hop onto them.
@Vidarsteinsland3 ай бұрын
I know that problem😱😱. We have a Volvo L90 that is not treated well😩😩. Everyone wants to drive it but no one takes responsibility. I'm probably the only one who doesn't want to drive it here at the facility🤣🤣
@ConstructionChannelLuxembourg3 ай бұрын
@@Vidarsteinsland Wow, and the L90 is definitely not a small 5t loader! It's not the kind of machine that 'doesn't matter' on site.
@Vidarsteinsland3 ай бұрын
We need that sice off wheelloader to load the dumpers with cruched stone and carrie the big pipes we use here in the trenches🤩👍