Hi Sir. Thumbs up for nice help. Will you please so kind as to share the exact description or type od this weather strip.. Beacuse there are different types of MD product abailabe on Amazon....I can't figure up the exact type for Jeep cowel noise. I am far far away from you, in the Middle East.... I will be gratefyl for your help... Either please share a link of the product on Amazon or ebay or the exact description.... Thanks.
@allritythen2 күн бұрын
If you pause the video when the package is up on the screen you can see exactly which one it is, It is a marine and automotive weather striping. Also the cross section of the item is on it as well. I am sorry I don't have the exact part number. Realistically, any weather stripping you use will work.
@instigatorc3 күн бұрын
Thank you so much!!!
@allritythen3 күн бұрын
@@instigatorc anytime
@bluestardallastv423614 күн бұрын
Will This Work For My 2013 Dodge Durango It Just Happened Yesterday On My Way To Las Vegas Nevada???
@allritythen14 күн бұрын
Probably
@Trcdimbo18 күн бұрын
I’m having the same issue…thank God for this video. I’ll make a turn to home depot tomorrow.
@allritythen5 күн бұрын
good luck with the repairs. it will make your life much better
@joeulman22 күн бұрын
Used this video as the basis for my handle repair. Found this content to be spot on. The suggested part was a perfect fit. Thank you for your video.
@allritythen5 күн бұрын
Glad it helped
@shadoe1l023 күн бұрын
A very noisy video distraction oo much
@Firework_Fan23 күн бұрын
Great video! Little man was cracking me up the whole time lol! Thanks for helping 😅!
@allritythen23 күн бұрын
He was quite the handful but such a loving Boy
@blackrichard102924 күн бұрын
Well done. Good info and well presented. (Though the vid resolution is super low. But I'd guess you probably have that and the mic echo issue fixed by now since this is 5 years old.) I'd add that, going by online reviews I've seen since I purchased mine, and had issues, that many folks have had an issue with it sometimes working and sometimes not. (By far the most 1-star reviews I've ever seen for a DeWalt product.) My 682 was one of those and it was extremely frustrating the way it cut on and off. I never knew when it was going to work. But I found in those reviews a few people being helpful and describing that the issue is the battery making a constant connection in the body. What I read suggested taking the battery apart to sproing [technical term] out the contacts on the battery. I'd just moved and couldn't find my security bits so I couldn't take my battery apart but I _finally_ managed to find a thin/sharp tool (that was also strong enough) to be able to reach into the very tight space and lift the contacts enough to bend them such that good contact is made w/ the contacts in the body. After that it's been working beautifully! Nary an issue. Not once. And, for musicians, it's ****ing perfect for stringing/unstringing (or simply loosening strings to adjust truss rod or whatever) guitars and basses! Also works great on drum heads! I use mine so much for that, that I'm likely going to get one of the swivel ones for everything else that doesn't call for getting out the big guns. This works better than anything else I've tried for that purpose. The amount of control is simply amazing. I wish I could feather all my screwguns/drills, and other power tools, so precisely. None of that "oops, too much" or trying to very careful nudge up a trigger to hit the speed/torque you want. By now, it's starting to feel like an extension of my body almost. That said, the 682 at least isn't very heavy duty but I have other tools to fill those needs. Note I'm also hearing and seeing that DeWalt is no longer making the batteries. (WTF?) Are they going to quit making both screwdrivers? That would be a shame if they're not replaced. But, as far as I can tell, those two are the only 8V products. I could see an issue there. Cheers!
@allritythen5 күн бұрын
Thank you for your input and insight.
@konst339926 күн бұрын
❤
@conradfisher2563Ай бұрын
Thank you!
@allritythen5 күн бұрын
You're welcome!
@jeromeavery1177Ай бұрын
You the man, worked like a charm. Dealership was trying to send their kids to college on my dime.
@SILENTKILLA972Ай бұрын
I have an issue where it opens up just fine but when it goes to closes it moves a few inches stops and alarms 3 beeps. I've had it a few years now and never had this issue. I'm thinking it may be stretch in the chain but not 100% sure any tips?
@allritythenАй бұрын
I would check the bearings on the gate. When the gate is opening, it is not as sensitive to obstructions because it is opening so it thinks I can’t hurt anything. But when it closes, since there is a risk of crushing something it will reopen or stop. My guess is that the gates wheel bearings are done and need to be changed. Please let me now if that is the correct fix.
@SILENTKILLA972Ай бұрын
@allritythen without chain on gate moves fine by hand. I can still check the bearing but I believe they are fine
@SILENTKILLA972Ай бұрын
@allritythen another thing is if I retry it a couple times it will close I'm thinking maybe chain got stretched but not sure
@lindamek3Ай бұрын
Thank you for this video!!!!!Took 20mins !!!! tough to unplug the old handle connection.
