I don’t know how there isn’t a good system to make it easy to check and inflate

I still love it

As long as you can look at the pad and see how much material is remaining it will be fine

Yeah that video is so funny! But he is taking off the Glock slide that has a full auto selector. I think you have to place it in semi auto to take it off due to the different mechanism in it. Even if I am wrong about that then there is only one other selector position to put it in. So basically he should have only needed to try it twice

Some are video learners but it is always good to consult the manual. I assume this an all my other how to videos will get deleted by KZfaq soon anyway

I returned it and haven’t found a replacement

I don’t understand what you are saying…..the holster is for the gun

@@martinrps13 the gun doesn't fit without the light.. That's what you said.

@@steven3379yes…that is how every holster that can take a light it. The light is the widest part so it is the retention method. They are all made like this: you chose gun make/model and then chose light make/model

@@steven3379 look at this video from the holster maker and skip to the 2:49 mark kzfaq.info/get/bejne/Z6dne9qA1NPSk2w.htmlsi=RF69FpoBu1WJJaIs

@@martinrps13 Someone should make a guide rod light or better yet a grip module with a built-in light, the trigger guard is the best retention system, not a fat big light that increases the space between the holster and the trigger guard. Instead of putting a "picatinny rail" put a switch

I am very ignorant of anything laser related, so just went with this company because I have many red dots from them and they are all great. I kind of gave up on finding a replacement

The Trueno is cheaper than that combo

You mean how I have everything laid out and ready to use on the truck bed

What mag? They all have longer ones….just by a few rounds. The Kel-Tec one is not being made anymore though

No like imagine a 1911 mag that widens out at the base of the grip into double stack. So like double stack single feed but so you can still hold 30 or 32 in a technically single stack only gun.

That is how my Ruger LCP max mag is

Protection is important

Thanks! Plan to do another update cause others have asked me about how to turn off all the annoying beeping

Tell that to holosun…….stop saying it is made for daylight use

Just trying to get one in the chamber and I didn’t bring the slide all the way back so did it again but the first time it actually did get a round

@@martinrps13 ok that make more sense now, you to chamber one get ready. But are we suppose to do it right way before you go out or in your car?, why wait during a middle of hiking to do it, if some body see it, and though you try to shoot them and they are carry too then……🤔🤫

@dannynguyen3367 I have been carrying with one in the pipe since this video

Then stick with the 2022 and 2023 years with a manual trans. The beeping crap does get old but can be turned off. Bad thing is when you turn eyesight off you don’t get cruse control at all

Why?

@@martinrps13 it looks all wavy, is it supposed to be like that?

@@Rat-34yep……spring is so long it does that. There are a lot of guns that the spring looks like this but people just typically don’t see it. The AK-47 is probably the most common gun that looks exactly the same

Start at the 2:20 minute mark on this this video and see another gun with a spring like that kzfaq.info/get/bejne/qt6ZeZyrmd-Rfmw.htmlsi=mvUWOdFBKbeD-BAz

IR is for those conditions, this is sold as a daytime use item

Hope not

Then don’t hit the buttons

Yeah, exactly. I want traction control/stability control on, I just don't want the annoying eyesight warning system on (PCB). It seems like the only way to specifically disable it is to manually go through the menu and disable PCB each time which takes several seconds. You might say it's not a big deal but it is still not something I want to have to do every time I start the car up. They should have just let you permanently leave it off like they did with the LDS. And I wish the bright warning off dash lights weren't there. Maybe if we're lucky they'll make a new firmware flash that allows this but I doubt it...

I have never used a RWD one but based on my use of this I don’t want to. Maybe if it had casters for the front to turn might make it better

Yep…..just a little upward pull on the handle and it goes up my hill fine

The name Subaru calls the camera system. There are two cameras mounted near the top of the windshield that control the smart cruse control, emergency braking, and lane departure warning

kzfaq.info/get/bejne/h6t0hrVynZOtqZs.htmlsi=w1N8VRHKj2qQDjSp

I noticed that also, good to know that there are some that appreciate an owner doing a review

I did clear tint on front…..sucks but don’t want to mess with them. Subaru failed by not having them flush like other companies

I have seen them and used them like that, totally fine

That is horrible

It’s a throwback to the one from the 80’s……had to get it even though I don’t like the looks or the red interior

@@martinrps13 What Red interior?

Door cards and seats stripes, and stitching

@@martinrps13 Whew! I thought you were gonna say Whole seats and door panels, and carpets? I hate those cars that have that Whore House interior. I didn't know if this special edition had that. I've seen some sports cars that had that red. Makes me want to vomit.

@bobarmstrong2122 I am totally fine with a few red accents here and there but what you were talking about is definitely horrible but I came from the Nissan club and my 240 SX has full black interior but they made brown and a weird bluish color one and those were both really strange

Also useless on the S&W….I just took it apart like I do all the glocks

Lmao are you trolling🤣

@@julianroth7681 I own Glocks. It doesn't need to be pulled lol

Make a video proving it

You need to watch this and see why Glock has only one model that DOESN’T need the trigger to be pulled kzfaq.info/get/bejne/j7Zyi5SJutrclHk.htmlsi=1umB1qxsvmJGUxYZ

@@martinrps13 bruh are you on something?

I live in the rust belt

The only person who will be disappointed is the criminal shooting me that thinks the cover he has will protect him. All I carry is FMJ

@@martinrps13 and your neighbor after you miss all your shots and over penetrate your drywall. On the topic of cover, since when did 9mm become anti material?

I am thinking that doesn’t happen….don’t see loads of articles about it happening and I have seen loads of autopsy reports that show FMJ still in the victim. We are talking 9mm……not some random hot round that is going 2200fps. Now in my “home defense” gun I have hollow point….but that is only to aid in cycling with the can. Running SS197 in the PSA Rock with a heavier can so it doesn’t like subs as and all those are FMJ. In my Stribog I have 147grain subs that are truncated FMJ….also with a can and done for cycling anticipation. But it all reality if shit was to hit the fan at home I am using my 16” AR-15 with green tips…..the only over penetration I have ever worried about. But for my random sweaty balls daily carry the Glock 43 with cheap ass Winchester white box is my go to. I say the most likely situation where I need to use a gun is defending against some road rage idiot that wants to hurt me…….that is the barrier I want my 9mm FMJ to defeat

@@martinrps13 Jesus Christ don’t dox yourself on the internet like that. We all knew you didn’t have any good ideas by the fact you carry FMJ, but you didn’t have to tell me ALL of your bad ideas

Ok

Yes….That is typical of almost all striker fired guns. Pulling the trigger moves the striker release thing (don’t know the real name) down so the striker can move foreword

kzfaq.infoIUrUPHUntQw?si=tO-8waMPO3vn64cu

This is why you have to pull the trigger on a Glock to disassemble kzfaq.info/get/bejne/it9jhtSKuNPZpJc.html

I priced the full auto ones today to see his they are still attainable for me…..nope. Going to have to stick to my semi ones