Fiber Laser Training

Пікірлер

@jolson8739 13 күн бұрын

after a year how is your business doing since this video was released

@FiberLaserTraining 13 күн бұрын

Well it is booming right now. We have been three weeks behind for years now. Almost four weeks out now. I have learned you’re either a KZfaqr or you operate lasers. I don’t have enough time in the day to do both, but we hope to get some more videos posted soon.

@jolson8739 13 күн бұрын

@@FiberLaserTraining THANK you reason i asked is because i currently have a cnc plasma table and still work full time in my trade of pipefitter/ welder. I have been slowly building up that side of my company and i can only show my family so much of that business side but want them to take a more hands on with some type of laser or engraving side

@kevsdesigns 26 күн бұрын

Where do you get those .2mm shims?

@FiberLaserTraining 20 күн бұрын

These came with the machine but Amazon carries them also.

@nside411 Ай бұрын

May have missed it in a previous video. What machine and wattage are you using? Thanks. Great video.

@FiberLaserTraining Ай бұрын

This particular laser is a 50w raycus laser.

@FiberLaserTraining Ай бұрын

This is a 50w Raycus.

@hakimkhadri9126 Ай бұрын

thank y

@JCourtneySoper Ай бұрын

Man i love to see you involving your boy, super wholesome. You're a good dad! love the videos

@FiberLaserTraining Ай бұрын

Thanks so much. We need to be doing more. Lol Not enough time in the day.

@Yukam1912 Ай бұрын

this is exactly i am intending to do teaching my daughters to learn this machine , so they collect money for higher education , i m the single atm of my house working at max capacity but still hardly making both ends meet , i m sure this machine will help us a lot

@FiberLaserTraining Ай бұрын

They’re so neat! We make good money from our lasers. I hope you also make it work greatly!!!!

@Yukam1912 Ай бұрын

@@FiberLaserTrainingthanks bro Which brand u recomend im more towards aeon

@FiberLaserTraining Ай бұрын

@@Yukam1912 I own an AEON mira7 co2 and it’s superb. The fibers though are mainly digital devices. I wouldn’t think twice about getting one from them. Tell Elisha that I sent ya.

@jimhamilton2680 3 ай бұрын

Thanks for the video. 1st time on your channel. Did using the fiber laser change the color of the engraving. I currently do not like how my coasters come out using a 10W diode. GRAY! Is there a way to engrave them WHITE?

@FiberLaserTraining 3 ай бұрын

The fibers natural color after it hits slate is usually bright white. I don’t have a diode so we do not really have a comparison.

@MikeFish1970 3 ай бұрын

Very nice work!! I just got into lasers a couple months ago...have been doing slate with my CO2 laser but wow when I can afford my next laser I'm getting a fiber...definitely following you know for more tutorials!!

@raphaelsolarin1434 3 ай бұрын

This Engraver will be useful for seal die brass coins. Please confirm.

@FiberLaserTraining 3 ай бұрын

It depends but yes it’s good for brass.

@raphaelsolarin1434 3 ай бұрын

Let me have the manufacturer's contact of this machine to make enquiry for the price, I will need this for engraving of company seal brass die coin. Thank you.

@FiberLaserTraining 3 ай бұрын

@@raphaelsolarin1434 These laser are from Hao Tian laser. On Facebook find Pascal Lui and tell him you want to buy. He will give you a great price if you mention my name.

@andrewbrady8202 3 ай бұрын

What are the costs of classes?

@FiberLaserTraining 3 ай бұрын

We charge $100 per hour and cover whatever you’d like. What are your issues?

@andrewbrady8202 3 ай бұрын

I have some questions

@FiberLaserTraining 3 ай бұрын

Whatcha got?

@andrewbrady8202 3 ай бұрын

How much is the classes?

@andrewbrady8202 3 ай бұрын

EZCAD3

@FiberLaserTraining 3 ай бұрын

Thank goodness this one uses ez2!

@millykate2089 4 ай бұрын

I hope I can win one. All the Way in the UK, England here 🇬🇧 Great Job Noah!

@FiberLaserTraining 4 ай бұрын

Awe! Super neat place! Thanks for watching. Cheers

@user-wm7wm1ul9s 4 ай бұрын

He hello kya m apse baat Kar Sakta hu

@FiberLaserTraining 4 ай бұрын

बिल्कुल।

@testingperson8413 5 ай бұрын

Coin: Pine tree and crescent moon.

@avexoidavex3577 5 ай бұрын

I know how to create 3d models, but I don't know how to draw in raster or vector programs. Can a laser machine accept a .stl file with the correct dimensions (e.g. 0.25 mm engraving depth)? Or do I need a vector or raster file?