@terried46482 ай бұрын
It same thing goin on my washer tryna this
@Denis4x42 ай бұрын
Forgive me for my English. Can you take a photo or record a video of how these headlights shine on the road? After all, this is the most important thing in them. It is even better to find a wall and show a black-and-white border with low and high beam on it. Thank you.
@allritythenАй бұрын
I don’t have the truck anymore but they did work perfectly when I installed them.
@Denis4x4Ай бұрын
@@allritythen Thank you. I have already ordered alpharex pro. They will come to Russia in a month and I will test them. At first I wanted to order an expensive LED series, but I found bad reviews and decided not to take any chances. I will install LED lamps in the pro and you should get the right and bright light. Yesterday I received LED fog lights from China, they shine perfectly. There is a clear border and there is more light than in the standard low beam.
@aircraftcj342 ай бұрын
You saved me money. That's amazing.
@JoeyMo9732 ай бұрын
What a great hack. I had added a whole new cowl to my cart online and got distracted and opened YT. Had already done some searching but other videos had the whole replacement as a recommendation. The algorithm gods must have decided to bless me as this was the first vid in my suggested feed. Depending on how elections go this fall I might roll to Florida to escape the liberal insanity and seeing you're a realtor I'll certainly holler. Thanks for the hack
@allritythen2 ай бұрын
Thank the gods
@juanmartinez-rb6wo2 ай бұрын
thank you sir🙏🏻
@777Janii2 ай бұрын
Thank you this was helpful
@allritythen2 ай бұрын
It was my pleasure
@bradthorne88252 ай бұрын
Thank you Just bought a hoop station, about to unpack it now
@Mesick893 ай бұрын
Thank you, brother! Saved me a ton of headache and got my old reliable back up and running smooth.
@allritythen3 ай бұрын
You are very welcome
@chrissyp50193 ай бұрын
About to go build one now. Thanks for showing how you prepared the ground first! 😊👍
@allritythen3 ай бұрын
Good luck. By this time it should be built already. Mine is still standing strong.
@lisac87353 ай бұрын
I have a 52533 model. How do u make the screen brighter
@lisac87353 ай бұрын
How do u make the screen brighter
@towerofsiloam95793 ай бұрын
My wife's missing some panties and is starting to wonder. I hope they're in that filter because I certainly don't have them, they were way too small.
@brendo3d3 ай бұрын
Anyone know where I can get the front panel too. Looks obsolete unfortunately. But some of my plastic pieces the screws go into were also broken
@brendo3d3 ай бұрын
Does it matter if you put the wiring backwards?
@allritythen3 ай бұрын
I don’t think that’s the best thing to do. Try to pay attention to the way the wires are. Take pictures before removing the cables and plugs.
@sampak77394 ай бұрын
I work for Keck of usc Dude was jerk But very tense. He talk a lot shit But he could back it off. He made blind people see again.
@girtsb27054 ай бұрын
ty
@barbaraslack63974 ай бұрын
Thank you
@allritythen4 ай бұрын
You're welcome
@steveschannel9614 ай бұрын
Excellent video. Thanks!
@keithjohnson51904 ай бұрын
Do not let the distiller shut off by itself, use a timer or manually shut it off after 3:30 hours. Don't let it run dry. You can clean it with the top off. you don't need lots of water to do it. After done boiling and the water in the glass or plastic cools I run it through a Brita pitcher, not needed but helps with the taste.
@rheylinsark1194 ай бұрын
Thanks so much for this easy-to-follow video! We ordered the replacement part from Amazon ($22.37 USD), and once we located the correct screwdriver head (T20 Torx), it took all of twenty minutes to install the new handle. Twenty bucks and twenty minutes sure beats a pricey service call from the Maytag Man!
@jameslambeth67634 ай бұрын
You just told everyone to throw alway the charcoal filter.
@allritythen4 ай бұрын
I know. I didn’t know what it was until til someone told me. I thought it was silica gel. Lol
@Robtorre94 ай бұрын
Thanks a lot for sharing infos about setup and cleaning.Much appreciated. Best Regards from Italy, say "Hi" to Cookie for me :D
@o-dogg98734 ай бұрын
Where do I buy that?
@allritythen4 ай бұрын
At most hardware stores and even Amazon.
@maethlin4 ай бұрын
Hero. People really uploaded like a hundred different videos talking about this unit on youtube yet none of them show how the spout is removed, several even edited that part out specifically lol was driving me crazy
@allritythen4 ай бұрын
It was my pleasure.
@davekolp45524 ай бұрын
Part was $44 dollars for me. Also, turn circuit breaker off before repair,
@djsmersh4 ай бұрын
Informative video, straight to the point. I do have a question ... you say your red shirt is sublimated, how do you sublimate white, there isn't a white ink for printers, that's why i have to use HTV? What's the secret?
@allritythen4 ай бұрын
This shirt I am wearing started out as a white roll of polyester fabric. It was sublimated using an industrial machine, then cut out and assembled. I had them made for me.
@sovanima4 ай бұрын
hi, thanks for your video explanation here. Evryone experience is unique but the process is almost the same. I have notice there are actually a lot of people with such complications on the tube and in younger age... You have mentioned you have had pvd already detached before the incident to happen. Can you remember your eye health before the incident, meaning your myopia progression, diopters and most importantly how long did it take for your posteriour to detach? There are people with pvd that lasts for years and years, respectfully tge eye gets bogger and bigger and doctors can never say how long and how bad it will affect the eye for everyones case but at least some other person experience might ease the anxiety a little bit. Thanks!
@allritythen4 ай бұрын
Most everyone will get PVD's. The more myopic, the sooner it happens. A PVD is not a big deal. They become a big deal when they fail to detach from the retina. When this happens, you get traction and it could lead to a macular hole or Cystic macular edema (CME). Before my accident, I was 20/10 best corrected after lasek (PRK). Before Lasek, I was a -2.50 In both eyes and had been for at least 15 years. My distance vision is pretty good, but presbyopia has set in and I need readers for my close up stuff.
@sovanima4 ай бұрын
@@allritythen Thank you
@chrismahfouz77095 ай бұрын
I gave a review on my Vevor distiller that wasn’t favorable. I felt like I needed to update that harsh review to be fair. I guess I happened to get a lemon the first time. It was purchased for me from Amazon as a gift from my daughter. We returned that one and my daughter ordered another one. The packaging was different -updated-and the machine works GREAT. I recommend this little machine because it makes my terrible municipal water clean. I’ve tested the water before and after and I’m so glad to have an economical way to have clean water for drinking and cooking at least. I literally use it every day. 3 1/2 hrs to a gallon of clean distilled water! I set it to run first thing in the morning or last thing in the evening before bed. I keep a two gallon glass dispenser full on my kitchen counter, a 1/2 gallon jug and a half dozen 16oz glass bottles to put in an ice chest at a moment’s notice for road trips. I also add about 1/4 tsp of Real brand “hymalayan” type salt from a Utah ancient seabed (no plastics) to every batch to add back some minerals and doesn’t alter taste. Very handy!
@constancescott60645 ай бұрын
OMG, THANK YOU SOOOO MUCH!!!! I got front end suspension work done in my car and it started making that buzzing noise the day after I picked it up. I drive on highway but usually in rush hour traffic. I drove over 70 mph the night before I dropped my car off and it was not making that noise. Then the 2nd day of having my car back hit 70 again and this annoying buzzing noise started. I thought they left a tool inside or loose screw, something???? Took it back to them they kept trying to charge for new wipers, “Are you crazy” I said. Took it to 7, yes 7 other mechanics and I got everything but your answer priced between $200 - $1000. I can do this myself. My mechanic is already mad at me because I change my own lights, he charges $40. A car hit my parked car and busted the tail light, blew out the directional light asked him to change it. (I had to work all day) He tried to charge me $450 and that was for a used tail light. No. You go ahead and keep that. I changed the directional light until I received the tail light unit which only cost me $70. I’m showing him your video!
@jimmyjames82055 ай бұрын
You still have the part numbers I need
@Wildhoneyfire5 ай бұрын
How often do you change out your charcoal bags? I had an issue cleaning mine for some reason but says to clean with a lemon also?
@allritythen5 ай бұрын
I don’t use them at all. Never have. I threw mine away by mistake thinking it was silica gel. But my water tastes just fine. Depending on where you live you might want to use them. In Miami Florida our water is pretty good and the charcoal bag is not needed.
@Wildhoneyfire5 ай бұрын
@@allritythen I'm in Pinellas County so we have pretty hard water. I can absolutely taste the difference 😅
@GordonShumway19105 ай бұрын
GO TO A SPECIALIST IMMEDIATELY if you have symptoms. Optometrists are useless. It could cost your vision
@allritythen5 ай бұрын
GREAT ADVICE👆👆👆
@Clayton_J5 ай бұрын
Love it
@user-rr8qg4qq9b5 ай бұрын
You're awesome! Thank you so much for posting. I've got my husband cleaning the oven door, as I type. :)
@allritythen5 ай бұрын
Tell your husband I’m sorry
@kyrenekyorl5 ай бұрын
Thank you so much! I had the two cords plugged together because the instructions that came with it are impossible to understand and I'm not good with electronics >.> Much appreciated!! ^_^
@pattydv26785 ай бұрын
Hello, mine dont finish the washing cycle keeps washing for a very long time and i have to stop and press drained. And i saw it gives me an erros code