@FiberLaserTraining 5 ай бұрын

Good question! Ezcad will accept stl in 2 and 3 Lightburn does a grey scale height mapping but yes. Should work with both.

@avexoidavex3577 5 ай бұрын

@@FiberLaserTraining Thanks for the reply! It helped me a lot.

@andrewbrady8202 5 ай бұрын

Hi Jeff I was wondering do you have any classes

@FiberLaserTraining 5 ай бұрын

We do offer classes. Go to www.laserableitems.com and book training at top of the page.

@andrewbrady8202 5 ай бұрын

Schedule “Laser Engraving 101” is closed Access to this schedule has been disabled by its owner( which it is what pop up when I clicked the website)@@FiberLaserTraining

@FiberLaserTraining 5 ай бұрын

@@andrewbrady8202 send me an email [email protected] We will get it straightened out.

@kelleycoon2070 5 ай бұрын

I Can see you’re covering the name of your laser up. Why

@FiberLaserTraining 5 ай бұрын

Good question! It’s from a company that went out of business and I would hate for people to look for the machine and it doesn’t pull up for a search. I use Hao Tian lasers.

@kelleycoon2070 5 ай бұрын

@@FiberLaserTraining thanks

@FiberLaserTraining 5 ай бұрын

@@kelleycoon2070 thank you for watching.

@MoAoRoKoY 5 ай бұрын

Unfortunately that wont work, who says the laser head case is parallel with the laser?

@FiberLaserTraining 5 ай бұрын

Not sure what you’re referring to that won’t work but we use the above method on all 9 of our galvo lasers and they’re all spot on. I can help you if you’d like. Just email me to set up a time. Good luck and thanks for watching!!!

@Critters 6 ай бұрын

How long did the coin take? What's the depth of the "cut"? and could you add slopes and topology instead of a binary "these parts are removed and these parts are untouched" ?

@FiberLaserTraining 6 ай бұрын

The coin took about one hour for each side. Lightburn has the ability to manipulate grayscale images that you could get your desire result with.

@keepthemomentum 6 ай бұрын

Love the shirt. Thats what I’ve been saying to my wife since I got my laser. 😄

@FiberLaserTraining 6 ай бұрын

Thank you so much. More videos to come soon.

@taylormcdermott2113 6 ай бұрын

Promo`SM 😳

@havocproltd 7 ай бұрын

WOW. JUST WOW.

@FiberLaserTraining 6 ай бұрын

Glad you enjoyed it!!! Share it everywhere. Lol

@LaserLivestream 7 ай бұрын

❤ Vegemite rules

@FiberLaserTraining 7 ай бұрын

Gil it was super incredible to meet you! Maybe we will do it down under next time and have Vegemite Sandwiches…. Hehehehe thanks for the breakfast also!

@LaserLivestream 7 ай бұрын

@@FiberLaserTraining Same here! Keep teach what you love and I look forward to following your videos and talking in person real soon. Now, go make something amazing!

@ronsilveira 7 ай бұрын

what do you think is the best way to polish the brass after engraving?

@FiberLaserTraining 7 ай бұрын

Good question! We usually tumble them if any polishing is needed. We use a vibration system.

@HaotianLaser 7 ай бұрын

thanks for your sharing

@FiberLaserTraining 7 ай бұрын

This was a great honor to be able to open this. Thank you Hao Tian

@HaotianLaser 7 ай бұрын

thank you sir@@FiberLaserTraining

@DoomwoodUSA 7 ай бұрын

My 50w gets here tomorrow. I think ours probably shipped to the US together. Thats neat man. Been watching a few of your videos. Im new to fiber lasers. Done a whole lot of CNC lathes and have a cnc plasma table. Im excited! Seeing this video on here was awesome! Once i get the fiber i may start a channel. Maybe.. lol

@FiberLaserTraining 7 ай бұрын

So it’s harder than I thought for sure. Lol. Glad you liked the video and if you ever need another laser definitely reach out to pascal Lui from Hao Tian !

@DoomwoodUSA 7 ай бұрын

@@FiberLaserTraining Definitely will be going through Pascal again. They do a great job!

@FiberLaserTraining 7 ай бұрын

@@DoomwoodUSA they are the best for sure!!!

@HaotianLaser 7 ай бұрын

Thanks!@@DoomwoodUSA

@paulclark304 7 ай бұрын

Good info. Thank you. Would love to see some tutorials on EzCad 3 and 2.5D engraving. Thanks.

@FiberLaserTraining 7 ай бұрын

For sure. We are so swamped I have found you’re either a KZfaqr or a laser engraver. Lol CANNOT be both. Hehehe. We will try to get some of those going!!!

@xcsy4468 8 ай бұрын

Awesome video as always, was as able to send it to a older gentleman learning the game and he got it down like butter!